Anyone tried a Fidanza Clutch and flywheel set - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

JesseE · 12-19-2014, 01:40 PM

I'm curious to see if anyone has tried this clutch setup before, its

2013 SCION FR S Fidanza Qwik-Rev Clutch Combos 710102
Here is the link
http://www.summitracing.com/parts/fi...ion/model/fr-s

I can get this shipped for a good deal with our wholesale summit dealer account, but I'm hoping someone has tried it and has some opinions on it.

20k overall miles with the last 10k boosted and now with e85 for 1k miles my clutch is slipping.

The V2 clutch set with lwfw has 6 puck disc which is what I am hoping someone has tried before.

JesseE · 12-22-2014, 01:12 PM

Looks like I might be the first :-P

EAGLE5 · 12-22-2014, 01:24 PM

[ame="https://www.youtube.com/watch?v=Fp4oAsoHyPo"]Fidanza Flywheel Sucks! - YouTube[/ame]

Good luck.

JesseE · 12-22-2014, 02:32 PM

Is that a frs?

I dunno, I have had multiple fidanza flywheels and never had any issues. even on 2 of my other subarus. Oh well we shall see

kster1 · 12-22-2014, 05:28 PM

I'm running a Fidanzda flywheel with the OEM clutch. No issues so far.

GH05T · 12-24-2014, 10:53 AM

Let me know how it is. Def planning on getting a clutch soon and this is interesting to see.

GH05T · 12-24-2014, 10:55 AM

Quote:

Originally Posted by jsimon7777

Good luck.

This is dated from 2008 so it's def not an FRS

JesseE · 01-15-2015, 03:44 AM

Well I got the flywheel and clutch finally.......... Not to happy yet, I'm waiting on Fidanza to get back to me in the morning so we can figure out why the flywheel they sent me is was not made correctly.

Needless to say, the FRS/BRZ transmission is by far the easiest transmission to remove and install... Less than 45 minutes to get it out, and not much more than that to complete the entire job. what a cake walk in terms of clutch jobs, lol.

kster1 · 01-15-2015, 09:58 AM

Quote:

Originally Posted by JesseE

Well I got the flywheel and clutch finally.......... Not to happy yet, I'm waiting on Fidanza to get back to me in the morning so we can figure out why the flywheel they sent me is was not made correctly.

Needless to say, the FRS/BRZ transmission is by far the easiest transmission to remove and install... Less than 45 minutes to get it out, and not much more than that to complete the entire job. what a cake walk in terms of clutch jobs, lol.

What's the problem with the flywheel? Was there a manufacturing defect?

JesseE · 01-15-2015, 12:31 PM

Well between the flywheel and the crankshaft there is what Subaru calls a crankshaft sensor plate. it has the signal for crankshaft position built into the design of the plate so that every time a specific part of the sensor plate goes over the magnet on the crankshaft sensor it picks the position up and sends it to the computer. The fidanza flywheel they sent me even though it has the correct part number stamped into it seems to be not cnc'd correctly, and it is actually recessed into the flywheel instead of coming out like the factory oem flywheel. What happened is it doesn't fit in the fidanza flywheel correctly and pushed out the crankshaft sensor plate all the way to the point of rubbing against the crankshaft sensor, and broke the crankshaft sensor.

So now I have a broken crankshaft position sensor, a bent crankshaft sensor plate (I had to special order and next day air it so I can have it by tomorrow from Subaru. (btw if you ever have this problem don't order from Toyota they are more expensive and do not allow next day air options) which has costed me an extra 160$.

I sure hope Fidanza pulls through and next day airs me a new clutch/flywheel set that is built right and pays for the sensor and sensor plate. I sent them pictures of everything this morning and they will confirm what I already know happened and then it is up to them to make it right. So far they have been very helpful I hope that continues and they get back to me quickly. The car is sitting on a rack taking up shop space at my shop and that's not good for business when 1 out of our 4 racks are down for 2+ days.

I'll let you guys know what I hear back from Fidanza

EAGLE5 · 01-15-2015, 01:35 PM

This sucks.

JesseE · 01-15-2015, 06:17 PM

So Fidanza called back and they are making a new flywheel/clutch kit for me and sending me out a whole new kit! Also they said they will take care of the cost of the crankshaft sensor and sensor plate.

Kudos to them, been so easy to deal with!

It's very strange they have never had this happen before with the other kits they have sold to frs/brz people, Hopefully just a once-off kind of a problem.

Xero-Limit · 01-15-2015, 07:35 PM

Quote:

Originally Posted by JesseE

So Fidanza called back and they are making a new flywheel/clutch kit for me and sending me out a whole new kit! Also they said they will take care of the cost of the crankshaft sensor and sensor plate.

Kudos to them, been so easy to deal with!

It's very strange they have never had this happen before with the other kits they have sold to frs/brz people, Hopefully just a once-off kind of a problem.

Good of them to do that. Have used their flywheels for 15+ years and never an issue, but it can happen to anyone.

Weasel Soup · 01-15-2016, 11:24 PM

Any updates on how this has worked for you?

12-19-2014, 01:40 PM	#1
JesseE Senior Member Join Date: Oct 2012 Drives: LS Swapped BRZ Location: Phoenix, AZ Posts: 419 Thanks: 65 Thanked 173 Times in 90 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Anyone tried a Fidanza Clutch and flywheel set I'm curious to see if anyone has tried this clutch setup before, its 2013 SCION FR S Fidanza Qwik-Rev Clutch Combos 710102 Here is the link http://www.summitracing.com/parts/fi...ion/model/fr-s I can get this shipped for a good deal with our wholesale summit dealer account, but I'm hoping someone has tried it and has some opinions on it. 20k overall miles with the last 10k boosted and now with e85 for 1k miles my clutch is slipping. The V2 clutch set with lwfw has 6 puck disc which is what I am hoping someone has tried before.

12-24-2014, 10:53 AM	#6
GH05T Undercover Batman Join Date: Jan 2013 Drives: 2013 Subaru BRZ Limited Location: Jersey City, NJ Posts: 567 Thanks: 120 Thanked 219 Times in 128 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	Let me know how it is. Def planning on getting a clutch soon and this is interesting to see. __________________ *"He who shall be last, shall be sideways and smiling." - Jeremy Clarkson*

01-15-2016, 11:24 PM	#14
Weasel Soup Veteran RallyCrosser Join Date: Apr 2014 Drives: 10 Series FR-S, 95 Escort Rally Car Location: Colorado Posts: 202 Thanks: 82 Thanked 92 Times in 46 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Any updates on how this has worked for you? __________________ Everything should be attempted twice. Once to satisfy curiosity, and the second time to see if you like it. My Journal 2016 SCCA RallyCross National Champion - Prepared Rear Wheel Drive

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fidanza Qwik-Rev V2 Clutch	BRZFern	Engine, Exhaust, Transmission	5	11-03-2014 07:15 PM
Fidanza Qwik Rev Clutch & Flywheel kit	MAPerformance	Transmission and Driveline	10	01-03-2014 11:03 AM
Special Deals on Clutch Masters Clutch & Flywheel Combo!	KronosPerformance	Transmission and Driveline	15	08-25-2012 01:22 PM
Clutch Masters Clutch and Flywheel Kits for FR-S and BRZ available at Redline360	Redline360	Transmission and Driveline	2	07-30-2012 11:01 AM

12-22-2014, 01:12 PM	#2
JesseE Senior Member Join Date: Oct 2012 Drives: LS Swapped BRZ Location: Phoenix, AZ Posts: 419 Thanks: 65 Thanked 173 Times in 90 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Looks like I might be the first :-P

12-22-2014, 02:32 PM	#4
JesseE Senior Member Join Date: Oct 2012 Drives: LS Swapped BRZ Location: Phoenix, AZ Posts: 419 Thanks: 65 Thanked 173 Times in 90 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Is that a frs? I dunno, I have had multiple fidanza flywheels and never had any issues. even on 2 of my other subarus. Oh well we shall see

12-22-2014, 05:28 PM	#5
kster1 Senior Member Join Date: Dec 2012 Drives: 2013 BRZ Location: Fremont, CA Posts: 316 Thanks: 229 Thanked 212 Times in 121 Posts Mentioned: 16 Post(s) Tagged: 1 Thread(s)	I'm running a Fidanzda flywheel with the OEM clutch. No issues so far.

01-15-2015, 03:44 AM	#8
JesseE Senior Member Join Date: Oct 2012 Drives: LS Swapped BRZ Location: Phoenix, AZ Posts: 419 Thanks: 65 Thanked 173 Times in 90 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Well I got the flywheel and clutch finally.......... Not to happy yet, I'm waiting on Fidanza to get back to me in the morning so we can figure out why the flywheel they sent me is was not made correctly. Needless to say, the FRS/BRZ transmission is by far the easiest transmission to remove and install... Less than 45 minutes to get it out, and not much more than that to complete the entire job. what a cake walk in terms of clutch jobs, lol.

01-15-2015, 12:31 PM	#10
JesseE Senior Member Join Date: Oct 2012 Drives: LS Swapped BRZ Location: Phoenix, AZ Posts: 419 Thanks: 65 Thanked 173 Times in 90 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	Well between the flywheel and the crankshaft there is what Subaru calls a crankshaft sensor plate. it has the signal for crankshaft position built into the design of the plate so that every time a specific part of the sensor plate goes over the magnet on the crankshaft sensor it picks the position up and sends it to the computer. The fidanza flywheel they sent me even though it has the correct part number stamped into it seems to be not cnc'd correctly, and it is actually recessed into the flywheel instead of coming out like the factory oem flywheel. What happened is it doesn't fit in the fidanza flywheel correctly and pushed out the crankshaft sensor plate all the way to the point of rubbing against the crankshaft sensor, and broke the crankshaft sensor. So now I have a broken crankshaft position sensor, a bent crankshaft sensor plate (I had to special order and next day air it so I can have it by tomorrow from Subaru. (btw if you ever have this problem don't order from Toyota they are more expensive and do not allow next day air options) which has costed me an extra 160$. I sure hope Fidanza pulls through and next day airs me a new clutch/flywheel set that is built right and pays for the sensor and sensor plate. I sent them pictures of everything this morning and they will confirm what I already know happened and then it is up to them to make it right. So far they have been very helpful I hope that continues and they get back to me quickly. The car is sitting on a rack taking up shop space at my shop and that's not good for business when 1 out of our 4 racks are down for 2+ days. I'll let you guys know what I hear back from Fidanza

01-15-2015, 06:17 PM	#12
JesseE Senior Member Join Date: Oct 2012 Drives: LS Swapped BRZ Location: Phoenix, AZ Posts: 419 Thanks: 65 Thanked 173 Times in 90 Posts Mentioned: 30 Post(s) Tagged: 0 Thread(s)	So Fidanza called back and they are making a new flywheel/clutch kit for me and sending me out a whole new kit! Also they said they will take care of the cost of the crankshaft sensor and sensor plate. Kudos to them, been so easy to deal with! It's very strange they have never had this happen before with the other kits they have sold to frs/brz people, Hopefully just a once-off kind of a problem.

User Name		Remember Me?
Password