Jackson Racing NA Oil Cooler

[jmai]

So I ended buying a used JR NA oil cooler and was wondering if there was suppose to be any included hardware that mounts the bracket to the bumper or does it just reuse the oem bolts on the bumper.

[CSG Mike]

It mounts onto your impact beam.

[Joon525]

He's asking if the NA oil cooler is supposed to come with hardware....
@jmai this is a link to the installation manual.
https://jacksonracing.com/pdf/instru...anual_rev2.pdf
The bottom of page 2 states

Part Numbers will be listed throughout the installation instructions in parentheses.
(1234-56-789) or (12345-67890)

An example is in the middle of page 8.

22. On the driver side of the front bumper support you will find an open mounting hole with no
threads that is approximately 23” from the stud mounting location. Reach in through the opening
in the front bumper support and install a M6x1.0x25mm flanged bolt (91100-06025) with a M6
fender washer down through this mounting hole

So yes, I would assume this unit came with hardware.

[jmai]

Originally Posted by CSG Mike

It mounts onto your impact beam.

Sorry I meant the hardware to mount onto the impact beam. Doesn’t seem like the person I bought it from had hardware to mount it or does it uses bolts that already exist on the impact beam

[jmai]

Originally Posted by Joon525

He's asking if the NA oil cooler is supposed to come with hardware....
@jmai this is a link to the installation manual.
https://jacksonracing.com/pdf/instru...anual_rev2.pdf
The bottom of page 2 states


An example is in the middle of page 8.


So yes, I would assume this unit came with hardware.

That’s what I was curious about, but doesn’t seem like it shows any hardware on the website images

[Joon525]

Originally Posted by jmai

That’s what I was curious about, but doesn’t seem like it shows any hardware on the website images

Even though the pictures don't show hardware it doesn't mean it's not required. No one should expect the core to mount itself by means of magic. The pictures are just for marketing purposes. So...

• Read the manual I linked you to and buy the same hardware at a local store.
• Contact Jackson Racing and see if you can buy the hardware from them.
• Contact the guy you bought it from and ask if they have the hardware.

[CSG Mike]

Originally Posted by jmai

Sorry I meant the hardware to mount onto the impact beam. Doesn’t seem like the person I bought it from had hardware to mount it or does it uses bolts that already exist on the impact beam

Used items are rarely complete. You'll need to source replacement hardware. If the uninstall was incomplete, then I would recommend carefully inspecting the rest of your used oil cooler.