20mm H&R spacer + Volk te37

[edo475]

Hi
I refurbished an older set of te37 7.5x17 +48 recess area between holes 2-3 mm.
Looking to add a set of bolt on 20mm H&R spacers.
Will the stock studs hit the back of the rim?
Thanks

[Leonardo]

Originally Posted by edo475

Hi
I refurbished an older set of te37 7.5x17 +48 recess area between holes 2-3 mm.
Looking to add a set of bolt on 20mm H&R spacers.
Will the stock studs hit the back of the rim?
Thanks

Yes, you will need 25mm bolt on spacers to clear the studs. This will make your wheels poke like a 17x9 +42.


look at post# 25 And this is on stock suspension. this is a 17x9 +42
http://www.ft86club.com/forums/showt...t=56878&page=2


My front wheel pokes out an additional 12mm compared to this. And I was able to tuck the top of my tire with only a set of camber bolts set at -1.4 camber. (not even maxed)