DIY - Fog Light Powered with Factory Stalk and BCM - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

OICU812 · 04-11-2013, 02:11 AM

Quote:

Originally Posted by Apocalypso

@nigel-jdmparts @Carson Toyota

Would either of you fellas able to dig up this harness for us?

+1 plug n play I'd be in 100%!!!!!

Retro86 · 04-11-2013, 03:20 AM

Quote:

Originally Posted by FRSFirestorm

I grounded here at a factory ground point. You can see 3 (with fog ground) in the picture. This is looking down into the engine compartment. The yellow part is the oil fill tube. There is another ground point directly accross the bay for the passenger side.

From the pictures it looks like there is a ground wire in the connectors for the turn signals. A possiblility. The black wires have to be grounds.

i wasnt sure if it was the ground cause i disconnected the black wire and the signal still lit but it didnt flash when i turned the turn-signal, thats why i just grounded mine like that in the pic. dont wanna short anythin up.

kmbkk · 04-11-2013, 07:58 AM

Quote:

Originally Posted by OmarGC

I got that much but which side is red/white and which side is white/red... It only refers to the driver side. Re-read it and you'll see what I mean...

The drivers side is the red/white wire & the passenger's side is the white/red wire. It'll be obvious once you look at the connectors. There are 4 wires going into it and only 3 coming out of it. The empty slot is the fog wiring. You can with tap into the wire before the connector or add a wire on the other side.

OmarGC · 04-11-2013, 08:07 AM

Well Im out the country for work and can't look myself, lol

kmbkk · 04-11-2013, 03:45 PM

Sorry about that! I'd you look at the pics i out in this link, hopefully it'll make a little more sense:

http://www.ft86club.com/forums/showt...=29263&page=11

jcat5150 · 04-13-2013, 02:40 AM

Is this the harness we need? Finger on the trigger .......

Willsonk · 04-13-2013, 05:08 AM

Quote:

Originally Posted by jcat5150

Is this the harness we need? Finger on the trigger .......

What you got there jcat5150?????? Got a link to that part????

zooki · 04-13-2013, 09:11 AM

Quote:

Originally Posted by Willsonk

What you got there jcat5150?????? Got a link to that part????

I second that! Part number? I guess the other side would have the red w/white stripe wire in it?

tonystewart · 04-13-2013, 09:51 AM

Nice

norm24 · 04-13-2013, 10:31 AM

Quote:

Originally Posted by jcat5150

Is this the harness we need? Finger on the trigger .......

Looks like those guys at Hokori Motors replied to your inquiry too eh? I replied back asking for how much it'd cost to ship to Canada/US and I'll be posting their response.

However, the entire fog light kit costs $780. Assuming they'd sell the bezels for 30 each, fog light housing for 150 each and the stalk for 200, that's 560, which means the harness is 220 (even with over priced individual pieces). I feel like they'd price it at 50 bucks a pop, at least!

Retro86 · 04-13-2013, 10:38 AM

Quote:

Originally Posted by jcat5150

Is this the harness we need? Finger on the trigger .......

nope because theres suppose to be 3 wires going to the turn signal. but the beauty of this thing is that you can disassemble that connector at the end and take the female pin out and put it in your stock connector as shown here....

http://www.ft86club.com/forums/showt...=29263&page=12

jcat5150 · 04-13-2013, 03:35 PM

Hello,

Yes I messaged Hokori. They didn't provide a part number. I asked for pricing on 5 sets (10 harnesses) to try and take care of some other forum members. The price seems steep, but then again its JDM @ 76.60 shipped to CA. ~11 days ship to door. The breakdown is $61.10 for the harness and the rest shipping.

Maybe we could work with them to get a group buy? Either way I am pretty impatient and just got my FedEx box with the Subaru fogs 5 minutes ago so I may just order them. @Nigel maybe he can get the harnesses to bring the costs down.

I put my Subaru stalk in yesterday so I am chomping at the bit to do a clean OEM style install. They are on Japanese time so responses come late at night. I will probably order these tonight.

norm24 · 04-13-2013, 06:39 PM

So they replied to me as well. $111.50 shipped to Canada LOL! I wouldn't even pay 30 for the pair.

Well anyway, I did as Retro86 did and modified the connector by adding the fourth pin. Beautiful install and didn't cost me a cent.

jcat5150 · 04-13-2013, 06:54 PM

Where did you get the 4th pin? I think I will have to go to the wrecker. I cant find one to fit.

04-11-2013, 08:07 AM	#46
OmarGC My FR-S has 5 gears Join Date: Aug 2012 Drives: FRS/280z/Tundra Location: St. Louis Posts: 1,994 Thanks: 626 Thanked 1,065 Times in 572 Posts Mentioned: 49 Post(s) Tagged: 3 Thread(s)	Well Im out the country for work and can't look myself, lol __________________ Omar GC 2JZ - 6870 - stock block - 1000whp? Instagram: 2jzus

04-13-2013, 02:40 AM	#48
jcat5150 Member Join Date: Mar 2013 Drives: FR-S Location: NorCal Posts: 47 Thanks: 2 Thanked 15 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Is this the harness we need? Finger on the trigger ....... Attached Images

04-13-2013, 09:51 AM	#51
tonystewart Senior Member Join Date: May 2012 Drives: 2013 Scion FR-S Raven Location: Lake Worth Florida Posts: 1,182 Thanks: 76 Thanked 373 Times in 253 Posts Mentioned: 13 Post(s) Tagged: 1 Thread(s)	Nice __________________ May'12 AT Raven, OFT V2, Perrin IntakeTube, Pulley & Overpipe,HKS Snorkel,FA20 EL Header,Nameless Frontpipe w/ Helmholtz, Crawford AOS, Cusco O2W Cooler, Grimmspeed Strut/MC Brace, Winjets w/D2S 3.0 HID by Illuminating Lighworkx, Fogs w/EU Stalk, LED's, JDM UnderPanels, Diffuser, Rigid Collars, Whiteline, HVT Camber Plates, Koni's, Swift Springs, GTSpec LCA, SPC Toearms, DBA 4K T-Slot Rotors, Ferodo DS2500, Vorshlag BrakeLines, MichelinPSS, 5Axis Wing, Raammat, Ensolite, JPM Coachworks, OEM+Ref400, 20mmspacers, TOMS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FRS fogs using BRZ stalk	Sco2355	DIY (Do-It-Yourself) Guides	378	12-16-2018 06:17 AM
Factory shift light/chime	Wonderbar	Electronics \| Audio \| NAV \| Infotainment	29	04-05-2013 04:30 PM
Manual shifter stalk thread dimensions for knobs	bcj	Scion FR-S / Toyota 86 GT86 General Forum	1	03-19-2013 07:42 AM
SEAT BELT STALK COVERS	cslntuee	Cosmetic Modification (Interior/Exterior/Lighting)	1	03-01-2013 01:57 PM
FRS fogs using BRZ stalk	Sco2355	Cosmetic Modification (Interior/Exterior/Lighting)	0	02-18-2013 02:51 PM

04-11-2013, 03:45 PM	#47
kmbkk First 86 Driver Baby! Join Date: Jan 2012 Drives: FR-S, Flex Location: Williamsburg, VA Posts: 1,760 Thanks: 520 Thanked 525 Times in 356 Posts Mentioned: 32 Post(s) Tagged: 3 Thread(s)	Sorry about that! I'd you look at the pics i out in this link, hopefully it'll make a little more sense: http://www.ft86club.com/forums/showt...=29263&page=11

04-13-2013, 03:35 PM	#54
jcat5150 Member Join Date: Mar 2013 Drives: FR-S Location: NorCal Posts: 47 Thanks: 2 Thanked 15 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Hello, Yes I messaged Hokori. They didn't provide a part number. I asked for pricing on 5 sets (10 harnesses) to try and take care of some other forum members. The price seems steep, but then again its JDM @ 76.60 shipped to CA. ~11 days ship to door. The breakdown is $61.10 for the harness and the rest shipping. Maybe we could work with them to get a group buy? Either way I am pretty impatient and just got my FedEx box with the Subaru fogs 5 minutes ago so I may just order them. @Nigel maybe he can get the harnesses to bring the costs down. I put my Subaru stalk in yesterday so I am chomping at the bit to do a clean OEM style install. They are on Japanese time so responses come late at night. I will probably order these tonight.

04-13-2013, 06:39 PM	#55
norm24 Senior Member Join Date: Apr 2012 Drives: TSX Location: Coquitlam, BC Posts: 162 Thanks: 27 Thanked 74 Times in 42 Posts Mentioned: 2 Post(s) Tagged: 0 Thread(s)	So they replied to me as well. $111.50 shipped to Canada LOL! I wouldn't even pay 30 for the pair. Well anyway, I did as Retro86 did and modified the connector by adding the fourth pin. Beautiful install and didn't cost me a cent.

04-13-2013, 06:54 PM	#56
jcat5150 Member Join Date: Mar 2013 Drives: FR-S Location: NorCal Posts: 47 Thanks: 2 Thanked 15 Times in 10 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Where did you get the 4th pin? I think I will have to go to the wrecker. I cant find one to fit.

User Name		Remember Me?
Password