Recaro Pole Position side mounts - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

gpvecchi · 12-30-2022, 04:55 PM

I fitted a Recaro Pole Position ABE with its specific ABE brackets, but it sits quite high.
Do you know if the FIA side mounts can be fitted on the ABE model?
They should be lower.
Or, can you recommend another specific side mount?
Thanks!

Ruben_86_ · 02-08-2023, 05:24 PM

Quote:

Originally Posted by gpvecchi

I fitted a Recaro Pole Position ABE with its specific ABE brackets, but it sits quite high.
Do you know if the FIA side mounts can be fitted on the ABE model?
They should be lower.
Or, can you recommend another specific side mount?
Thanks!

I am in the process of manufacturing and selling some side supports for recaro pole position abe using the oem sliding guides

You can talk to me on Instagram if you're interested, I should have them ready for production in few weeks

@Ruben_86_

gpvecchi · 02-09-2023, 02:07 AM

Thank you very much, but I have the JDM specific Recaro sliders. Do you plan to make a standard, but lower side brackets too?

Ruben_86_ · 02-09-2023, 03:33 AM

no, I like to use the original sliders, they work much better than the recaro or any aftermarket brand.

over time they get loose and make noise, while the oem ones are much more rigid and slide smoother

Mike_ZN6 · 02-09-2023, 11:50 AM

Quote:

Originally Posted by Ruben_86_

I am in the process of manufacturing and selling some side supports for recaro pole position abe using the oem sliding guides

You can talk to me on Instagram if you're interested, I should have them ready for production in few weeks

@Ruben_86_

@Ruben_86_ those look awesome! Is that your interior? I want that same setup with dual Recaro Pole Positions. Do you have any more pics? I don't have instagram (I searched for you and it says your account is private).

Ruben_86_ · 02-09-2023, 02:25 PM

Quote:

Originally Posted by Mike_ZN6

@Ruben_86_ those look awesome! Is that your interior? I want that same setup with dual Recaro Pole Positions. Do you have any more pics? I don't have instagram (I searched for you and it says your account is private).

yes, it's my car, I don't have many photos of the interior

I am very happy with the seats, they are much more comfortable than they seem, everyone who travels with me tells me so.

gpvecchi · 02-09-2023, 04:48 PM

To use stock sliders, they need to be cut away from the seat, I'm not interested in damaging stock seat.
Sorry, but Recaro sliders are top notch, much better than stock ones and will not get play during time. They are made by Klippan, that's the stock producer for many german cars.

NoHaveMSG · 02-09-2023, 06:21 PM

Quote:

Originally Posted by gpvecchi

To use stock sliders, they need to be cut away from the seat, I'm not interested in damaging stock seat.
Sorry, but Recaro sliders are top notch, much better than stock ones and will not get play during time. They are made by Klippan, that's the stock producer for many german cars.

No, they unbolt after you remove some plastic clips. No cutting.

Ruben_86_ · 02-09-2023, 07:27 PM

Quote:

Originally Posted by gpvecchi

To use stock sliders, they need to be cut away from the seat, I'm not interested in damaging stock seat.
Sorry, but Recaro sliders are top notch, much better than stock ones and will not get play during time. They are made by Klippan, that's the stock producer for many german cars.

I also have the recaro and they do not have the quality of the originals.

Falkon240 · 02-10-2023, 01:15 PM

Bride FG is low in these cars. The lowest setting is so low the bottom of my bucket seat was sitting on the floor.

You can see how much lower my driver seat is (side mount) bride FG seat rails versus my passenger (bottom mount) Bride MO

gpvecchi · 02-10-2023, 05:32 PM

Unluckily I don't thik that Bride FG sliders fits Pole Position, as the maximum width is 395mm, while the PP is 405. PP will hit the sliders, while typical japanese buckets fit between them, so they can go much lower.

Ruben_86_ · 02-12-2023, 07:29 AM

Quote:

Originally Posted by gpvecchi

Unluckily I don't thik that Bride FG sliders fits Pole Position, as the maximum width is 395mm, while the PP is 405. PP will hit the sliders, while typical japanese buckets fit between them, so they can go much lower.

430mm

Mike_ZN6 · 03-04-2023, 06:42 PM

Quote:

Originally Posted by Ruben_86_

yes, it's my car, I don't have many photos of the interior

I am very happy with the seats, they are much more comfortable than they seem, everyone who travels with me tells me so.

@Ruben_86_ Were you able to install the driver/passenger Recaros and disable all the dash lights for the air bags, etc. ?

churchx · 03-05-2023, 08:41 PM

I wonder if such custom made side mount brackets:
1) don't net extra width due their shape like L, not 7, like in later schematic pics?
2) if they cannot be made adjustable for wider selection of seats .. by simply changing their bottom mount holes to longer slots?

12-30-2022, 04:55 PM	#1
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 1,002 Thanks: 399 Thanked 328 Times in 182 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Recaro Pole Position side mounts I fitted a Recaro Pole Position ABE with its specific ABE brackets, but it sits quite high. Do you know if the FIA side mounts can be fitted on the ABE model? They should be lower. Or, can you recommend another specific side mount? Thanks! Last edited by gpvecchi; 03-06-2023 at 05:30 PM.

02-10-2023, 01:15 PM	#10
Falkon240 Member Join Date: Oct 2022 Drives: 2013 FRS Location: Riverside County Posts: 78 Thanks: 34 Thanked 31 Times in 23 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Bride FG is low in these cars. The lowest setting is so low the bottom of my bucket seat was sitting on the floor. You can see how much lower my driver seat is (side mount) bride FG seat rails versus my passenger (bottom mount) Bride MO __________________ IG 2013 Scion FR-S 2022 Chevrolet Colorado ZR2 Bison 1998 Nissan 240SX KA24DET

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Recaro Pole Position	MrAsh2222	Canada Classifieds	2	06-27-2021 03:13 PM
Recaro Pole position	timandytimandy	Interior Parts (Incl. Lighting)	1	08-30-2017 12:40 PM
Recaro Pole Position	Gliderx	Tracking / Autocross / HPDE / Drifting	1	04-06-2016 08:07 PM
FS: Recaro Pole position leather	peebking	Canada Classifieds	0	03-10-2016 05:08 PM

02-09-2023, 02:07 AM	#3
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 1,002 Thanks: 399 Thanked 328 Times in 182 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Thank you very much, but I have the JDM specific Recaro sliders. Do you plan to make a standard, but lower side brackets too?

02-09-2023, 03:33 AM	#4
Ruben_86_ Member Join Date: Sep 2022 Drives: Toyota GT86 Location: spain Posts: 50 Thanks: 28 Thanked 50 Times in 22 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	no, I like to use the original sliders, they work much better than the recaro or any aftermarket brand. over time they get loose and make noise, while the oem ones are much more rigid and slide smoother

02-09-2023, 04:48 PM	#7
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 1,002 Thanks: 399 Thanked 328 Times in 182 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	To use stock sliders, they need to be cut away from the seat, I'm not interested in damaging stock seat. Sorry, but Recaro sliders are top notch, much better than stock ones and will not get play during time. They are made by Klippan, that's the stock producer for many german cars.

02-10-2023, 05:32 PM	#11
gpvecchi Senior Member Join Date: Mar 2018 Drives: Toyota 86 GT Limited PP (Model G) Location: Italy Posts: 1,002 Thanks: 399 Thanked 328 Times in 182 Posts Mentioned: 14 Post(s) Tagged: 0 Thread(s)	Unluckily I don't thik that Bride FG sliders fits Pole Position, as the maximum width is 395mm, while the PP is 405. PP will hit the sliders, while typical japanese buckets fit between them, so they can go much lower.

03-05-2023, 08:41 PM	#14
churchx Senior Member Join Date: Mar 2015 Drives: 2014 GT86 Location: Latvia, Riga Posts: 4,332 Thanks: 695 Thanked 2,083 Times in 1,434 Posts Mentioned: 53 Post(s) Tagged: 1 Thread(s)	I wonder if such custom made side mount brackets: 1) don't net extra width due their shape like L, not 7, like in later schematic pics? 2) if they cannot be made adjustable for wider selection of seats .. by simply changing their bottom mount holes to longer slots?

User Name		Remember Me?
Password