Question about Nameless Performance exhaust - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Metallic BRZ · 08-05-2012, 10:48 AM

I'm looking to get an exhaust from Nameless but I'm not sure what to get so am looking for a bit of advice.*

*It is between the [BRZ-2-5-street-axleback-and-high-flow-cat-package] and the *[BRZ 2.5" Street Axleback and High Flow Cat Package (Replaces Overpipe)].*

The latter is about 80 bucks more but both specify the same gains. Is it worth it to replace the overripe too? I may end up getting their header too when it becomes available - would that make a difference? *Should I hold off on replacing the overripe until I get the header? Sounds like the overripe install requires jacking up the engine.

Thanks in advance - - I asked on heir website too but there aren't any reviews there, but this site has lots of opinions.*

dabocx · 08-05-2012, 11:05 AM

It wasnt too much harder to install and i only needed to jack up the engine a small amount. I wasnt really sure if it was worth it but once i had the stock overpipe in my hands i was happy i got the nameless overpipe.

Stock overpipe=trash

Metallic BRZ · 08-05-2012, 11:20 AM

Quote:

Originally Posted by dabocx

It wasnt too much harder to install and i only needed to jack up the engine a small amount. I wasnt really sure if it was worth it but once i had the stock overpipe in my hands i was happy i got the nameless overpipe.

Stock overpipe=trash

Did you get the resonator too?

tonystewart · 08-05-2012, 11:38 AM

Quote:

Originally Posted by Metallic BRZ

Did you get the resonator too?

Great question!

dabocx · 08-05-2012, 11:58 AM

Quote:

Originally Posted by Metallic BRZ

Did you get the resonator too?

My one regret not getting it with that, mine just has the hi flow cat.

Even if i doesnt make power im hoping nameless with make me a midpipe with a more aggressive resonator.

Metallic BRZ · 08-05-2012, 01:05 PM

Quote:

Originally Posted by dabocx

My one regret not getting it with that, mine just has the hi flow cat.

Even if i doesnt make power im hoping nameless with make me a midpipe with a more aggressive resonator.

Why so? Do you find that there is too much drone without it?

Tainen · 08-05-2012, 01:22 PM

I found pretty much no drone with the downpipe/axleback setup. But- headers make the car drone.

so I feel that the resonator is needed for that route, unless you don't care about volume.

Metallic BRZ · 08-05-2012, 01:31 PM

Quote:

Originally Posted by Tainen

I found pretty much no drone with the downpipe/axleback setup. But- headers make the car drone.

so I feel that the resonator is needed for that route, unless you don't care about volume.

How do you add the resonator to the order? I got as far as shipping details but didn't see the option to add the resonator.

Tainen · 08-05-2012, 01:53 PM

Just drop it in the notes section of your order.

Metallic BRZ · 08-05-2012, 02:01 PM

Quote:

Originally Posted by Tainen

Just drop it in the notes section of your order.

What is the cost? If I put it in he notes how does the total get updated? I guess I need to just see what happens. It would be nice if there was an option to add.

Thanks

Sportsguy83 · 08-05-2012, 02:14 PM

@Jason@Nameless can chime in on this... I would be interested too in the resonator, but would also like to see video with sound and it installed. Or at least confirmation of how it changes the sound of the already posted videos.

I am actually ready to buy the exhaust too.

Sportsguy83 · 08-05-2012, 02:16 PM

Quote:

Originally Posted by Metallic BRZ

I'm looking to get an exhaust from Nameless but I'm not sure what to get so am looking for a bit of advice.*

*It is between the [BRZ-2-5-street-axleback-and-high-flow-cat-package] and the *[BRZ 2.5" Street Axleback and High Flow Cat Package (Replaces Overpipe)].*

The latter is about 80 bucks more but both specify the same gains. Is it worth it to replace the overripe too? I may end up getting their header too when it becomes available - would that make a difference? *Should I hold off on replacing the overripe until I get the header? Sounds like the overripe install requires jacking up the engine.

I am also curious about this, what is the difference if any in sound and performance between the two options.

dabocx · 08-05-2012, 03:41 PM

Quote:

Originally Posted by Metallic BRZ

Why so? Do you find that there is too much drone without it?

Im getting the header.

Call and tell them, i put it in my notes for the resonator but they forgot to include it.

Metallic BRZ · 08-05-2012, 07:09 PM

Quote:

Originally Posted by dabocx

Im getting the header.

Call and tell them, i put it in my notes for the resonator but they forgot to include it.

That is what I'm worried about. I want to make sure it is specified in the order.

08-05-2012, 10:48 AM	#1
Metallic BRZ Member Join Date: Apr 2012 Drives: 1992 Corvette Z07 Location: Wisconsin Posts: 77 Thanks: 13 Thanked 12 Times in 7 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Question about Nameless Performance exhaust I'm looking to get an exhaust from Nameless but I'm not sure what to get so am looking for a bit of advice.* It is between the [BRZ-2-5-street-axleback-and-high-flow-cat-package] and the [BRZ 2.5" Street Axleback and High Flow Cat Package (Replaces Overpipe)].* The latter is about 80 bucks more but both specify the same gains. Is it worth it to replace the overripe too? I may end up getting their header too when it becomes available - would that make a difference? Should I hold off on replacing the overripe until I get the header? Sounds like the overripe install requires jacking up the engine. Thanks in advance - - I asked on heir website too but there aren't any reviews there, but this site has lots of opinions. __________________ 1992 Z07 Corvette 2008 Odyssey 2013 BRZ

08-05-2012, 01:22 PM	#7
Tainen Senior Member Join Date: Nov 2011 Drives: First SWP BRZ-L Location: Washington Posts: 809 Thanks: 154 Thanked 350 Times in 174 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	I found pretty much no drone with the downpipe/axleback setup. But- headers make the car drone. so I feel that the resonator is needed for that route, unless you don't care about volume. __________________ First white BRZ in the country Limited SWP BRZ, 35% tint, clear bra, Nameless Performance downpipe, axelback, headers

08-05-2012, 01:53 PM	#9
Tainen Senior Member Join Date: Nov 2011 Drives: First SWP BRZ-L Location: Washington Posts: 809 Thanks: 154 Thanked 350 Times in 174 Posts Mentioned: 11 Post(s) Tagged: 0 Thread(s)	Just drop it in the notes section of your order. __________________ First white BRZ in the country Limited SWP BRZ, 35% tint, clear bra, Nameless Performance downpipe, axelback, headers

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nameless Performance BRZ Axleback Exhaust	ESBjiujitsu	Engine, Exhaust, Transmission	1377	04-21-2020 02:23 AM
Nameless Performance Exhaust Group Buy	jwuwu	Southern California	56	10-28-2012 10:11 PM
Nameless Performance Exhaust Group Buy	jwuwu	BRZ First-Gen (2012+) -- General Topics	1	07-24-2012 02:12 AM
We are Nameless Performance.	John@Nameless	Announcements, Contests, Giveaways	22	06-18-2012 11:32 PM
Nameless Performance is here.	Nameless Performance Inc.	Engine, Exhaust, Bolt-Ons	16	06-06-2012 04:32 AM

08-05-2012, 11:05 AM	#2
dabocx Senior Member Join Date: Jan 2012 Drives: Scion FRS Location: United States Posts: 1,267 Thanks: 564 Thanked 261 Times in 191 Posts Mentioned: 9 Post(s) Tagged: 0 Thread(s)	It wasnt too much harder to install and i only needed to jack up the engine a small amount. I wasnt really sure if it was worth it but once i had the stock overpipe in my hands i was happy i got the nameless overpipe. Stock overpipe=trash

User Name		Remember Me?
Password