black buttons????

[Nikkojoe]

Usual process for amayama is they give you a quote on the parts (ie. if the parts are available or have short delays) and a cost for postage (usually around 24-48hr turn around time). Once paid for and cleared (up to 48hrs wait again) it will become in progress. In Australia they seem to send to one location then distribute to you after that using local postage methods. Once the parts have landed in Australia you are given a tracking number and the parts are marked as shipped.

I've done about half a dozen transactions so far and most have taken 3-4weeks to complete. Currently have the lower rear spoiler on the 86 aero on order (inquiry placed on the 17th November) and don't expect it for at least 2 more weeks. But I have no car yet (arrives in about 3-4weeks) so it doesn't matter

[Nikkojoe]

Originally Posted by 86 FRS

oh nice this is cheaper. did somebody already order on this site?

is the door lever the one u use to open the door? lol i dont know which one haha

It's the lever you use to open the door from the inside . It includes the lock button too from memory.

[jazztennor]

Shifter surround (MT AND AT seem the same - RHD=LHD ) - JDM G/RC
http://www.amayama.com/search/?q=su00303190

A/C vent Bezel (RHD=LHD)- JDM G/RC
http://www.amayama.com/search/?q=su00301915

LHD Black Radio Facia
Middle piece
http://www.amayama.com/search/?q=su00301910
RHS piece
http://www.amayama.com/search/?q=su00301932

Steering wheel Black trim insert -JDM G/RC
http://www.amayama.com/search/?q=su00304253

Door Lever Black (LHD=RHD) - JDM G/RC
RH
http://www.amayama.com/search/?q=su00301562
LH
http://www.amayama.com/search/?q=su00301563

Door Handle Cover (LHD=RHD) - JDM G/RC
RH
http://www.amayama.com/search/?q=su00303270
LH
http://www.amayama.com/search/?q=su00303271



Do you know if these are all the right part numbers for the black interior pieces?????

[RazBRZ]

This is exactly what I was looking for. I already painted the dash insert black and was trying to figure out how to get past the issue of the buttons without losing the lettering.
I think I'll end up ordering the buttons and the door handles and continue on painting the shift surround and steering wheel piece. At least the FR-S came with a decent dash insert, the BRZ was all silver(first thing I changed on the car).

[Sutty]

Ordered and paid for a gear shift switch assembly, expecting delivery 1st week in Jan. excellent postage rates - only $14 to Australia.

[RazBRZ]

Originally Posted by Sutty

Ordered and paid for a gear shift switch assembly, expecting delivery 1st week in Jan. excellent postage rates - only $14 to Australia.

Sweet. Please post updates and let us know how they fit. I am going to wait for the moment

[Sutty]

Originally Posted by RazBRZ

Sweet. Please post updates and let us know how they fit. I am going to wait for the moment

Will do

[Nikkojoe]

Originally Posted by jazztennor

Shifter surround (MT AND AT seem the same - RHD=LHD ) - JDM G/RC
http://www.amayama.com/search/?q=su00303190

A/C vent Bezel (RHD=LHD)- JDM G/RC
http://www.amayama.com/search/?q=su00301915

LHD Black Radio Facia
Middle piece
http://www.amayama.com/search/?q=su00301910
RHS piece
http://www.amayama.com/search/?q=su00301932

Steering wheel Black trim insert -JDM G/RC
http://www.amayama.com/search/?q=su00304253

Door Lever Black (LHD=RHD) - JDM G/RC
RH
http://www.amayama.com/search/?q=su00301562
LH
http://www.amayama.com/search/?q=su00301563

Door Handle Cover (LHD=RHD) - JDM G/RC
RH
http://www.amayama.com/search/?q=su00303270
LH
http://www.amayama.com/search/?q=su00303271



Do you know if these are all the right part numbers for the black interior pieces?????

I reversed searched it (using USA/Canada, Europe and Japan) and it came up with correct description of what it was for either RC/G trim or low spec/grade for other regions. The door handles/levers are significantly cheaper than the standard chrome ones which would point to it being just black plastic. The plain black radio trim surround is also cheaper than the standard one on the FRS and is stated as being for a BASE FRS in USA/Canada (The actual trim level on most things FRS is stated as HIGH GRADE - Bar seats, a/c control and lights etc) or for a 86/GT86 Low Grade for Europe.

The most important thing to note is that when searching for these parts it does not tell you what colour they are (except in the case of seats and fabric as there are plenty of colour combos out there). You need to research and know what model to look for to get these parts.

[Sutty]

Received an email today, my switches have been posted to me, no eta yet, but hoping they have arrived when I get back from japan in the new year.

[jazztennor]

Update with some carbon work

[86 FRS]

Originally Posted by jazztennor

Update with some carbon work

wow. so where did u order those black buttons? how hard to install?

[Juanito08]

Originally Posted by Nikkojoe

It's the lever you use to open the door from the inside . It includes the lock button too from memory.

Don't mean to thread jack, but would it be possible for you to get a part number for the fog light bezels?

[Nikkojoe]

Originally Posted by Juanito08

Don't mean to thread jack, but would it be possible for you to get a part number for the fog light bezels?

RH Fog light cover - SU00301518
http://www.amayama.com/search/?q=su00301518

LH Fog light cover - SU00301519
http://www.amayama.com/search/?q=su00301519

[Juanito08]

Originally Posted by Nikkojoe

RH Fog light cover - [COLOR=#
066cc]SU00301518[/COLOR]
http://www.amayama.com/search/?q=su00301518

LH Fog light cover - SU00301519
http://www.amayama.com/search/?q=su00301519

Thank you!!! Can peaple from the US order from this website? Or can I take the part numbers to my local toyota?

These are the bezels like these correct? But Oem?
http://image.nengun.com/catalogue/or...rior_parts.jpg