FA20CLUB Turbo Kit Results Are In...60 Trim Impressive - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

FA20Club.com · 04-14-2013, 02:55 PM

5.3PSI= 286HP 212TQ On the STOCK Exhaust

Finally free'd up some time in the schedule to get afew pull in on the kit we installed last week. promising baseline. Thing about dropping the wastegate spring lower and adding boost solenoid to ramp the boost in. Current methos was timing based control I applied to allow the car to hook up a bit better on the street and then apply the adv later in the rpm once its rolling to keep here screaming. this was with the Garrett 60 trim which still spools remarkable well. soon to be So for all those who think the t3/t4 wont spool quick enough think again. With any of the smaller turbo option i can easily see much lower spool times in comparison to the 60 trim which is almost instantaneous on the street considering your are always pretty much somewhere in the 3500-400 rpm range when driving around. When you hammer this thing it takes off right away no excessive power delay. Which works well for those looking for a kit that performance well on a street car without breaking the 4K budget.

Wont be doing any additional testing for a couple weeks we have a few of these already on order so its back to the fab table for us.

mashal · 04-14-2013, 02:56 PM

Ooooooooohhhhhhh

Frs300 · 04-14-2013, 03:04 PM

looks good. nice numbers on 5.3 psi

FA20Club.com · 04-14-2013, 03:06 PM

Quote:

Originally Posted by Frs300

looks good. nice numbers on 5.3 psi

got some goodies for you coming in tuesday. im gonna start a build thread for you setup too

lexusb3 · 04-14-2013, 03:08 PM

This kit is truley a work of art i couldnt ask for better results!!!This car is a animal on the streets.. @FA20Club.com thanks again for all the help and puting this kit together best investment so far!!!

Sportsguy83 · 04-14-2013, 03:24 PM

Very clean and simple pipe routing.

Frs300 · 04-14-2013, 03:28 PM

Quote:

Originally Posted by FA20Club.com

got some goodies for you coming in tuesday. im gonna start a build thread for you setup too

i cant wait to see this build thread...i have a stack of goodies at the house here as well. brakes,hood,trd canards, short shifter,shark fin, and eibach Pro-Plus kit(springs and sway bars)

lexusb3 · 04-14-2013, 03:53 PM

Quote:

Originally Posted by Frs300

i cant wait to see this build thread...i have a stack of goodies at the house here as well. brakes,hood,trd canards, short shifter,shark fin, and eibach Pro-Plus kit(springs and sway bars)

your putting too much pressure on me with all these goodies i need to step it up lol...

FA20Club.com · 04-14-2013, 03:53 PM

ship them down ill have the guys install them for you.

Frs300 · 04-14-2013, 04:11 PM

Quote:

Originally Posted by FA20Club.com

ship them down ill have the guys install them for you.

210lbs of parts lol

FA20Club.com · 04-14-2013, 04:13 PM

lol ill see if i can arrange some cheap transport for it. its not a long distance just allota weight

Frs300 · 04-14-2013, 04:14 PM

its all good give me something to do in the garage

JoeBoxer · 04-14-2013, 04:19 PM

Very nice numbers for such low psi, great work as always.

lbroskee · 04-14-2013, 04:29 PM

Looks amazing. Any idea how to squeeze some extra Torque? I think the AVO kit is around 280 hp and ~245 tq, but ur cheaper, master tuner, local, and can install for a decent peice from what lexusb3 told me, plus i already keep shoppin from you anyway

04-14-2013, 02:55 PM	#1
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s) Tagged: 2 Thread(s)	FA20CLUB Turbo Kit Results Are In...60 Trim Impressive 5.3PSI= 286HP 212TQ On the STOCK Exhaust Finally free'd up some time in the schedule to get afew pull in on the kit we installed last week. promising baseline. Thing about dropping the wastegate spring lower and adding boost solenoid to ramp the boost in. Current methos was timing based control I applied to allow the car to hook up a bit better on the street and then apply the adv later in the rpm once its rolling to keep here screaming. this was with the Garrett 60 trim which still spools remarkable well. soon to be So for all those who think the t3/t4 wont spool quick enough think again. With any of the smaller turbo option i can easily see much lower spool times in comparison to the 60 trim which is almost instantaneous on the street considering your are always pretty much somewhere in the 3500-400 rpm range when driving around. When you hammer this thing it takes off right away no excessive power delay. Which works well for those looking for a kit that performance well on a street car without breaking the 4K budget. Wont be doing any additional testing for a couple weeks we have a few of these already on order so its back to the fab table for us. Last edited by FA20Club.com; 07-26-2013 at 09:06 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fa20Club.com Turbo Kit FASTEST IN FLORIDA	lexusb3	Forced Induction	864	02-22-2014 10:00 AM
Visconti vs FA20Club vs Stock Tune Dyno Results	mechaghost	Engine, Exhaust, Transmission	153	07-08-2013 11:35 AM
FA20CLUB V2 Turbo Kit Progress	FA20Club.com	Forced Induction	40	05-17-2013 01:26 PM
JFlogerzi's FA20Club 91 and E85 Tune Results and Impressions	jflogerzi	Engine, Exhaust, Transmission	16	03-24-2013 01:09 AM
FA20CLUB.com Stage 1 ECUTEK Reflash Results	FA20Club.com	Engine, Exhaust, Transmission	20	08-25-2012 07:02 PM

04-14-2013, 02:56 PM	#2
mashal DADA Join Date: Jun 2012 Drives: 2013 Location: Kanada Posts: 1,500 Thanks: 47 Thanked 388 Times in 249 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	Ooooooooohhhhhhh

04-14-2013, 03:04 PM	#3
Frs300 Senior Member Join Date: Oct 2012 Drives: Pile of junk Location: florida Posts: 1,190 Thanks: 264 Thanked 968 Times in 413 Posts Mentioned: 232 Post(s) Tagged: 1 Thread(s)	looks good. nice numbers on 5.3 psi

04-14-2013, 03:08 PM	#5
lexusb3 Banned Join Date: Feb 2013 Drives: FRS Location: florida Posts: 1,478 Thanks: 736 Thanked 570 Times in 434 Posts Mentioned: 110 Post(s) Tagged: 1 Thread(s)	This kit is truley a work of art i couldnt ask for better results!!!This car is a animal on the streets.. @FA20Club.com thanks again for all the help and puting this kit together best investment so far!!!

04-14-2013, 03:53 PM	#9
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s) Tagged: 2 Thread(s)	ship them down ill have the guys install them for you.

04-14-2013, 04:13 PM	#11
FA20Club.com Banned Join Date: Aug 2012 Drives: 2013 White Out FR-S Location: Florida Posts: 1,335 Thanks: 24 Thanked 1,162 Times in 501 Posts Mentioned: 323 Post(s) Tagged: 2 Thread(s)	lol ill see if i can arrange some cheap transport for it. its not a long distance just allota weight

04-14-2013, 04:14 PM	#12
Frs300 Senior Member Join Date: Oct 2012 Drives: Pile of junk Location: florida Posts: 1,190 Thanks: 264 Thanked 968 Times in 413 Posts Mentioned: 232 Post(s) Tagged: 1 Thread(s)	its all good give me something to do in the garage

04-14-2013, 04:19 PM	#13
JoeBoxer Senior Member Join Date: Jul 2012 Drives: Whiteout FR-S Location: Arkansas Posts: 4,154 Thanks: 1,666 Thanked 1,627 Times in 997 Posts Mentioned: 72 Post(s) Tagged: 0 Thread(s)	Very nice numbers for such low psi, great work as always.

User Name		Remember Me?
Password