Washer Fluid Spray - Low Flow - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

RT-BRZ · 03-14-2024, 09:45 AM

I feel stupid for posting this but the solution is escaping me.

Running the washer on the windshield results in a spray that's about 6" or so out the nozzles.

I've blown out the lines and cleaned them with vinegar/distilled water. The spray using that level seems to be fine.

I've replaced the factory washer pump with a Trico aftermarket pump.

The results are the same. The spray is the same out of each side.

What am I missing?

DarkPira7e · 03-14-2024, 11:24 AM

Have you taken a pin to the nozzle heads yet? I used to see people have crystalized buildup from Rain-X orange fluid in the mid 2000s that you'd have to clear annually using a pin

RT-BRZ · 03-14-2024, 11:46 AM

That's literally the only thing I haven't done. I have the cowl off the car and I've continued to test it and nothing seems to change.

Honestly, it almost seems like the pump isn't making enough pressure but I'll try the pin idea next.

03-14-2024, 09:45 AM	#1
RT-BRZ FNG Join Date: Jan 2021 Drives: 2013 Subaru BRZ Location: Columbus, OH Posts: 236 Thanks: 297 Thanked 148 Times in 88 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Washer Fluid Spray - Low Flow I feel stupid for posting this but the solution is escaping me. Running the washer on the windshield results in a spray that's about 6" or so out the nozzles. I've blown out the lines and cleaned them with vinegar/distilled water. The spray using that level seems to be fine. I've replaced the factory washer pump with a Trico aftermarket pump. The results are the same. The spray is the same out of each side. What am I missing?

03-14-2024, 11:24 AM	#2
DarkPira7e Rust bucket enthusiast Join Date: Feb 2017 Drives: 2013 Turbo Firestorm FRS Location: Vermont Posts: 3,934 Thanks: 3,200 Thanked 4,095 Times in 2,045 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Have you taken a pin to the nozzle heads yet? I used to see people have crystalized buildup from Rain-X orange fluid in the mid 2000s that you'd have to clear annually using a pin __________________ Turbo FR-S Build - Build Thread JDL EL Recirc manifold, Boostlab BL58x Turbo w/ T51R, 17x9 ARC-8, IAG block

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washer fluid not spraying out	btan219	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	37	09-16-2019 05:35 PM
Washer fluid fill	Andrew025	Mechanical Maintenance (Oil, Fluids, Break-In, Servicing)	49	07-02-2017 12:13 AM
Washer fluid tank, need to fix asap.	SavingManuals	Electronics \| Audio \| NAV \| Infotainment	0	11-22-2015 06:12 PM
Washer Fluid Indicator	Tdot	BRZ First-Gen (2012+) -- General Topics	58	02-19-2013 04:02 PM
FYI - Washer Fluid light	Ben_G	BRZ First-Gen (2012+) -- General Topics	48	01-03-2013 04:18 PM

03-14-2024, 11:46 AM	#3
RT-BRZ FNG Join Date: Jan 2021 Drives: 2013 Subaru BRZ Location: Columbus, OH Posts: 236 Thanks: 297 Thanked 148 Times in 88 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	That's literally the only thing I haven't done. I have the cowl off the car and I've continued to test it and nothing seems to change. Honestly, it almost seems like the pump isn't making enough pressure but I'll try the pin idea next.

User Name		Remember Me?
Password