1/4 Mile times - Page 8 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Kwaziekeller · 07-01-2013, 05:15 PM

Went to a local track the other night, low 70deg temps in late June are rare here lol. Was a good night, had some 10.5 outlaw cars out and it was slow so they prepped and dragged the track a few times here and there. Only a 1000' track tho....

60': 2.202
330': 6.176
1/8th: 9.498 @ 74.88mph
1000': 12.143 @ 86.74mph

Lowered the stock Michilen's to 28psi, only "power mods" are an aFe drop in air filter, muffler delete and Perrin lightweight crank pulley. Other than that... I've got Hotchkis springs and SPC lower control arms with the rear camber at about -.1 deg (almost straight up, aka not great for cornering but good for tire wear and straight line stuff). The 12.14 was with a cooled off car and warmed up slightly (below normal op temp at start), ran 12.4xx all night with a heat soaked engine tho.

Simmons · 07-14-2013, 01:24 AM

So I went to the drag strip tonight. I couldn't have picked a worse night to go, 84 degrees and 100% humidity.

I only got 5 runs in. I was having problems on my first run getting traction and spun 1st and 2nd gear. After that I got better launches.

My best was a 14.40 at 97.41 mph.

Simmons

rx3 · 07-17-2013, 06:31 AM

(Frustrating?) side note: This electric family car with a curb weight of 4,670 lbs got 12.37 @ 110.84 mph (stock configuration).
http://gas2.org/2013/01/29/video-tes...racing-record/

troek · 07-17-2013, 09:34 AM

thats not surprising considering the power it makes

Rampage · 07-17-2013, 11:19 AM

Quote:

Originally Posted by rx3

(Frustrating?) side note: This electric family car with a curb weight of 4,670 lbs got 12.37 @ 110.84 mph (stock configuration).
http://gas2.org/2013/01/29/video-tes...racing-record/

Ummm. How much does that cost again?

rx3 · 07-17-2013, 12:02 PM

Quote:

Originally Posted by troek

thats not surprising considering the power it makes

With 240 hp our cars would already have the same weight to power ratio.

WRBRZ · 07-17-2013, 06:44 PM

I'm glad people are taking their BRZ's to the track. Straight line car, or not, it has so much potential to be quick. Light weight, decent gearing, RWD, and a motor that seems to hold up well to starter F/I kits.

Has anybody done a pass with a non-stock clutch/flywheel? Maybe an FX300 kit? I'm throwing in that setup, and an SRT headerback, and am interested to see what it'll pick up off the line.

troek · 07-17-2013, 08:31 PM

with the right tires and 300 whp these cars could easily get into the 12s. its cool to see them hit 13s on the stock tires.

Dipstik-sportech · 07-18-2013, 12:05 AM

Well in a few weeks I'll be heading to the track again with 26" drag radials and 120 more whp. Should be exciting, I'm taking bets on what will break first tranny, diff or axles lol

Simmons · 07-18-2013, 12:42 AM

Quote:

Originally Posted by Dipstik-sportech

Well in a few weeks I'll be heading to the track again with 26" drag radials and 120 more whp. Should be exciting, I'm taking bets on what will break first tranny, diff or axles lol

I got money on the axle breaking.

Simmons

Dipstik-sportech · 07-18-2013, 01:10 AM

Quote:

Originally Posted by Simmons

I got money on the axle breaking.

Simmons

I wish someone made aftermarket replacements for spares lol

troek · 07-18-2013, 04:18 AM

crawford performance is running upgraded axles on there turbo car i believe.

Dipstik-sportech · 07-18-2013, 10:25 AM

Yeah I was looking more for stock replacements rather that $1000 dss upgrades

love 4 boost · 07-24-2013, 02:57 PM

Last time I went to the track was may 1st
Englishtown raceway park
60' - 2.327
1/4 - 15.354
Mph - 91
I weigh around 280lbs
I will be going to island dragway tonight and hopefully better my time. I will update you all if I do.

07-14-2013, 01:24 AM	#100
Simmons Senior Member Join Date: Jun 2012 Drives: 2024 GR86/ 2015 FRS Location: PA Posts: 961 Thanks: 306 Thanked 575 Times in 269 Posts Mentioned: 17 Post(s) Tagged: 0 Thread(s)	So I went to the drag strip tonight. I couldn't have picked a worse night to go, 84 degrees and 100% humidity. I only got 5 runs in. I was having problems on my first run getting traction and spun 1st and 2nd gear. After that I got better launches. My best was a 14.40 at 97.41 mph. Simmons __________________ 2024 GR86 71 STR/ 2015 FRS 71 STX Sponsors Xero-Limit//Karcepts

07-17-2013, 06:44 PM	#105
WRBRZ Member Join Date: Jun 2013 Drives: '92 30R Talon, '13 BRZ Location: CT Posts: 26 Thanks: 3 Thanked 4 Times in 3 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I'm glad people are taking their BRZ's to the track. Straight line car, or not, it has so much potential to be quick. Light weight, decent gearing, RWD, and a motor that seems to hold up well to starter F/I kits. Has anybody done a pass with a non-stock clutch/flywheel? Maybe an FX300 kit? I'm throwing in that setup, and an SRT headerback, and am interested to see what it'll pick up off the line. __________________ WR '13 BRZ Premium 6MT - Visconti Stage 1 Tune, SRT Headerback, FX350 '92 Talon - FP3052, 503awhp, Mustang dyno

07-18-2013, 12:05 AM	#107
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s) Tagged: 0 Thread(s)	Well in a few weeks I'll be heading to the track again with 26" drag radials and 120 more whp. Should be exciting, I'm taking bets on what will break first tranny, diff or axles lol __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

07-18-2013, 10:25 AM	#111
Dipstik-sportech Senior Member Join Date: Oct 2012 Drives: 2013 BRZ satin white pearl sportech Location: Thunder Bay Ontario Canada Posts: 1,813 Thanks: 842 Thanked 911 Times in 576 Posts Mentioned: 43 Post(s) Tagged: 0 Thread(s)	1/4 Mile times Yeah I was looking more for stock replacements rather that $1000 dss upgrades __________________ 2013 SWP BRZ sportech. 11.11sec@129.01mph, 511whp on e70. FullBlown base kit, FullBlown built 9.5:1 engine, GTX3076R GEN2 turbo, 1700cc Bosch injectors, FullBlown flex fuel kit, FullBlown radiator and oil cooler, FullBlown custom 3" dual exit exhaust, act xtreme clutch, whiteline diff and subframe inserts, BC Racing coilovers, hotchkiss 18mm rear sway, is300 3.73 differential ... Never finished

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Scion's free 2 year/25K mile maintenance plan?	whtchocla7e	Scion FR-S / Toyota 86 GT86 General Forum	25	06-06-2012 04:26 PM
La Times reviews BRZ	Sport-Tech	BRZ First-Gen (2012+) — General Topics	7	05-18-2012 12:11 PM
He lives his life 1 quarter mile at a time	ucla bruin	Other Vehicles & General Automotive Discussions	8	12-21-2011 08:04 PM
$95 Track day at Willow Springs- Horse Thief Mile-Oct 16th	Louie	Southern California	1	10-11-2011 01:31 AM
$85 Track day at Willow Springs- Horse Thief Mile - April 2-3rd in SoCal	Louie	Southern California	2	03-20-2011 06:17 AM

07-17-2013, 06:31 AM	#101
rx3 Senior Member Join Date: Mar 2013 Drives: BRZ Location: Europe Posts: 350 Thanks: 53 Thanked 114 Times in 71 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	(Frustrating?) side note: This electric family car with a curb weight of 4,670 lbs got 12.37 @ 110.84 mph (stock configuration). http://gas2.org/2013/01/29/video-tes...racing-record/

07-24-2013, 02:57 PM	#112
love 4 boost Member Join Date: May 2013 Drives: Raven black FR-S Location: New Jersey Posts: 27 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Last time I went to the track was may 1st Englishtown raceway park 60' - 2.327 1/4 - 15.354 Mph - 91 I weigh around 280lbs I will be going to island dragway tonight and hopefully better my time. I will update you all if I do.

User Name		Remember Me?
Password