does OFT have a specific tune for any catted header?

[kowalski]

Originally Posted by Tectoniic

ft86 speedfactory

¿How is it going so far? I also did install ft86 UEL catted headers. I ran stage 2 v3 tune (91 octane - Shiv told me it would be ok as this tune was almost as aggressive as stg 1 93 octane). But it did not felt right. Vibration issues, slow reprise at low rpms...whereas stage 1 (93 octane) with the same catted headers felt more stable and had more omph at that torque dip.

One thing I noticed, though, is that it gets harder to reach high end speeds with stg 1. Even stock with no aftermarket header the car coul'd reach 230 km/h more easily. So I am very curious to know your experience. ¿Have you stayed with stage 2? ¿Have you got any issues?

Hopefully final OFP beta tests will come to an end and we will be able to enjoy the new tunes

best,

[Tectoniic]

Originally Posted by kowalski

¿How is it going so far? I also did install ft86 UEL catted headers. I ran stage 2 v3 tune (91 octane - Shiv told me it would be ok as this tune was almost as aggressive as stg 1 93 octane). But it did not felt right. Vibration issues, slow reprise at low rpms...whereas stage 1 (93 octane) with the same catted headers felt more stable and had more omph at that torque dip.

One thing I noticed, though, is that it gets harder to reach high end speeds with stg 1. Even stock with no aftermarket header the car coul'd reach 230 km/h more easily. So I am very curious to know your experience. ¿Have you stayed with stage 2? ¿Have you got any issues?

Hopefully final OFP beta tests will come to an end and we will be able to enjoy the new tunes

best,

I've been running the 91 tune specifically for the FT86speed factory catted header since May. It does feel a bit less aggressive than the old stage 2 93 tune but I get less FLKC on this one since it is for 91 octane. (The only gas I have ever used in my car is Shell 93 even on the 91 tunes so fuel has been consistent as well). When I was back on the stage 1 tune before headers or anything I used to have alot of problems with the car stuttering but after I did the dealer transmission fix that went away and hasn't come back.

On the old stage 2 i would get FLKC from -.6 to -1 while driving on the highway at 75-80 mph. I either have no FLKC on this tune or occasional -.3 that usually goes away as soon as I barely move the throttle.

Cant comment on the 230 kmh, closest I've ever had my car was 125 mph but that was almost 2 years ago when I was on the Stage 2 E85 tune.

[Tectoniic]

Originally Posted by G-awesome

anyone wanna send me the v3 catted stage 2 tune? I'm getting tired of waiting for the official release...

I have the AT one for CAL ID D00D if yours is a 2015 AT.

[G-awesome]

Yes sir! That's the one. I should've been a tad more specific...PM me this bad boy and thanks a bunch!

[kowalski]

Originally Posted by Tectoniic

I've been running the 91 tune specifically for the FT86speed factory catted header since May.(...)On the old stage 2 i would get FLKC from -.6 to -1 while driving on the highway at 75-80 mph. I either have no FLKC on this tune or occasional -.3 that usually goes away as soon as I barely move the throttle.

Thanks for commenting on this man. Last time I checked for knock I did not see any thing that could rise any flags. But I remember that on my first runs, between 70 - 75 mph aprox the engine felt weird (more vibration, loud noise -hard to tell if knocking). If I gave it more gas, then it settled. But I was not at ease with that. So I guess that's why I sticked to stage 1 (93 oct). I also re-torqued all my headers bolts. Perhaps I'll give it another try and start logging. It just freaks me out when the engine starts making weird noises. At first I thought it might be some sort of leak, but it wasn't.

[Bugguy73]

Originally Posted by Shiv@Openflash

Yes, we have a tune specific for a FT86 Speedfactory catted header. As reviewed here:

I just got this header with oft stage 1 and would love this tune. Is it much better?

[John27]

I am running normal map stage 2 93oct uel header I have no problem with it mine is AT CAL ID D00D 2015