2022+ BRZ/GR86 CANbus Adapter - Ansix Auto - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Ansix Auto · 10-17-2022, 03:31 PM

The 2022+ BRZ/GR86 does not have CAN bus connected to the OBD2 port for data logging. For those that want to run data acquisition software for track use, using the old OBD2 protocol is slow and lacking some critical telemetry inputs that are only in the CAN stream.

This wiring harness adapter tees into the CAN network through a module in the passenger side behind the glovebox. This adapter adds a second OBD2 connector in the glovebox specifically for data acquisition. This gives very fast response for vehicle telemetry like engine RPM, Speed, Steering Angle, Brake Pressure, Throttle Position, Coolant Temperature, etc.

This gives you vital insights to maximize your on track performance. Install is simple and will not impact any other systems in the car. Mounting the plug in the glove box is done with one OEM screw + another self tapping screw into the inside of the glovebox for a stealth install. This harness connector ONLY supports CAN bus. For regular OBD2 (such as pulling/clearing codes) use the standard one under the steering column. Recommended to be used with something like OBXLink MX+, RaceCapture, or similar CAN enabled devices.

OBXLink MX+ shown in photos is not included.

https://ansixauto.com/2022-brz-gt86-can-adapter/

Price: $75 USD

Here is a video using RaceChrono app paired with OBXLink MX+ and a Racebox Mini.

RT-BRZ · 10-18-2022, 07:22 AM

You list this as 2022+ so is it safe to assume that this does not work with the 2013-2021 platform?

Wally86 · 10-18-2022, 08:49 AM

Quote:

Originally Posted by RT-BRZ

You list this as 2022+ so is it safe to assume that this does not work with the 2013-2021 platform?

I was wondering this also.

andys_garage · 10-18-2022, 12:31 PM

It plugs into the active sound control plug behind the glovebox - I believe gen 1 had CAN available on the standard OBD port and thus this isn't required.

Also, the margins on this are huge, probably $10-15 in parts here if you're making it yourself.

Ansix Auto · 10-18-2022, 02:20 PM

This part is specific to the second gen cars.

The price of this part is not dictated by the parts cost but rather the labor involved in assembly since they’re made my hand.

RT-BRZ · 10-18-2022, 03:29 PM

Quote:

Originally Posted by Ansix Auto

This part is specific to the second gen cars.

The price of this part is not dictated by the parts cost but rather the labor involved in assembly since they’re made my hand.

Thanks for the clarification. It does seem like a quality part and the price does make sense given the rate of production.

Thanks for the info.

Ansix Auto · 01-17-2023, 04:20 PM

We're running a new promotion for the new year!

Buy any GR86 or BRZ product from our site and use the code "knob" for free shift knob!

(Minimum purchase of $75)

Aroundomaha · 02-20-2023, 06:47 PM

I bought and installed this via Petrel Data since I'm a SoloStorm user. Thank you for taking time to put this together and offering it to the market. To be honest I wanted the data but would not have taken time to create my own adapter, so this option was perfect for me.

jflogerzi · 02-21-2023, 07:46 PM

Quote:

Originally Posted by RT-BRZ

You list this as 2022+ so is it safe to assume that this does not work with the 2013-2021 platform?

You don't need an adapter. You can use this exact combo. The First gen can get access to can bus via OBOII port. You will need to configure the data sources. Look into this page

https://github.com/timurrrr/RaceChronoDiyBleDevice

Ansix Auto · 03-17-2023, 02:24 PM

We're running a contest for a free shift knob.

We're looking for the HOTTEST hot lap. Post your hot lap videos here. Bonus points if you're using our Canbus adapter to get more telemetry on the video. We're picking a winner at the end of the month. Good luck! We're waiting to see your videos!

jgao20 · 07-03-2023, 09:35 PM

Hey, I have a Aim Solo can bus wire, how should I connect your connector to the aim solo one?

RedReplicant · 07-04-2023, 05:01 PM

Quote:

Originally Posted by jgao20

Hey, I have a Aim Solo can bus wire, how should I connect your connector to the aim solo one?

AIM sells a cable that has an OBD end... but it is the same cable as their flying lead CAN one soldered into an adapter (I went in the reverse direction as you, I desoldered an OBD cable and pinned it to CAN). If you want to save some money and don't want to cut up the Ansix one you can buy a generic OBD end from Amazon and solder your CAN harness to the matching pins.

10-17-2022, 03:31 PM	#1
Ansix Auto FT86Club Official Vendor Join Date: Oct 2022 Drives: 2023 BRZ Location: Canada Posts: 64 Thanks: 5 Thanked 77 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	2022+ BRZ/GR86 CANbus Adapter - Ansix Auto The 2022+ BRZ/GR86 does not have CAN bus connected to the OBD2 port for data logging. For those that want to run data acquisition software for track use, using the old OBD2 protocol is slow and lacking some critical telemetry inputs that are only in the CAN stream. This wiring harness adapter tees into the CAN network through a module in the passenger side behind the glovebox. This adapter adds a second OBD2 connector in the glovebox specifically for data acquisition. This gives very fast response for vehicle telemetry like engine RPM, Speed, Steering Angle, Brake Pressure, Throttle Position, Coolant Temperature, etc. This gives you vital insights to maximize your on track performance. Install is simple and will not impact any other systems in the car. Mounting the plug in the glove box is done with one OEM screw + another self tapping screw into the inside of the glovebox for a stealth install. This harness connector ONLY supports CAN bus. For regular OBD2 (such as pulling/clearing codes) use the standard one under the steering column. Recommended to be used with something like OBXLink MX+, RaceCapture, or similar CAN enabled devices. OBXLink MX+ shown in photos is not included. https://ansixauto.com/2022-brz-gt86-can-adapter/ Price: $75 USD Here is a video using RaceChrono app paired with OBXLink MX+ and a Racebox Mini.

01-17-2023, 04:20 PM	#7
Ansix Auto FT86Club Official Vendor Join Date: Oct 2022 Drives: 2023 BRZ Location: Canada Posts: 64 Thanks: 5 Thanked 77 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	We're running a new promotion for the new year! Buy any GR86 or BRZ product from our site and use the code "knob" for free shift knob! (Minimum purchase of $75) __________________ Check out our GR86 and BRZ products! https://ansixauto.com/subaru/

02-20-2023, 06:47 PM	#8
Aroundomaha Member Join Date: Oct 2021 Drives: 2022 BRZ Location: NE Posts: 32 Thanks: 84 Thanked 14 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Thanks! I bought and installed this via Petrel Data since I'm a SoloStorm user. Thank you for taking time to put this together and offering it to the market. To be honest I wanted the data but would not have taken time to create my own adapter, so this option was perfect for me.

03-17-2023, 02:24 PM	#10
Ansix Auto FT86Club Official Vendor Join Date: Oct 2022 Drives: 2023 BRZ Location: Canada Posts: 64 Thanks: 5 Thanked 77 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	We're running a contest for a free shift knob. We're looking for the HOTTEST hot lap. Post your hot lap videos here. Bonus points if you're using our Canbus adapter to get more telemetry on the video. We're picking a winner at the end of the month. Good luck! We're waiting to see your videos! __________________ Check out our GR86 and BRZ products! https://ansixauto.com/subaru/

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

10-18-2022, 07:22 AM	#2
RT-BRZ FNG Join Date: Jan 2021 Drives: 2013 Subaru BRZ Location: Columbus, OH Posts: 299 Thanks: 374 Thanked 174 Times in 108 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	You list this as 2022+ so is it safe to assume that this does not work with the 2013-2021 platform?

10-18-2022, 12:31 PM	#4
andys_garage Member Join Date: May 2022 Drives: 2022 GR86 Premium Track bRed Location: Ohio Posts: 63 Thanks: 16 Thanked 40 Times in 24 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	It plugs into the active sound control plug behind the glovebox - I believe gen 1 had CAN available on the standard OBD port and thus this isn't required. Also, the margins on this are huge, probably $10-15 in parts here if you're making it yourself.

10-18-2022, 02:20 PM	#5
Ansix Auto FT86Club Official Vendor Join Date: Oct 2022 Drives: 2023 BRZ Location: Canada Posts: 64 Thanks: 5 Thanked 77 Times in 34 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	This part is specific to the second gen cars. The price of this part is not dictated by the parts cost but rather the labor involved in assembly since they’re made my hand.

07-03-2023, 09:35 PM	#11
jgao20 Junior Member Join Date: Jul 2022 Drives: 2022 GR86 Location: CA Posts: 1 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hey, I have a Aim Solo can bus wire, how should I connect your connector to the aim solo one?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2022 GR86 or keep my modified 13' frs	jiffyjhn	GR86 General Topics (2nd Gen 2022+ Toyota 86)	75	02-19-2022 01:59 AM
2022 GR86 Premium Results @ Car and Driver Lightning Lap 2022 Competition	Hachiroku	GR86 General Topics (2nd Gen 2022+ Toyota 86)	13	02-13-2022 12:44 AM
2022 BRZ/GR86 Fuse Tap?	Midnightsky	Cosmetic Modification (Interior/Exterior/Lighting)	1	01-24-2022 01:05 PM
2022 GR86 MSRP 2k over the BRZ?	mangler	CANADA	5	12-06-2021 11:51 AM
Reading OBDII and CANBUS over OBDII-Bluetooth adapter?	wparsons	Electronics \| Audio \| NAV \| Infotainment	8	06-12-2013 08:17 PM

User Name		Remember Me?
Password