Innovate Motorsports Intercooler System and Upgrade! - Page 4 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

cruizin01 · 10-21-2013, 07:29 AM

Quote:

Originally Posted by sw20kosh

Delicious Tuning released preliminary dyno's that showed just the cooling effect of the intercooler kit. I believe it was +10 hp from just that.

Then he added timing on top of that and gained +13 hp.

Found it:

http://www.ft86club.com/forums/showp...postcount=1413

thanks for that. I missed that info somehow. Im guessing the numbers spread even further apart once back to back pulls are done or on the street where the heat exchanger gets more air.

xjohnx · 10-21-2013, 06:43 PM

which of you vendors can get me this the quickest? lol

CSG David · 10-21-2013, 06:59 PM

Quote:

Originally Posted by xjohnx

which of you vendors can get me this the quickest? lol

Where are you located?

xjohnx · 10-21-2013, 07:00 PM

Quote:

Originally Posted by CSG David

Where are you located?

Richmond, VA 23229

xjohnx · 10-21-2013, 08:49 PM

@Innovate Motorsports @mines13 - do you have intercooler upgrade installation docs yet so i can see what all is involved with the upgrade install?

utekineir · 10-21-2013, 09:25 PM

Quote:

Originally Posted by xjohnx

@Innovate Motorsports @mines13 - do you have intercooler upgrade installation docs yet so i can see what all is involved with the upgrade install?

the upgrade kit manual has been on the sprintex site for a month or more,

http://www.sprintex.com.au/sprintex/...s-Rev-1-01.pdf

http://www.sprintex.com.au/sprintex/manuals/

Ross · 10-21-2013, 09:25 PM

The spintex / bullet instructions are available on line and many of the parts are very similar, some may be the exact same. The install is not very difficult at all.

xjohnx · 10-21-2013, 09:47 PM

Quote:

Originally Posted by utekineir

the upgrade kit manual has been on the sprintex site for a month or more,

http://www.sprintex.com.au/sprintex/...s-Rev-1-01.pdf

http://www.sprintex.com.au/sprintex/manuals/

Thanks, didn't think to check there. I figured that innovate would documentation since they're selling it now.

sw20kosh · 10-21-2013, 10:44 PM

Quote:

Originally Posted by xjohnx

which of you vendors can get me this the quickest? lol

Got a track day or something?

Ryan86 · 10-21-2013, 11:33 PM

Quote:

Originally Posted by Unicorn

Dear Calum,

There's some 'strange shit' going on with all the intercooler jive. Sprintex released their charge cooler kit with a Bosch 2.5 bar MAP sensor. This MAP sensor also had an integrated air temperature sensor. This sensor has the same linearisation curve as the temp sensor in the OE MAF sensor (Unicorn Tested (tm)). For some reason Sprintex didn't want to, or be smart enough, to do a one-wire change to enable usage of this on-a-plate feature. Unicorn spec does.

Rumour on the rainbow has it that Sprintex have stopped supplying the 2.5 bar MAP sensor and are recommending use of the OE sensor. This may or may not be due to strategy issues in the ECU.

Who knows what Innovate are doing.

Yours knowingly,
Unicorn

Just found this out the hard way. 2.5 Bosch sensor supplied with the kit is a waste of money, caused endless problems while trying to tune. Fitted the OE sensor back on, tuning could be done and car running smooth.
Fitted the IAT sensor with OE map sensor, no problems identified, sent in logs to the tuner to check.

One thing that does concern me with the Intercooled version, Is the power only seems to start kicking in properly from around 4500rpm, where I notice from the non IC it starts from 2500rpm.
Is this something Only I'm expiriencing?

evo4g63 · 10-21-2013, 11:48 PM

I have no issues forking over the cash for this upgrade. I am a bit skeptical until I see actual members running this IC. As much as I'd like to be one of the first to get this I will sit back for a few and see what happens.

KSpider · 10-21-2013, 11:50 PM

Mine ships friday. I have to wait for it to go to iowa then back to me in ca, but once installed ill dyno and post numbers.

Unicorn · 10-22-2013, 12:50 AM

Quote:

Originally Posted by Ryan86

One thing that does concern me with the Intercooled version, Is the power only seems to start kicking in properly from around 4500rpm, where I notice from the non IC it starts from 2500rpm.
Is this something Only I'm expiriencing?

Dear Ryan86,

I think this will come down to your tune. Boost on the rainbow starts around 2000rpm.

Yours sincerely,
Unicorn

KSpider · 10-22-2013, 12:52 AM

Quote:

Originally Posted by xjohnx

Richmond, VA 23229

Go Spiders!

10-21-2013, 11:48 PM	#53
evo4g63 Senior Member Join Date: Jan 2013 Drives: 2016 Subaru WRX Location: Phoenix, AZ Posts: 979 Thanks: 235 Thanked 329 Times in 231 Posts Mentioned: 33 Post(s) Tagged: 0 Thread(s)	I have no issues forking over the cash for this upgrade. I am a bit skeptical until I see actual members running this IC. As much as I'd like to be one of the first to get this I will sit back for a few and see what happens. __________________ -2016 Subaru WRX -2013 Scion FR-S: Wastegated Vortech V3'd, E85 SOLD

10-21-2013, 11:50 PM	#54
KSpider Senior Member Join Date: Sep 2013 Drives: '14 S4 Location: San Marcos, CA Posts: 267 Thanks: 58 Thanked 93 Times in 54 Posts Mentioned: 4 Post(s) Tagged: 0 Thread(s)	Mine ships friday. I have to wait for it to go to iowa then back to me in ca, but once installed ill dyno and post numbers. __________________ 2014 Audi S4 · 2010 xTerra Off-Road · 2014 Fiat 500e Last edited by KSpider; 10-22-2013 at 12:00 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Innovate Motorsports Twin Screw Supercharger System, NOW SHIPPING!	Innovate Motorsports	Forced Induction	577	10-15-2014 12:49 AM
Innovate Motorsports BRZ/FR-S/GT86 Supercharger System Available from Moto-East!	Xero-Limit	Forced Induction	12	03-10-2014 08:56 PM
Innovate Motorsports FR-S/BRZ traction control state modifier module...	mines13	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	20	09-13-2013 01:06 PM
Innovate Motorsports Twin Screw Supercharger Kit for FR-S/BRZ	Innovate Motorsports	Forced Induction	1987	03-13-2013 09:14 PM
FS: Innovate Motorsports OT-2	pixel67	Engine, Exhaust, Bolt-Ons	0	01-05-2013 10:13 AM

10-21-2013, 06:43 PM	#44
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,716 Times in 1,031 Posts Mentioned: 45 Post(s) Tagged: 3 Thread(s)	which of you vendors can get me this the quickest? lol

10-21-2013, 08:49 PM	#47
xjohnx Grip>Slip Join Date: Jun 2012 Drives: 13 SWP BRZ Ltd - Innovate Powered! Location: RVA Posts: 3,563 Thanks: 656 Thanked 1,716 Times in 1,031 Posts Mentioned: 45 Post(s) Tagged: 3 Thread(s)	@Innovate Motorsports @mines13 - do you have intercooler upgrade installation docs yet so i can see what all is involved with the upgrade install?

10-21-2013, 09:25 PM	#49
Ross Senior Member Join Date: Jun 2013 Drives: 85 corolla gts Location: Chesapeake , Va Posts: 361 Thanks: 17 Thanked 177 Times in 110 Posts Mentioned: 26 Post(s) Tagged: 0 Thread(s)	The spintex / bullet instructions are available on line and many of the parts are very similar, some may be the exact same. The install is not very difficult at all.

User Name		Remember Me?
Password