Screeching noise from engine - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

davidsn_670 · 10-15-2020, 09:32 PM

I'm leaning towards a belt tensioner pulley considering it does it under load. (A/C cycling and from a stop light)

bcj · 10-16-2020, 10:58 AM

Quote:

Originally Posted by Ultramaroon

+1 for sage advice.

And current covid-hair

humfrz · 10-16-2020, 01:22 PM

Quote:

Originally Posted by NoHaveMSG

And be careful around rotating parts. Sleeves, scarfs, masks, hair, hands. I have seen enough gruesome injuries from that shit in my industry to make me paranoid of anything that spins under force

Yep, some of us learned that at an early age. Now what could have gone wrong before OSHA?

NoHaveMSG · 10-16-2020, 01:32 PM

Quote:

Originally Posted by humfrz

Yep, some of us learned that at an early age. Now what could have gone wrong before OSHA?

One of the guys that worked next to me at the motorcycle shop had a good story. He used to work for this bridge company, worked in their shop and pre-fabbed components. He was drilling this deck plate on a drill press the size of a garage, bit was the size of a fir tree. He went to bat away the chip that was curling off the bit and it caught his glove. He spent the next minute running around the bit trying to keep up with it until the chip curled off long enough he could hit the emergency stop. And that is why you don't wear gloves or long sleeves while manning a drill press.

Ultramaroon · 10-16-2020, 04:59 PM

Quote:

Originally Posted by bcj

And current covid-hair

what?

kyoshi11 · 10-17-2020, 05:56 PM

I cleaned the pulleys and belt and heard the noise sometimes when revving to ~1200-1350 rpm. The sound could be heard louder at the exhaust and the middle of the car and I lifted the car to check all the bolts (exhaust) and they were all tight. I also noticed when the wheel is turned either ways the noise gets loud when moving under 5 mph. Currently running SWIFT springs on OEM dampers. Could this be a diff or transmission issue?

Ultramaroon · 10-17-2020, 07:32 PM

That's where the exhaust front pipe is bracketed to the transmission. That whole assembly vibrates and pivots as a unit. Get under there. Remove the bottom panels, and wiggle stuff.

If your jack stands and work area are good enough for you to get underneath the car, It's just as safe to start the engine while you're underneath it.

kyoshi11 · 10-21-2020, 01:57 AM

I found the clamp holding the heat shield to the front pipe is loose and probably causing the rattling. If I took that shield off, should I wrap it in a new heat shield?

Ultramaroon · 10-21-2020, 03:42 AM

Quote:

Originally Posted by kyoshi11

I found the clamp holding the heat shield to the front pipe is loose and probably causing the rattling. If I took that shield off, should I wrap it in a new heat shield?

Boom. Heat shield is important. Fix or replace the clamp.

Ultramaroon · 10-21-2020, 03:52 PM

https://parts.subaru.com/a/Subaru_20...10-440-02.html

kyoshi11 · 10-25-2020, 04:54 AM

(insert facepalm), i drove with the air conditioner on the other day and the noise came back... i guess it was not the heat shield

JD001 · 10-25-2020, 06:32 AM

Quote:

Originally Posted by kyoshi11

(insert facepalm), i drove with the air conditioner on the other day and the noise came back... i guess it was not the heat shield

And here I was thinking that the little crickets had mutated.

kyoshi11 · 10-25-2020, 06:51 AM

maybe it has 0_o but im thinking it could be a bad ac compressor??? but not sure what symptoms are for that

JD001 · 10-25-2020, 06:59 AM

Quote:

Originally Posted by kyoshi11

(insert facepalm), i drove with the air conditioner on the other day and the noise came back... i guess it was not the heat shield

Quote:

Originally Posted by kyoshi11

maybe it has 0_o but im thinking it could be a bad ac compressor??? but not sure what symptoms are for that

It sounds like a pulley/belt kinda thing as it's intermittent. Load application causing the screech.

10-17-2020, 07:32 PM	#21
Ultramaroon 義理チョコ Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 31,867 Thanks: 52,128 Thanked 36,519 Times in 18,920 Posts Mentioned: 1106 Post(s) Tagged: 9 Thread(s)	That's where the exhaust front pipe is bracketed to the transmission. That whole assembly vibrates and pivots as a unit. Get under there. Remove the bottom panels, and wiggle stuff. If your jack stands and work area are good enough for you to get underneath the car, It's just as safe to start the engine while you're underneath it. __________________ service manuals

10-21-2020, 03:52 PM	#24
Ultramaroon 義理チョコ Join Date: Sep 2014 Drives: a 13 e8h frs Location: vantucky, wa Posts: 31,867 Thanks: 52,128 Thanked 36,519 Times in 18,920 Posts Mentioned: 1106 Post(s) Tagged: 9 Thread(s)	https://parts.subaru.com/a/Subaru_20...10-440-02.html __________________ service manuals

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BRZ strange screeching noise	TOLM	Issues \| Warranty \| Recalls / TSB	13	12-19-2017 11:26 PM
question regarding screeching sound when accelerating	kudougw	Scion FR-S / Toyota 86 GT86 General Forum	12	07-18-2014 03:37 PM
Another Engine noise	Vegas86	Issues \| Warranty \| Recalls / TSB	4	10-09-2013 12:30 PM
Engine noise	somejace	BRZ First-Gen (2012+) -- General Topics	4	09-19-2013 06:39 AM
metalic screeching turning left	raptor87	Issues \| Warranty \| Recalls / TSB	2	01-18-2013 01:41 PM

10-15-2020, 09:32 PM	#15
davidsn_670 Member Join Date: Oct 2015 Drives: 2015 Scion FRS Location: Tacoma, WA Posts: 44 Thanks: 23 Thanked 11 Times in 8 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	I'm leaning towards a belt tensioner pulley considering it does it under load. (A/C cycling and from a stop light)

10-17-2020, 05:56 PM	#20
kyoshi11 Member Join Date: Apr 2014 Drives: BRZ Location: SoCal Posts: 19 Thanks: 1 Thanked 0 Times in 0 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I cleaned the pulleys and belt and heard the noise sometimes when revving to ~1200-1350 rpm. The sound could be heard louder at the exhaust and the middle of the car and I lifted the car to check all the bolts (exhaust) and they were all tight. I also noticed when the wheel is turned either ways the noise gets loud when moving under 5 mph. Currently running SWIFT springs on OEM dampers. Could this be a diff or transmission issue?

10-21-2020, 01:57 AM	#22
kyoshi11 Member Join Date: Apr 2014 Drives: BRZ Location: SoCal Posts: 19 Thanks: 1 Thanked 0 Times in 0 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	I found the clamp holding the heat shield to the front pipe is loose and probably causing the rattling. If I took that shield off, should I wrap it in a new heat shield?

10-25-2020, 04:54 AM	#25
kyoshi11 Member Join Date: Apr 2014 Drives: BRZ Location: SoCal Posts: 19 Thanks: 1 Thanked 0 Times in 0 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	(insert facepalm), i drove with the air conditioner on the other day and the noise came back... i guess it was not the heat shield

10-25-2020, 06:51 AM	#27
kyoshi11 Member Join Date: Apr 2014 Drives: BRZ Location: SoCal Posts: 19 Thanks: 1 Thanked 0 Times in 0 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	maybe it has 0_o but im thinking it could be a bad ac compressor??? but not sure what symptoms are for that

User Name		Remember Me?
Password