ACE Header Independent Testing Results and Review - 199.6WHP on CA 91 Octane

[sw20kosh]

Originally Posted by sales@delicioustuning.com

We've just gotten an Ace 4-2-1 on our shop BRZ, and will be doing some dyno testing tomorrow to see what we can pull out of it. Initial impressions are quite good!

Sincerely,

Zach
Delicious Tuning

YESSSS!!!!!

[sw20kosh]

Uh this header delivers. Damn!

[wizzo]

Waiting for an N/A tune on this header

Originally Posted by sales@delicioustuning.com

Bill's BRZ did have an Innovate kit, but it was sold. We're now doing NA testing with the Ace on Bill's BRZ.

Sincerely,

Zach
Delicious Tuning

[CounterSpace Garage]

Originally Posted by wizzo

Waiting for an N/A tune on this header

[wizzo]

Originally Posted by CounterSpace Garage

PM please?

Atleast a small ETA, i was about to jump on a tune from someone local but dont trust tuners here :/

[CounterSpace Garage]

Originally Posted by wizzo

PM please?

Atleast a small ETA, i was about to jump on a tune from someone local but dont trust tuners here :/

Proper setups take time. We aren't the type to rush things (and so are the manufacturers we support) just for the sake of sales. Everything we do has a reason behind it and like any good engineering practice would aim for is to make sure everything is reliable, good performing, safe, and consistent before it can be released.

[CSG Mike]

Originally Posted by wizzo

PM please?

Atleast a small ETA, i was about to jump on a tune from someone local but dont trust tuners here :/

Sorry, it's ready when it's ready. If you're in a rush, then your local tuner or an e-tuner will be your only option.

If you want it done our way, then hold your horses and we'll make an announcement when we're comfortable with offering an Ace specific tune

I don't know how many tuners have tuned an Ace header, but it's not many at this point.

[wizzo]

I dont mind waiting, but it makes a difference when it might take 1 month, 2 months or 1 year

We also dont know what you are working on so it makes it hard for us to judge the ETA...

Originally Posted by CSG Mike

Sorry, it's ready when it's ready. If you're in a rush, then your local tuner or an e-tuner will be your only option.

If you want it done our way, then hold your horses and we'll make an announcement when we're comfortable with offering an Ace specific tune

I don't know how many tuners have tuned an Ace header, but it's not many at this point.

[AlexBinJackson]

Originally Posted by wizzo

I dont mind waiting, but it makes a difference when it might take 1 month, 2 months or 1 year



We also dont know what you are working on so it makes it hard for us to judge the ETA...

Unfortunately it's gonna take time Wissam you could just talk to bill and do the custom tuning if you need the tune now. Pretty sure bill at delicious can accommodate through logs

[CSG Mike]

Originally Posted by wizzo

I dont mind waiting, but it makes a difference when it might take 1 month, 2 months or 1 year

We also dont know what you are working on so it makes it hard for us to judge the ETA...

Again, we have no timeframe. I would recommend you work with a local tuner if an announcement is not made for a tune by the time you receive your order, so that you can get maximum enjoyment from your header.

We're not going to put an artificial ETA on the tune, which can potentially force us to put out a tune that is less than 100% to meet that deadline. 98% doesn't work for us.

[olsonpg]

Just had mine remotely tuned by Mike at MotoEast. Car runs like an absolute beast now with just e85 and Ace. Very very happy.

Thanks again Mike if you read this!

P.s. Remote tuning is way easy and a lot of fun.

[DTH]

Is there anywhere a dyno graph comparing the 150, 250 and 350 OP lengths?

[CSG Mike]

Originally Posted by DTH

Is there anywhere a dyno graph comparing the 150, 250 and 350 OP lengths?

Not yet

[CSG Mike]

Ace header + Ace front pipe + E85.... vs 370Z Nismo with full bolt-ons.

[ame="https://www.youtube.com/watch?v=GpyVx4Wu9L0"]BW13CW 10152015 - YouTube[/ame]