Rubbin is racing’ — wheel rubbing issue - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

SpeBud07 · 01-23-2023, 06:04 PM

I am fighting a wheel rubbing issue in a 2013 FRS with the following mods:

TWS 18x9.5 et 45 with 255/35 Bridgestone Potenza Sports
Racecomp SS-1 coilovers
1.5 degrees of camber upfront

At full lock or close to it, I still rub a little at the top of the wheel well. Back it off to 1.0 degrees? 245/35 tires up front? I wanted a square setup, but since my wife works for Bridgestone that’s not a huge issue. The wheels are flush now, so much of a spacer might look dumb.

Thanks for any ideas!

NoHaveMSG · 01-23-2023, 06:33 PM

You can raise your ride height a bit. About all you can do, narrower tire will help some, but you may still hit. My car rubs in the front and on top.

SpeBud07 · 01-23-2023, 06:46 PM

Quote:

Originally Posted by NoHaveMSG

You can raise your ride height a bit. About all you can do, narrower tire will help some, but you may still hit. My car rubs in the front and on top.

Do you mind sharing what your road to fender bottom is? I’m at 25.5 I think.

NoHaveMSG · 01-23-2023, 07:49 PM

Quote:

Originally Posted by SpeBud07

Do you mind sharing what your road to fender bottom is? I’m at 25.5 I think.

I'll check when I get home in a couple hours. I believe I am lower than that. I also am on 245 17x9 +35 and sometimes a 235 17x9 +38 with an extra .5 degree of caster.

There are also steering limiters if it is only happening at close to full lock.

https://www.verus-engineering.com/sh...pra-1042#attr=

NoHaveMSG · 01-23-2023, 09:22 PM

Quote:

Originally Posted by SpeBud07

Do you mind sharing what your road to fender bottom is? I’m at 25.5 I think.

I'm at 24" 5/8 in the front.

x808drifter · 01-24-2023, 07:44 AM

Get skinnier tires and wheels. Only you give a shit ow the car looks.
A half inch isn't gonna do shit in terms of looks.

SpeBud07 · 01-24-2023, 09:39 AM

Quote:

Originally Posted by x808drifter

Get skinnier tires and wheels. Only you give a shit ow the car looks.
A half inch isn't gonna do shit in terms of looks.

You'd think someone who lived in paradise would have a rosier disposition, but thanks for the note. Before I do that, I just want to make sure I've chased other avenues that are less expensive.

Vital · 01-24-2023, 09:51 AM

Try the 245/35 tire or could even get a 3mm spacer

x808drifter · 01-26-2023, 05:43 AM

Quote:

Originally Posted by SpeBud07

You'd think someone who lived in paradise would have a rosier disposition, but thanks for the note. Before I do that, I just want to make sure I've chased other avenues that are less expensive.

You would. But you'd be mistaken.

soundman98 · 01-27-2023, 08:54 PM

Quote:

Originally Posted by x808drifter

You would. But you'd be mistaken.

i dunno, i can't even stand the word 'tourist'

x808drifter · 01-29-2023, 05:21 AM

Quote:

Originally Posted by soundman98

i dunno, i can't even stand the word 'tourist'

ツーリスト?

01-23-2023, 06:04 PM	#1
SpeBud07 Member Join Date: May 2022 Drives: 2013 FRS Location: TN, US Posts: 49 Thanks: 36 Thanked 15 Times in 9 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Rubbin is racing’ — wheel rubbing issue I am fighting a wheel rubbing issue in a 2013 FRS with the following mods: TWS 18x9.5 et 45 with 255/35 Bridgestone Potenza Sports Racecomp SS-1 coilovers 1.5 degrees of camber upfront At full lock or close to it, I still rub a little at the top of the wheel well. Back it off to 1.0 degrees? 245/35 tires up front? I wanted a square setup, but since my wife works for Bridgestone that’s not a huge issue. The wheels are flush now, so much of a spacer might look dumb. Thanks for any ideas!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front right wheel is rubbing	86zn6	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	15	07-06-2020 10:15 AM
Help with slight wheel rubbing.	BEZO760	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	19	07-11-2019 10:37 AM
will this wheel and tire combo fit with stock suspension without rubbing?	Andreasbrz14	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	9	05-23-2017 04:25 PM
Will this set up be a rubbing issue	Astroboy	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	7	02-02-2014 08:15 PM
How to tell if front wheel is rubbing against strut?	shu5892001	Wheels \| Tires \| Spacers \| Hub -- Sponsored by The Tire Rack	14	05-08-2013 09:54 AM

01-24-2023, 07:44 AM	#6
x808drifter LMGTFY Join Date: Mar 2016 Drives: 13 FRS, 91 Miata Location: Lava Town, HI Posts: 2,514 Thanks: 5,024 Thanked 3,234 Times in 1,442 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Get skinnier tires and wheels. Only you give a shit ow the car looks. A half inch isn't gonna do shit in terms of looks.

01-24-2023, 09:51 AM	#8
Vital Senior Member Join Date: Jun 2016 Drives: 2015 BRZ Location: Texas Posts: 688 Thanks: 212 Thanked 334 Times in 253 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Try the 245/35 tire or could even get a 3mm spacer

User Name		Remember Me?
Password