Minnesota Check In - Page 96 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

M3GH4N · 03-29-2013, 05:26 PM

Quote:

Originally Posted by mityfang

Isn't a 35% tint illegal in MN? I want to do a 35% tint to my frs too but I'm worried about the cops.

Yes it is illegal but I had it on my tC for 2 1/2 years and only got pulled over twice for it, and just got a verbal warning. Just my experience with it. You can always do darker tint in the back and 50% on the fronts, the dark tint in the back will make it look darker all around. I personally just chose to go with 35 because it looks good

mityfang · 03-29-2013, 09:43 PM

Quote:

Originally Posted by Chupacabra

Yes, 50% is max amount of light transferral you can have legally in the state.

Almost all tint shops will not go to a lower percentage unless you have an optometrist's note or a dermatologist's note to request a lower percent.

Even if the shop installs the tint, you can still get a ticket from law enforcement because it breaks the law. It's a screwy law considering how bright/ reflective this state is year round.

Ok. Thats what I've read. I really wish MN could be like most other states... 35 looks good

mityfang · 03-29-2013, 09:44 PM

Quote:

Originally Posted by M3GH4N

Yes it is illegal but I had it on my tC for 2 1/2 years and only got pulled over twice for it, and just got a verbal warning. Just my experience with it. You can always do darker tint in the back and 50% on the fronts, the dark tint in the back will make it look darker all around. I personally just chose to go with 35 because it looks good

Ok. I'm still undecided. But yours looks nice!

neutron256 · 03-30-2013, 01:27 AM

Well I started my swaybar installation tonight and was thwarted by a rounded off nut. I'll be at Luce tomorrow, however I may or may not be in the BRZ depending on how quickly everything goes back together.

mityfang · 03-30-2013, 02:28 AM

Wish I could come. On my way back from the roadtrip to California

Starscream15 · 03-30-2013, 11:32 AM

Quote:

Originally Posted by Chupacabra

So Luce in Hopkins at 11:15 tomorrow?

1. @ayau
2. @Starscream15
3. @neutron256
4. Chupacabra
5.

I'm good for 11:15. Going to install the oil Valve today and fresh oil, woot! Installed my side markers yesterday. Wheels are en-route from Cali.

LeeMaster · 03-30-2013, 11:33 AM

It's raining today, beautiful spring weather, see you guys @ 11:15.

1. @ayau
2. @Starscream15
3. @neutron256
4. Chupacabra
5. LeeMaster

EDIT: Nice seeing you all today

Starscream15 · 03-31-2013, 02:06 PM

FYI: Breggfast pizza tastes just as good reheated as it does in the restaurant. This thing easily knocked out this mornings hangover.

LeeMaster · 03-31-2013, 04:27 PM

Saw a nice looking white brz limited heading east on 94 by snelling ave. Anyone in here?

M3GH4N · 04-01-2013, 10:01 AM

Spent part of yesterday installing coilovers and took some pictures for you guys...

Before

After. (Lighting was a little different at this point)

Final product:

Took us about 2 1/2 hours to get to the height I wanted, with a couple adjustments.

Starscream15 · 04-01-2013, 10:04 AM

Quote:

Originally Posted by M3GH4N

Spent part of yesterday installing coilovers and took some pictures for you guys...

Very nice! What shop is this? Looks to be right off American BLVD in Bloomington?

EDIT: OH! And you're one the lucky ones who got Bridgestones rather than Prius donuts!

neutron256 · 04-01-2013, 10:57 AM

Thanks to all who came to brunch Saturday. It was great seeing all the changes you've made to your cars.

Red, white, and blue

I had to come in my Fit because...

A pain in the ass rounded off nut resulted in a delay in finishing the upgrades I started Friday night.

-Cusco front and rear strut tower braces (w/Master Cylinder brace)
-Perrin Front and Rear Sway Bars
-Knockoff OEM rear diffuser
-Summer wheels and tires

After seeing @mityfang's rear diffuser I was inspired to install my knockoff one. I was able to install it without completely removing the rear bumper cover, but I did still have to loosen the sides.

Some crappy pics thanks to poor lighting, and a dirty car. The clean new diffuser on a dirty bumper looks very strange.

M3GH4N · 04-01-2013, 11:32 AM

Quote:

Originally Posted by Starscream15

Very nice! What shop is this? Looks to be right off American BLVD in Bloomington?

EDIT: OH! And you're one the lucky ones who got Bridgestones rather than Prius donuts!

It's at Bobby & Steve's off France Ave

Starscream15 · 04-01-2013, 12:11 PM

Speaking of the knock-off rear diffuser, please do link me! Search function never works for me

Meghan, there are a few of us always in the Bloomington area. We should all meet up for lunch sometime. I vote for Jason's deli.

03-30-2013, 01:27 AM	#1334
neutron256 Senior Member Join Date: Jan 2012 Drives: '13 GBS Subaru BRZ Location: Minneapolis, MN Posts: 2,030 Thanks: 680 Thanked 664 Times in 382 Posts Mentioned: 26 Post(s) Tagged: 1 Thread(s)	Well I started my swaybar installation tonight and was thwarted by a rounded off nut. I'll be at Luce tomorrow, however I may or may not be in the BRZ depending on how quickly everything goes back together. __________________ -Fortes fortuna adiuvat (Fortune favors the bold)

03-30-2013, 11:33 AM	#1337
LeeMaster Red wine Join Date: Oct 2012 Drives: Subaru BRZ(R.I.P) Location: Denied Posts: 1,176 Thanks: 1,268 Thanked 342 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	It's raining today, beautiful spring weather, see you guys @ 11:15. 1. @ayau 2. @Starscream15 3. @neutron256 4. Chupacabra 5. LeeMaster EDIT: Nice seeing you all today __________________ Last edited by LeeMaster; 03-30-2013 at 08:42 PM.

03-31-2013, 04:27 PM	#1339
LeeMaster Red wine Join Date: Oct 2012 Drives: Subaru BRZ(R.I.P) Location: Denied Posts: 1,176 Thanks: 1,268 Thanked 342 Times in 240 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Saw a nice looking white brz limited heading east on 94 by snelling ave. Anyone in here? __________________

04-01-2013, 10:57 AM	#1342
neutron256 Senior Member Join Date: Jan 2012 Drives: '13 GBS Subaru BRZ Location: Minneapolis, MN Posts: 2,030 Thanks: 680 Thanked 664 Times in 382 Posts Mentioned: 26 Post(s) Tagged: 1 Thread(s)	Thanks to all who came to brunch Saturday. It was great seeing all the changes you've made to your cars. Red, white, and blue I had to come in my Fit because... A pain in the ass rounded off nut resulted in a delay in finishing the upgrades I started Friday night. -Cusco front and rear strut tower braces (w/Master Cylinder brace) -Perrin Front and Rear Sway Bars -Knockoff OEM rear diffuser -Summer wheels and tires After seeing @mityfang's rear diffuser I was inspired to install my knockoff one. I was able to install it without completely removing the rear bumper cover, but I did still have to loosen the sides. Some crappy pics thanks to poor lighting, and a dirty car. The clean new diffuser on a dirty bumper looks very strange. __________________ -Fortes fortuna adiuvat (Fortune favors the bold)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Check in, eh?	NorthFool	CANADA	24	02-23-2012 08:32 AM
NSFW "Check Out My Subaru" on You Tube	Axel	Other Vehicles & General Automotive Discussions	4	01-17-2010 06:56 PM
how do you check a site	4agze	Off-Topic Lounge [WARNING: NO POLITICS]	3	11-21-2009 10:27 PM
Video of FT-86 @ TMS from Edmunds. Check out how small the car is next to people.	JDMinc	FR-S & 86 Photos, Videos, Wallpapers, Gallery Forum	9	10-25-2009 09:53 PM

03-30-2013, 02:28 AM	#1335
mityfang Member Join Date: Nov 2011 Drives: Ultramarine FRS manual Location: Minnesota Posts: 26 Thanks: 6 Thanked 1 Time in 1 Post Mentioned: 2 Post(s) Tagged: 0 Thread(s)	Wish I could come. On my way back from the roadtrip to California

04-01-2013, 10:01 AM	#1340
M3GH4N Senior Member Join Date: Mar 2013 Drives: '13 FRS whiteout Location: Nashville, TN Posts: 114 Thanks: 19 Thanked 75 Times in 29 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Spent part of yesterday installing coilovers and took some pictures for you guys... Before After. (Lighting was a little different at this point) Final product: Took us about 2 1/2 hours to get to the height I wanted, with a couple adjustments.

User Name		Remember Me?
Password