FA20Club Turbo Kit Owners Topic - Page 77 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

PineappleFriedRice · 12-25-2013, 07:11 AM

Quote:

Originally Posted by Dan@AWD

Post a pic of your turbo compressor housing. Which turbo did you choose?

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

Here is a pic of when I first got it. I got the 60 trim

Ross · 12-25-2013, 02:03 PM

drill in the circle right in front of the A for a\r. then tap and put your port there. I recommend removing the compressor housing for this.

woode · 12-25-2013, 10:26 PM

Woo! Just ordered the stage 1, .60 trim, uel. Isis exhaust, p3cars gauge.

Should be a good start on the base 5psi tune while I make up my mind on fuel mods, boost controller, oil cooler, and clutch..

Hopefully next weekend I can have some pics up... assuming shipping isnt too slow.

Brick · 12-26-2013, 02:23 PM

Yea, still haven't received all of the parts on mine and I ordered in the middle of July. Some of it was due to me leaving and communication errors but I think that the demand has very much outgrown the supply of these kits due to the price. Also my turbo did not have a vacuum nipple tapped for the wastegate as well. This whole thing has taught me my lesson though, if there ever is a next time I'm just gonna bite the bullet and make my own turbo kit and cut out the middleman. I think if you are local FA20club is still a viable option, Toni seems very knowledgeable and forthright but getting ahold of him can be a chore. All in all we will have to see if it's been worth the wait once the full kit is here.

PineappleFriedRice · 12-26-2013, 06:23 PM

car is running, just need to get vacuum lines/fittings for bov and Wastegate. will post start up videos soon and drive by videos when bov hooked up

Sent from my SGH-T769 using Tapatalk 2

pixel67 · 12-27-2013, 09:36 AM

Quote:

Originally Posted by PineappleFriedRice

car is running, just need to get vacuum lines/fittings for bov and Watergate. will post start up videos soon and drive by videos when bov hooked up

Sent from my SGH-T769 using Tapatalk 2

Congrats! Gotta love autocorrect..

Sent from my Nexus 7 using Tapatalk

FAER · 12-27-2013, 02:20 PM

Quote:

Originally Posted by pixel67

Merry Christmas guys! Hope Santa stuffs your stocking with boost controllers and flex fuel kits!

Sent from my SPH-L710 using Tapatalk

Yes he did... I have 99.9% of my parts and Toni has really stepped up in keeping in touch with me.

Hopefully these last few tidbits of Stuff come in the next few weeks and i can get this kit on..

can't wait to see the BW S256 with a .48 AR exhuast housing will do.

Ny Brz · 12-27-2013, 02:50 PM

My car is in the shop now, the original IC piping that they had shipped did not clear the BRZ headlight, they had sent out another piping and it clears the headlight now but the where the bov flange is located interferes with the alternator. Sending piping again let's hope it is correct, maybe third time is a charm.

FAER · 12-27-2013, 03:30 PM

Quote:

Originally Posted by Ny Brz

My car is in the shop now, the original IC piping that they had shipped did not clear the BRZ headlight, they had sent out another piping and it clears the headlight now but the where the bov flange is located interferes with the alternator. Sending piping again let's hope it is correct, maybe third time is a charm.

uhh ohh... I have a BRZ ... i hope this isn't an issue...

Ryan P · 12-27-2013, 03:33 PM

Quote:

Originally Posted by FAER

uhh ohh... I have a BRZ ... i hope this isn't an issue...

Me too , They did ask me if I had a BRZ though and said they would replace it with the new pipe. Hopefully one that has the BOV flange in the correct location.

Ryan P · 12-27-2013, 03:35 PM

Quote:

Originally Posted by Ny Brz

My car is in the shop now, the original IC piping that they had shipped did not clear the BRZ headlight, they had sent out another piping and it clears the headlight now but the where the bov flange is located interferes with the alternator. Sending piping again let's hope it is correct, maybe third time is a charm.

You wouldn't happen to have a picture of the pipe with the bov flange improperly placed would you?

FAER · 12-27-2013, 03:40 PM

EEK I don't think i ever clearly stated that i have a BRZ... I was never asked...

atleast i never recall being asked... if i was i know i would have said i did... guess we'll see when it goes together.

Ryan P · 12-27-2013, 03:54 PM

Quote:

Originally Posted by FAER

EEK I don't think i ever clearly stated that i have a BRZ... I was never asked...

atleast i never recall being asked... if i was i know i would have said i did... guess we'll see when it goes together.

I wasn't asked until inquiring about my kit one day. Presumably after they discovered the issue from NY BRZ. Just shoot them an e-mail now and try to get resolved sooner rather than later.

slicktop · 12-27-2013, 04:04 PM

Just gonna leave this here.

12-26-2013, 06:23 PM	#1069
PineappleFriedRice Truuu Join Date: Mar 2013 Drives: 2013 FRS, 88 EF Civic, 05 Matrix Location: Long Beach, CA / Sacramento, Ca Posts: 283 Thanks: 247 Thanked 99 Times in 60 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Re: FA20Club Turbo Kit Owners Topic car is running, just need to get vacuum lines/fittings for bov and Wastegate. will post start up videos soon and drive by videos when bov hooked up Sent from my SGH-T769 using Tapatalk 2 __________________ GARRET .60 TRIM-UEL HEADERS-1150cc INJECTORS-DW FUEL PUMP-RACESENG CAM PLATE-PERRIN 3" CATBACK-ULTIMATE RACING 2.75 OP/FP-FBM CATCHCAN-SINGER 275AMP ALTERNATOR-MEGAN TRACK COILS-MEGAN F/R STRUTBARS-AXLE EXCHANGE ALUMINUM DRIVESHAFT-ACT 6 PUCK-ANARCHY MOTIVE SHIFTKNOB-XXR 535-HANKOOK VENTUS EVO V2-CS LIP KIT Build Thread - FA20FAIL Archive Last edited by PineappleFriedRice; 12-27-2013 at 12:19 PM.

12-27-2013, 02:50 PM	#1072
Ny Brz Hella Flush Join Date: Aug 2012 Drives: 2013 SWP BRZ Location: Yonkers, NY Posts: 1,090 Thanks: 170 Thanked 332 Times in 251 Posts Mentioned: 20 Post(s) Tagged: 1 Thread(s)	My car is in the shop now, the original IC piping that they had shipped did not clear the BRZ headlight, they had sent out another piping and it clears the headlight now but the where the bov flange is located interferes with the alternator. Sending piping again let's hope it is correct, maybe third time is a charm. __________________ Ny BRZ's Build

12-27-2013, 04:04 PM	#1078
slicktop Senior Member Join Date: Mar 2013 Drives: 2013 Raven FRS 2JZ-GTE/V160 swapped Location: Hampton, VA Posts: 960 Thanks: 376 Thanked 623 Times in 315 Posts Mentioned: 18 Post(s) Tagged: 0 Thread(s)	Just gonna leave this here. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate (Sprintex) Supercharger Owners Topic	DarrenDriven	Forced Induction	9139	12-29-2023 11:58 PM
FA20CLUB TURBO KIT T3/T4 60	86pro	Forced Induction	50	07-26-2014 12:48 PM
Fa20club turbo install issues	Mikegraves777	Forced Induction	8	07-25-2013 01:56 AM
FA20CLUB 60 Trim Turbo 16 PSI Results Are In	FA20Club.com	Forced Induction	148	07-22-2013 09:00 PM
FA20CLUB V2 Turbo Kit Progress	FA20Club.com	Forced Induction	40	05-17-2013 02:26 PM

12-25-2013, 02:03 PM	#1066
Ross Senior Member Join Date: Jun 2013 Drives: 85 corolla gts Location: Chesapeake , Va Posts: 361 Thanks: 17 Thanked 177 Times in 110 Posts Mentioned: 26 Post(s) Tagged: 0 Thread(s)	drill in the circle right in front of the A for a\r. then tap and put your port there. I recommend removing the compressor housing for this.

12-26-2013, 02:23 PM	#1068
Brick Member Join Date: Jul 2013 Drives: White 2013 FRS Location: San Dog Posts: 52 Thanks: 4 Thanked 18 Times in 15 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Yea, still haven't received all of the parts on mine and I ordered in the middle of July. Some of it was due to me leaving and communication errors but I think that the demand has very much outgrown the supply of these kits due to the price. Also my turbo did not have a vacuum nipple tapped for the wastegate as well. This whole thing has taught me my lesson though, if there ever is a next time I'm just gonna bite the bullet and make my own turbo kit and cut out the middleman. I think if you are local FA20club is still a viable option, Toni seems very knowledgeable and forthright but getting ahold of him can be a chore. All in all we will have to see if it's been worth the wait once the full kit is here.

12-27-2013, 03:40 PM	#1076
FAER Banned Join Date: Mar 2013 Drives: Silver BRZ Location: Texas Posts: 361 Thanks: 22 Thanked 118 Times in 86 Posts Mentioned: 10 Post(s) Tagged: 0 Thread(s)	EEK I don't think i ever clearly stated that i have a BRZ... I was never asked... atleast i never recall being asked... if i was i know i would have said i did... guess we'll see when it goes together.

User Name		Remember Me?
Password