|
Engine, Exhaust, Transmission Discuss the FR-S | 86 | BRZ engine, exhaust and drivetrain. |
|
Thread Tools | Search this Thread |
09-11-2013, 12:05 AM | #1 |
Turbo FR-S
Join Date: May 2011
Drives: 2013 Scion FR-S
Location: Pearland,TX
Posts: 680
Thanks: 227
Thanked 269 Times in 150 Posts
Mentioned: 12 Post(s)
Tagged: 0 Thread(s)
|
86 Motoring Lightweight Pully Kit - Impression
Straight forward install once everything was out of the way. Took maybe 20-25 mins with some goofing off. Might be a "little bit more difficult for the common drive if you don't have a socket big enough for the alternator bolt. But easy to solve buy borrowing from a friend who has one. Crank pully had a significant amount of weight difference, with the alternator and water pully only have a slight difference in weight but give the engine bay especially mine the much cleaner look I am going for. Throttle response has increased a good amount. Much smoother pull through the RPMs now in my opinion. Not sure how much horsepower I have actually gained if any, but with the better throttle response, the car is much more fun to drive. Overall I highly recommend this kit! @86motoring
Tools Needed: 10mm Socket 14mm Socket 22mm Socket 24mm Scoket Ratchet Wrench Cheater Bar Torque Wrench Pics: Installed - Crank - Alternator - Water Pump -
__________________
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
BUDDY CLUB Lightweight Racing Wheels - JDM, lightweight, low pricetag | 18x8.5" | GuerillaRacing | Wheels and Tires | 116 | 01-20-2015 06:32 PM |
Perrin Crank Pully | firl21 | Engine, Exhaust, Transmission | 27 | 09-15-2014 07:50 PM |
Visconti STG1+ kit not shipping with smaller pully. | Adeets | Forced Induction | 6 | 06-05-2013 12:32 PM |
CEL After PERRIN Crank Pully Install | milko002 | Engine, Exhaust, Transmission | 9 | 02-05-2013 02:11 PM |
My first 100 mile impression | bdbx18 | BRZ First-Gen (2012+) -- General Topics | 20 | 12-12-2012 11:42 PM |