DIY Day

[BRZtoni]

Originally Posted by SPCorBUST

So is it this Sunday the 14th? I have a bunch of parts that might be a cool install for folks to see, was planning for it this weekend but can hang onto it for a bit.

Aluminum Driveshaft
Cusco front under brace
Cusco front control arms
Perrin radiator hoses
Fumoto oil drain valve
Mishimoto thermostat
M.O.R. quick bumper disconnect

I need to raise my coilovers and if I get my hands on some fluid, change my diff fluid as well. If @CSG David can make a miracle happen, I might have these parts to install too:

Cusco Power Brace Rear Side
Cusco Power Brace Rear End
Cusco Rear Crossmember Brace
Cusco Rear Differential Brace

I also have a Top Speed Auto exhaust and lip kit for sale, but I have only posted it on Facebook. If someone picks either of them up this weekend, maybe they can meet us there for another install.

Originally Posted by DGMlJDlBRZ

can your shop fit a bunch of cars easily?

Originally Posted by revolutioN21

is there a set location for this and date? I have a shop in hollywood which i can consider we can work here?

nice list of parts to install on your car.
would be awesome to get it done for you!

@dgMlJDlBR @SPCorBUST well location is still not set. my garage is welcomed but only 1 car can fit at a time. but i can fit prolly 4-5 cars in my alley no problem plus i got a rascals near by with great parking or street parking.


@revolutioN21 , if you wanna offer your place to work on that would be cool as well. you say you have a shop so you have a lift access?


once my turbo comes in hopefully soon! i dont mind any of you guys coming over to lend a hand and give your 2cents since this will be my biggest project as of yet.. @FullBlown

[SPCorBUST]

Originally Posted by BRZtoni

once my turbo comes in hopefully soon! i dont mind any of you guys coming over to lend a hand and give your 2cents since this will be my biggest project as of yet.. @FullBlown

I'm happy to help. Haven't done/seen a turbo install on one of the twins yet. Want to check out your kit and rims in person too

[BRZtoni]

Originally Posted by SPCorBUST

I'm happy to help. Haven't done/seen a turbo install on one of the twins yet. Want to check out your kit and rims in person too

Ill let you know

[Phil_FRS]

date and location?

[Packofcrows]

Dont forget to take pics and write a diy guide for us noobs out there! Damn i wish you guys were closer. I want to wire foglights and swap out breakpads but im too fearful of messing up...plus im physically weak... blah!

[ExxelDistributions]

The shop is 18,000 sq ft so there is a huge amount of room to fit cars. and we can use lifts also which is not a problem. just need to talk to whoever is organizing it so we can do a weekend whenever I can provide the shop.

[ZOMFGAARON]

Originally Posted by revolutioN21

The shop is 18,000 sq ft so there is a huge amount of room to fit cars. and we can use lifts also which is not a problem. just need to talk to whoever is organizing it so we can do a weekend whenever I can provide the shop.

This just got more interesting. I'm happy to lend a hand.


Sent from my iPhone using Tapatalk

[LXXXV1]

Originally Posted by Packofcrows

Dont forget to take pics and write a diy guide for us noobs out there! Damn i wish you guys were closer. I want to wire foglights and swap out breakpads but im too fearful of messing up...plus im physically weak... blah!

Lol but there are already write ups on how to change break pads and fogs though! This should definitely be easier with a second set of hands taking pics at the DIY day. Lol this is actually why I've never written a write up...too lazy to clean my hands to take pictures.

Originally Posted by revolutioN21

The shop is 18,000 sq ft so there is a huge amount of room to fit cars. and we can use lifts also which is not a problem. just need to talk to whoever is organizing it so we can do a weekend whenever I can provide the shop.

THE SHOP HAS MY VOTE!!! Lifts will make anything under the car so much easier!!!

[DGMlJDlBRZ]

Shop has my vote too.

[SPCorBUST]

Well I'm already doing the braces, but I can sit on the driveshaft, fluid, and lower control arms and trailing arms until then I guess.

[swarb]

Originally Posted by revolutioN21

The shop is 18,000 sq ft so there is a huge amount of room to fit cars. and we can use lifts also which is not a problem. just need to talk to whoever is organizing it so we can do a weekend whenever I can provide the shop.

Talk to the shop. Get a date. Post an address/time. Not much organizing as you will get a bunch of people showing up either way.

[LXXXV1]

Here was my DIY for the weekend...4 hours to tuck the wires...

Passenger side was much quicker after I learned on the driver side. No exposed wires!

My footwells/courtesy lights are wired to the dome, so they turn on when the door is open or when the lights are on.

[BRZtoni]

Originally Posted by LXXXV1

Here was my DIY for the weekend...4 hours to tuck the wires...

Passenger side was much quicker after I learned on the driver side. No exposed wires!

My footwells/courtesy lights are wired to the dome, so they turn on when the door is open or when the lights are on.

Looks really good links to.website u purchased bulb and assembly.
I got all wiring alrdy haha

[LXXXV1]

BRZtoni

http://www.ebay.com/itm/271209962172...%3AMEBIDX%3AIT

$20, free shipping, and located in OC! Came in 2 days!

I'm also working on a DIY write up...I didn't take good pictures because my fingers hurt from shoving the wires in but I'll have my brother take good pictures when I install his. I'll probably wait until one the DIY days to do it so everyone can watch. I'm pretty confident I can do it much quicker after my install. Passenger side only took half the time of the driver side!