WHAT DID YOU DO TO YOUR FRS TODAY?

[Captain_Awesome_Pants]

Originally Posted by EnoOnraefi

I did some vinyl work as well... install the intech high point brake that has been sitting in the car in its box for a few days
.

Man, I've been eyeing that high point brake light. How do you like it?

Originally Posted by ichitaka05

Damn, you guys are good... I did my dash panel and it was a bitch!

Any tip on doing the inside or the hole area?

Patience and heat. You're looking at my second attempt... I stretched the whole piece across, heated it, formed/stretched, heated, form/stretched. Cut a hole in the middle, then as I went on I split the hole in a bit of a criss cross star pattern (looks like this -> *) as I stretched and allowed it to get bigger. Not sure if it makes sense, but that's how I did it.

[EnoOnraefi]

Originally Posted by Captain_Awesome_Pants

Man, I've been eyeing that high point brake light. How do you like it?

I love it. It clears up the window so we'll! I dremeled off the tab that they want you to put over the headliner and instead used thin strips of 3M foam tape around the entire perimeter of the light to make sure it's not going anywhere.

Originally Posted by ichitaka05

Damn, you guys are good... I did my dash panel and it was a bitch!
Any tip on doing the inside or the hole area?

My personal preference is to leave no square edges on the inner perimeter that you are going to be stretching. Square inner corners are what killed me on the shifter trim... It ripped as I was trying to stretch it, after I figured that out it was smooth sailing everywhere else.

[Ojoshcaal]

added some red trim to the rear what do you guys think? I'm open to honest opinion

[arxm]

Originally Posted by Ojoshcaal

added some red trim to the rear what do you guys think? I'm open to honest opinion

doesn't look bad if you ask me, it seems a bit out of place though, kind of like those red rim protectors you put on the lip of your wheels I think if you isolated the red to bring attention to something specific like the tips instead of the whole diffuser it might look sharper but again by no means is it bad right now

[Ojoshcaal]

thanks for your opinion , okay i see what you mean, kind of just testing waters right now im still waiting on a lip and i was going to put some red to outline where the bumper and lip meet cause i put on the red jdm piston badges on the garnish and having only that being red kinda was off to me. so i wanna see how it turns out

[James The Giant]

Originally Posted by MyNameIsKeh

Nice! got any more pics?

[PDM 2]

well guess who fk'd up and went the wrong way loosening the bolt on top of the stock 4th brake light...



any tips or suggestions on how to get this sucker out without cutting the whole black piece off ? i need the hole back to mount the new 4th brake light..

[allegiance2me]

Originally Posted by Ojoshcaal

added some red trim to the rear what do you guys think? I'm open to honest opinion

Just a question and I bet I'm going to sound dumb but oh well. Why do people blackout their license plate?


Sent from my iPhone using Tapatalk

[James The Giant]

Made this wild shift knob out of an old tap handle...

Probably not going to rock it regularly as its not as comfortable to use as the stock one, but turned out pretty good for a whacky spur of the moment project. It took a surprising amount of dremelling to get the adapter to fit in there, but Im pretty happy with the result. I didnt exactly buy this car to be taken seriously lol

[James The Giant]

Originally Posted by PDM 2

well guess who fk'd up and went the wrong way loosening the bolt on top of the stock 4th brake light...



any tips or suggestions on how to get this sucker out without cutting the whole black piece off ? i need the hole back to mount the new 4th brake light..

Id use a dremel with a cutting wheel attachment. Just be a little careful, should be super easy

[VMRamos]

Originally Posted by OrangeGuitar

Normally you can swap in other parts and pay the difference in price if there is any. Accidents can be an upgrade opportunity with the repair shop of your choice.



Sent from my iPhone using Tapatalk

Thanks for the tip! First time making a claim so I was unsure.

[Impureclient]

Originally Posted by allegiance2me

Just a question and I bet I'm going to sound dumb but oh well. Why do people blackout their license plate?


Sent from my iPhone using Tapatalk

Answer:
http://jalopnik.com/5941797/should-y...ates-in-photos

[Ojoshcaal]

Originally Posted by allegiance2me

Just a question and I bet I'm going to sound dumb but oh well. Why do people blackout their license plate?


Sent from my iPhone using Tapatalk

dw not a dumb question idk i just felt like i should cause this i like a worldwide forum, but honestly idk why

[humfrz]

Originally Posted by PDM 2

well guess who fk'd up and went the wrong way loosening the bolt on top of the stock 4th brake light...

....... rightsie tightsie ...... lefty losie ....... (unless it's a left handed threaded thing ...... then that takes a left handed monkey wrench.)


humfrz