Scratches and scrape

[alone1i]

Originally Posted by RToyo86

It could be you've just grown accustomed to it.

What coating did you apply?
Most of your gloss comes from polishing the paint. Coatings and sealants do add gloss, but it's more the cherry on top.

I have done this one-

https://durasealprotection.co.nz/

[CB750F]

Originally Posted by RToyo86

If the spots appeared after it was coated give opti-coat MDR a try.(if it even bothers you) You can also clay and use iron remover on your coating, kind of unique to opti-coat. You can combo Optimum ferrex with a clay mit if you ever feel the need. Generally not required but I've seen it done by a FT86 local club member who is a certified opti-coat installer.


Consider hyper-seal once you use up your opti seal. It's a newer formula designed for coatings, specially opti-coat.
I've been using it with Optimums consumer coating gloss coat. The coating isn't all that durable but with hyper-seal on-top it still seems to be holding up pretty well on its second winter.
Like opti-seal my bottle of hyper-seal lasts forever.

I clayed the car.
I believe the shop left the water spots under the clearcoat.