Show off your interior! - Page 47 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Blessed_frs · 02-28-2020, 12:29 AM

Don't know if any of you actually want to remove the red stitching all together but it is possible everywhere but the steering wheel. I did it and made a short vid talking about it one before and one after. Hope this helps anyone

Suparu · 02-29-2020, 07:41 PM

I just finished upgrading my interior. It’s a 2013 BRZ so it had silver trim and no padding.

I replaced all the silver trim with JDM black and got all the OEM black leather + red stitching bits... well I still need to do the gauge hood and armrest actually.

I found the OEM wet carbon fiber climate controls and window switches off eBay. They came off a 2018 tS that was total’ed at low mileage. The buttons and dials feel brand new like they’ve never been used. It was all plug-and-play since I had the dual climate control already.

I installed everything but the door stuff a month ago, then finished the door stuff earlier today.

Some of the trim looks silver in the pics but that’s just how the pic came out cuz of the sun, it’s all that JDM soft black that a lot of other in previous pages of this thread also did.

I’m excited, it looks a million times better than it did!

Update: since Coronavirus had me no longer doing the daily commute, I took out the seat belts and had Safety Restore replace the webbing to red.

SuperTom · 03-02-2020, 08:30 AM

Quote:

Originally Posted by Blessed_frs

Don't know if any of you actually want to remove the red stitching all together but it is possible everywhere but the steering wheel. I did it and made a short vid talking about it one before and one after. Hope this helps anyone

After de-stitching is it possible to get in from behind and re-stitch another color.

norcalpb · 04-21-2020, 03:53 PM

Anyone know a good way to remove the stains from my driver seat?

tehShirt · 04-21-2020, 06:28 PM

Quote:

Originally Posted by SuperTom

After de-stitching is it possible to get in from behind and re-stitch another color.

You can remove the material and stitch in a new color. I've removed all the red stitching and replaced it with black, minus the seats. They are being replaced with leather in the future.

kevaughan · 05-05-2020, 02:07 PM

Quote:

Originally Posted by norcalpb

Anyone know a good way to remove the stains from my driver seat?

Have you tried a Bissell Little Green Machine?

VACapsFan · 05-06-2020, 12:22 PM

Quote:

Originally Posted by Suparu

Update: since Coronavirus had me no longer doing the daily commute, I took out the seat belts and had Safety Restore replace the webbing to red.

I was thinking about going the Safety Restore route as well, which red did you end up picking?

Suparu · 05-06-2020, 03:05 PM

Quote:

Originally Posted by VACapsFan

I was thinking about going the Safety Restore route as well, which red did you end up picking?

Ferrari Red

Busybee · 05-06-2020, 09:47 PM

Quote:

Originally Posted by VACapsFan

I was thinking about going the Safety Restore route as well, which red did you end up picking?

Looks great!

Was it easy to take out and re install? Any airbag or battery precautions that is needed?

Thanks

Sent from my iPhone using Tapatalk

Slade · 05-07-2020, 03:54 PM

Quote:

Originally Posted by Kestrel

I did the full JDM black trim swap recently. Other notable pieces include a Sparco Evo II US seat, Perrin shift knob and drift knob and the InFocus Retro Lazer shift boot/ebrake boot set.

Sent from my SM-G975U using Tapatalk

Did not know their were other shift knob options for the A/T. Would you mind sharing a link? Looks great

Kestrel · 05-09-2020, 09:48 AM

Quote:

Originally Posted by Slade

Did not know their were other shift knob options for the A/T. Would you mind sharing a link? Looks great

I think they're discontinued but I believe I found this one on Rallysportdirect.

Sent from my SM-G975U using Tapatalk

Oxyg3n · 05-26-2020, 04:26 AM

A new steering wheel has to be one of the best upgrades to the interior.
Also have my aftermarket Sony headunit here which turned out to be one of the most difficult modifications I have done only because I know nothing about wiring.

Blessed_frs · 07-13-2020, 10:38 PM

Quote:

Originally Posted by SuperTom

After de-stitching is it possible to get in from behind and re-stitch another color.

Sorry I haven't been on here in awhile, most places the stuff was glued on to the back, so if you were careful, yes. But you'd have to do it from the front.

Mr_Eyo · 07-14-2020, 02:40 AM

Quote:

Originally Posted by Slade

Did not know their were other shift knob options for the A/T. Would you mind sharing a link? Looks great

Raceseng makes an adapter for the AT shifter to use any of their knobs.

I glued an 86 emblem from emblems only.com.

02-29-2020, 07:41 PM	#646
Suparu Senior Member Join Date: May 2015 Drives: 2013 BRZ Limited Location: Atlanta, GA Posts: 123 Thanks: 115 Thanked 48 Times in 32 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I just finished upgrading my interior. It’s a 2013 BRZ so it had silver trim and no padding. I replaced all the silver trim with JDM black and got all the OEM black leather + red stitching bits... well I still need to do the gauge hood and armrest actually. I found the OEM wet carbon fiber climate controls and window switches off eBay. They came off a 2018 tS that was total’ed at low mileage. The buttons and dials feel brand new like they’ve never been used. It was all plug-and-play since I had the dual climate control already. I installed everything but the door stuff a month ago, then finished the door stuff earlier today. Some of the trim looks silver in the pics but that’s just how the pic came out cuz of the sun, it’s all that JDM soft black that a lot of other in previous pages of this thread also did. I’m excited, it looks a million times better than it did! Update: since Coronavirus had me no longer doing the daily commute, I took out the seat belts and had Safety Restore replace the webbing to red. __________________ Suparu's BRZ build thread Last edited by Suparu; 04-11-2020 at 05:35 PM.

05-26-2020, 04:26 AM	#656
Oxyg3n Senior Member Join Date: Oct 2015 Drives: 2017 BRZ - WRB Location: Bay Area Posts: 316 Thanks: 115 Thanked 208 Times in 108 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	A new steering wheel has to be one of the best upgrades to the interior. Also have my aftermarket Sony headunit here which turned out to be one of the most difficult modifications I have done only because I know nothing about wiring. Last edited by Oxyg3n; 05-26-2020 at 06:22 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DCW Carbon Fiber interior items! Center console Plaques / Interior panels	doggy	Interior Parts (Incl. Lighting)	143	10-11-2013 12:17 PM
LED interior conversion kits (interior), USA stock & warranty	WTF	Interior Parts (Incl. Lighting)	0	05-22-2013 11:17 PM
Honda to show off EV plug in concepts at Tokyo Auto Show	Dark	Other Vehicles & General Automotive Discussions	4	11-10-2011 09:34 PM
Subaru to Show BRZ Concept w/ Body at L.A. Show; More Details Emerge on BRZ and FR-S	Hachiroku	BRZ First-Gen (2012+) -- General Topics	77	09-27-2011 11:15 PM
FT-86 doesn't show at 2010 New York Auto Show	Midship Runabout	Scion FR-S / Toyota 86 GT86 General Forum	30	04-02-2010 06:17 PM

04-21-2020, 03:53 PM	#648
norcalpb Senior Member Join Date: Oct 2013 Drives: '13 DGM BRZ Limted Location: SF Bay Area Posts: 2,242 Thanks: 1,171 Thanked 836 Times in 555 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Anyone know a good way to remove the stains from my driver seat?

User Name		Remember Me?
Password