Mid-Atlantic Sale Thread

[ort895]

I have a works ABM that im looking to sell. Looking for $300. I have some pics for those that are interested.

[gkubed]

Originally Posted by Grimlock

A sports sedan of some sort. I recently got married, so the two of us and the dog don't fit very well in the BRZ. Plus, in general it's probably about time I get a true 4 seat vehicle.

Congratulations on the marriage, anyway

[MarkR171]

TRD swaybars ready to go to new owner. Front bar was only on my car for 3 months. Rear bar was on for 7 months.

$250

[nanxun]

sorry. posted in the wrong place. for correct placement see: http://www.ft86club.com/forums/showthread.php?t=115740

looking to replace my recently totaled Mazda3 hatch with a 2014 FR-S w/AT and under 40k miles

i'm located in NoVA (Fairfax County) but am willing to go most anywhere in the DMV area.

thx in advance for reading

[MarkR171]

Decided to part with my RPF1s. 17x9 ET45. I have a pair of 5mm and a pair of 10mm spacers (Enkei 5mm and Mach V 10mm, both hubcentric) that I'll throw in the with the wheels.

Michelin Super Sports with 245/40/17 all around included. Tires were purchased on June 27th, 2016 and still have 9/32" tread left - I just went to the garage to measure with a tire tread depth gauge. TPMS is included and installed. I have the print-out from TireRack with the TPMS sensor serial numbers so you can get them programmed without having to dismount the tires.

Wheels are in great shape except two wheels being curbed after I stupidly curbed them rushing into the DCA economy parking lot rushing to make my flight to go pick up the Alfa. I just used a sharpie to touch them up and they look great, but some of the Sharpie has been washed off (after 4 months.) Another pass with a sharpie or some black paint will make them look near-perfect.

Picture is of the worst wheel. Two wheels are perfect, two are curbed.



On the car as of last weekend when they were on last (stock suspension, 10mm spacer front and 5mm rear - both included)...



Will sell all, including spacers for $1000

Edit: will also include the FT86speedfactory "86" logo centercaps shown in the last picture..
http://www.ft86speedfactory.com/ft86...l#.WKpNBRIrJE4

[Bowen]

Originally Posted by MarkR171

Decided to part with my RPF1s. 17x9 ET45. I have a pair of 5mm and a pair of 10mm spacers (Enkei 5mm and Mach V 10mm, both hubcentric) that I'll throw in the with the wheels.

Michelin Super Sports with 245/40/17 all around included. Tires were purchased on June 27th, 2016 and still have 9/32" tread left - I just went to the garage to measure with a tire tread depth gauge. TPMS is included and installed. I have the print-out from TireRack with the TPMS sensor serial numbers so you can get them programmed without having to dismount the tires.

Wheels are in great shape except two wheels being curbed after I stupidly curbed them rushing into the DCA economy parking lot rushing to make my flight to go pick up the Alfa. I just used a sharpie to touch them up and they look great, but some of the Sharpie has been washed off (after 4 months.) Another pass with a sharpie or some black paint will make them look near-perfect.

Good price, I'd be interested but they're not et35s 😉

If you don't get enough traction on here, hop on the mid Atlantic 86 group on Facebook. Lots of stuff for sale so the page gets a lot of attention.

GLWS!


Sent from my Pixel using Tapatalk

[DerrickA]

Originally Posted by MarkR171

Decided to part with my RPF1s. 17x9 ET45. I have a pair of 5mm and a pair of 10mm spacers (Enkei 5mm and Mach V 10mm, both hubcentric) that I'll throw in the with the wheels.

Check your messages...

[pioneer1109]

looking for LCA preferably voodoo but if anything out there similar let me know please

[xjohnx]

Originally Posted by Mufasah

Looking to buy a Nameless Axleback 3" Inlet 5" Mufflers.

Tell your friends to tell their friends

talk to @civicdrivr

[Grishbok]

I need a passenger side fender, painted raven. I was called in to the OR and while working with the surgeon, someone murdered my fender.


If you have an oem raven fender, please let me know.

[rns294]

Originally Posted by Grishbok

I need a passenger side fender, painted raven. I was called in to the OR and while working with the surgeon, someone murdered my fender.


If you have an oem raven fender, please let me know.

Are you just looking so you don't have to report to insurance? Because if I'm not mistaken this would come from comprehensive coverage, which you would just pay a deductible and your rates won't increase. That is probably cheaper than trying to buy a fender depending on your deductible.

[Grishbok]

Originally Posted by rns294

Are you just looking so you don't have to report to insurance? Because if I'm not mistaken this would come from comprehensive coverage, which you would just pay a deductible and your rates won't increase. That is probably cheaper than trying to buy a fender depending on your deductible.

Well, the answer to that is yes. My rate would actually go up. The other side of the car got hit in the exact same fashion a few weeks ago, that repair had to be made with an insurance claim of totaling 5k. If I can get a raven fender for 150, that would be cheaper than my deductible and keep my rate from going up due to having filed two claims.

[civicdrivr]

Originally Posted by civicdrivr

1. Nameless Axleback SOLD
   
2. Billet Pro Shop short shifter - I've had this installed for about 30k miles. Shortens throws by about 25%. The original black anodized lockout is included, however the red anodized lockout is installed. The rattle from the lockout has been fixed. Asking $100 obo.
   
3. Airaid Intake - Has about 20k miles on it. Comes with black lid and dry element filter (no oil). Asking $125 obo.

All items are located in the Richmond, VA area. I am willing to meet within a reasonable distance.

Axle back sold; still have the shifter and intake.

[Mufasah]

Selling a Top Speed Pro 1 Catback; been on the car for about 10k mi.

No damage at all - open to offers!

Silver Spring, Maryland 20904