monogram headlight install help needed

[leveeyang]

Is there any chance you can take a picture of your hardness wiring? I'm doing mines this weekend.

[fibber1200]

Originally Posted by iLuveKetchup

I've just swapped out my base headlights for the Monogram/RS lights. Most of the steps you see online are for the JDM headlights which are 8-pin connectors with 7 active leads (pins). The US RS lights are also 8-pin connector but with 6 active leads.

To answer your question, you will re-use (or buy new from Toyota/Subaru) the 6-pin connector from your base headlights.

This is the pin-out for the 6-pin connector that you will re-pin to your RS headlights...

---- TAB ----
| 3 | 2 | 1 |
------------------
| 6 | 5 | 4 |

1 = yellow - high beam +
2 = black (thicc) - headlight gnd
3 = red (thicc) - headlight +
4 = blue - high beam gnd
5 = black - led gnd
6 = white - led +

Alternatively, you can tap the DRL from the resistor (steps found on the JDM headlight install).

So if I connect the pin6 to monogram headlight white led+ is that mean the led will be on all the time? What if I tap the drl from the resistor(I guess you mean the green wire) where is the green wire should connecting to? And connecting the green wires mean disconnect the pin6 just get the power from resistor? Is that right?

[iLuveKetchup]

Originally Posted by fibber1200

So if I connect the pin6 to monogram headlight white led+ is that mean the led will be on all the time? What if I tap the drl from the resistor(I guess you mean the green wire) where is the green wire should connecting to? And connecting the green wires mean disconnect the pin6 just get the power from resistor? Is that right?

I honestly don't remember. I forgot I wrote all that crap. I'll have to take a photo of the connector.

[fibber1200]

Originally Posted by iLuveKetchup

I honestly don't remember. I forgot I wrote all that crap. I'll have to take a photo of the connector.

This is my current wire with the pin 5 and 6 empty on the car connector
And pin1 and4 empty on the headlight connector