NORCAL: Local Marketplace Buy/Sell

[g.rz]

Originally Posted by g.rz

Selling 2018 Performance Package Suspension with about 1150 miles on them for $350, PM me for more information.

Bump selling for $350

SOLD

[JCFRS]

Selling Spec D headlights w/ HID only 100$ meetups Fremont area

[svolo4]

Originally Posted by JCFRS

Selling Spec D headlights w/ HID only 100$ meetups Fremont area

PMd

[Dorkhedeos]

Originally Posted by Dorkhedeos

FS:

HKS EL headers catless 10k miles. $400

Carbotech XP10 Front/Rear (Used for 2 trackdays) and a new set of front Stoptech Powerslot.

Front set $130
Thickest front is 16.31mm (I think new is 16.5mm)
Thinnest front is 16.00mm
Backing plate is about 5.75mm so there is at least 9.25mm of pad left on each.

Rear set $110
Thickest rear is 16.43 (I think new is 16.5mm)
Thinnest rear is 15.39
Backing plate is about 5.1mm so there is at least 10.3mm of pad left on each.

Both sets of pads for $220

Stoptech Powerslot Rotors $115 for the set
126.47021SL
126.47021SR

We can work out a better deal if you buy everything

Images in link:
https://imgur.com/a/2quR5BZ

Located in Santa Rosa, but can meet in SF or Oakland area if needed. PM if you are interested or have questions.

Bump

[ndsleep612]

Originally Posted by ndsleep612

I'm selling my gunmetal RPF1 wheels (17x9.0, +35 offset, 5x100 lug pattern) with used Dunlop Direzza Star Spec IIs 245/40/17 (treadwear close to wear bar).

The wheels have been on my FRS (old daily driver). Condition is very good with two wheels having very minor curb rashes on the end of the wheel lips. Metal valve stems maintains air pressure. Exterior of valve stems has some discoloring.

17x90, + 35 offset wheel with 245/40/17 tires fit perfectly on the FRS/BRZ without needing spacers. No tire rub with this setup.

Asking $950obo cash, SF, Daly City area pickup.

Here's a photo of how the wheels look on a lowered FRS.

SOLD!

[rexchen31]

ISO:Tail as Turn +Backup Module . PM if you got one.

[Thaeyo]

Originally Posted by rexchen31

ISO:Tail as Turn +Backup Module . PM if you got one.

PM'd

[Khristoph_cg]

WTT my TRD catback for something a bit louder, preferably a dual cannon like r400, mxp sp, etc
let me know what ya have. located in alameda

[PRKR8NGR]

Originally Posted by Khristoph_cg

WTT my TRD catback for something a bit louder, preferably a dual cannon like r400, mxp sp, etc
let me know what ya have. located in alameda

I’m not looking for a trade but I do have HKS Spec-L (Ti) catback for sale. $550

[laotianxbrz]

2013 Subaru BRZ Limited Spoiler, Satin White Pearl 300$ OBO

OLM FT86speedfactory Rain Guards (used for 10 miles lol) 50$ OBO

OEM Wheels, 225/45/17 Pilot Sport A/S 3+ 300$ OBO



Exhaust that came with car, no idea what this exhaust is but it's not a bad sounding exhaust tbh (I got some sound clips) 100$ OBO



Ambit RE02 18x9.5 +38 5x100, 245/35/18 Federal RSRR, powder coated in black but wheels are all beat up and curbed. One rim has a slight bend in the front and another one has a medium bend in the back. Would only use two for drifting and scrap the others tbh. 150$ OBO






If you need these take em for free 0$

Or take everything for 750$ and we good to go

[TRDGriffon]

Originally Posted by TRDGriffon

Parting out my FRS, all parts have between 5-10k miles on them. Everything is in like new condition with the exception on normal road wear (rock chips, minor scratches). Pick up only, not willing to travel. Located in Concord.

HKS Hipermax IV SP coilovers - $1100, Front endlinks included, Front spherical joints are a bit noisey ($200 for a new set from HKS) and one of the rear coilovers has a torn boot.



SPL Parts rear lower control arms - $400, hardware included.



Enkei RPF1 Tony Angelo edition 18x9.5 +38 with 255/35R18 Bridgestone RE71Rs - $1500, All wheels are in very good condition, inner barrels have some rock chipping, one wheel has minor damage that was touched up. All tires have about 85% tread life.









Grimspeed brake master cylinder brace - $50, hardware included. SOLD

IRP short shifter - $350, Blue button, hardware included. SOLD

DIY oil cooler - $350, Basically a Perrin replica, Setrab core, Mocal thermostatic sandwich plate and fittings.



ST intake pipe - $100



Cusco rear diff brace - $120, hardware included.



Verus aggressive rear diffuser - $450, hardware included. SOLD

Cusco motor mounts - $200 (no photos, basically new.)

Sorry for the huge photos, posting from my phone. Hopefully photobucket resizes them.

BUMP updated with sold items.

[ghst86]

I'm looking to buy some Seibon carbon fender garnish (or rexpeed). If anybody has a set, please let me know! Can pay cash in person around the North Bay (Napa/Sonoma preferred).

[devtec]

I have a Perrin catback for sale, 2.5” resonated, stainless. Essentially new. Used for a couple months then decided to go a different direction. All hardware present. PM me if interested. Located in San Rafael.

[eherschend]

SOLD