SOCAL: Local FS/FT

[ChrisGeezy]

Originally Posted by ohhwilliam

WTB
Stock wheels with tires and tpms.
Or stock wheel with tire and tpms trade for Weds tc105n 17x9+35 plus cash on your end.

Are these still available?

[infinitewhiskey]

Selling the following:

RPF1 - Sold

TRD Quickshifter - Sold


ARK Grip exhaust - Sold

[YouShallKnow]

All parts are from a 2013 Scion FR-S and located in Lake Elsinore in the IE

all prices OBO

P&L Motorsports BRZ/FR-S Equal Length 4-1 Header (NA), Catted and Coated
$400


20k total miles on them, I got them here and never installed them.

New OEM Rear Brake Rotors (2x),
$20 each (half price)


V3 20/25 mm Spacers
$25 for set

These make the stock wheels flush. I had one bolt fail on one of the spacers and ended up knocking out all the studs on that spacer, still works with long lugs or you can press the studs back in. Asking $25, originally $100


(2x)Stock Shifters
$20 each

one has the rectangular plate and white plastic bushing, one doesn't.


Used Stock Clutch and Pressure Plate
$25


I also have a few parts of the stock interior and intake that I'll photograph soon to post.

Full album pictures:
https://imgur.com/a/BYk9Oy0

Take the lot and save!

[pinoy_dorifto]

SOLD!

[pinoy_dorifto]

Originally Posted by infinitewhiskey

Selling the following:

RPF1 - $900
5x100 17x9+45
Some curb rash. Used as my track wheels.
Has RE-71R on the wheels, barely at the wear bar.
Will throw in some used RSRRs.








TRD Quickshifter - $100
One of the boots is slightly ripped but it affect how the part works.




ARK Grip exhaust - $800
Some scratches from being low. Comes with hardware but needs new gaskets.

ygpm

[asdf]

FS: TRD RS1 quad tip exhaust - cat back

$600 picked up

[HachiRolle]

Originally Posted by asdf

FS: TRD RS1 quad tip exhaust - cat back

$600 picked up

PM’d

[DGMlJDlBRZ]

Originally Posted by DGMlJDlBRZ

Got some more parts up for sale off my BRZ.

Located in Oxnard.

SuperTek Intake pipe and drop in filter. SOLD

AEM Front Strut Tower Bar. Has built-in master cylinder brace. SOLD

OpenFlash Tablet V1. First owner. First unmarry. Unmarried from car and computer/OpenFlashManager. SOLD

JDL UEL Catless Header. Raw Finish. Nothing wrong with it. SOLD



Set of gold 18x9.5 +38 5x100 Enkei RPF1 with tires for sale.

Bought brand new 4 years ago and put approximately 25K daily driven miles on them. Original gold finish, never been refinished. Wheels do have some knicks and rock chips, but no curb rash, no cracks, no bends, etc. Original red Enkei stickers and original red (faded to pink) aluminum valve stems.

Tires are 255/35R18 Bridgestone Potenza S-04 Pole Position. Have only put approximately 5k miles on them. No camber or toe wear. Gauge shows treadwear depth of about 8/32 on all four tires, or about 85% tread left.

I will also throw in a set of Honda centercaps that fit perfectly painted a matching gold, and a set of used/beat up red Muteki SR35 lug nuts/locks.

$1,400

SuperTek intake SOLD.

RPF1s are all that's left

[Pekingduck]

Used Whiteline front under brace $50 pickup




Rare New Carbing Aluminum Air Intake Suction Kit $200 Pickup or $225 shipped

Retail for $500




Used Billet Pro Shop 100 series 430g countersunk stainless steel shift knob $30 pickup or $35 shipped




DC sports brand new but not in box. $450 pickup

[Phantobe]

BUMP Price Drop OBO

Originally Posted by Phantobe

FS: Berk HFC Front Pipe - $200





FS: Stivo Ducktail Spoiler - $150

Needs to be repainted, obviously. Sold as is.









FS: OEM Front Pipe - $80



FS: Valenti "Red Lens" Tailights - $150

So I've had bad luck with these lights, fixed them multiple times (don't feel like fixing them again). Three red LEDs have bad solder joints on the LHand tail light. They are fixable by just re-soldering the joint, however the back of the housing is tore up because the best way to get to the LEDs is just to cut into the plastic, I resealed them with ducktape and a buttload of RTV. RHand tail light is working fine.

[SorX]

SOLD ~ MXP Comp RS $400

Installed it on my car and driven around the block before I decided it wasn't the sound I was looking for. Preferred pickup in FV.

[Decimus]

STOPTECH SPORT BRAKE PADS (FRONT)
Used for 1000 miles. Nearly new.

$50obo pickedup in LA





BuddyClub V1 Tail lights
All LED work, no condensation issues. Driver side housing looks to have unclipped itself a little but works fine.
$350obo

[bored@work84]

Carbon fiber fender aero fins. Minor inperfections on weave near the edges but nothing too bad. Clear chipped off on the corner on one of them. Priced reflects on condition. Pick up in
Asking $80
Los Angeles area.

Text 818-284-0415 for pics

[pinetree]

Selling my car, sad to see it go but going to Europe on job assignment.

Live in Arizona, letting my SoCal peeps know. Check out link for more info.

http://www.ft86club.com/forums/showthread.php?t=129248