LOOKING FOR A GOOD TURBOCHARGER

[r3myx626]

Originally Posted by CSG Mike

Whatever my EBC is commanding. 100% stock bottom end.

I have no idea what the exact specs are; it's the 18G provided with the GReddy T518Z kit.

I don't recommend doing this; you WILL bend rods if you try to make big power that low. This was purely an exercise to see how low in the RPM band we could get the turbo to make full commanded boost, and done with extreme caution and supervision.

Hey Mike who is your tuner? Is your car Dyno tuned?

[CSG Mike]

Originally Posted by r3myx626

Hey Mike who is your tuner? Is your car Dyno tuned?

Base dyno tune done by William Knose at DT. All the fine tuning and revisions done by Zach Tucker who is no longer at DT.

[r3myx626]

Originally Posted by CSG Mike

Base dyno tune done by William Knose at DT. All the fine tuning and revisions done by Zach Tucker who is no longer at DT.

Any idea if Zach is still tuning elsewhere? My current etune is fine but I'm considering going elsewhere with planned upgrades and I was looking at DT etune or local shop Dyno tune.

[CSG Mike]

Originally Posted by r3myx626

Any idea if Zach is still tuning elsewhere? My current etune is fine but I'm considering going elsewhere with planned upgrades and I was looking at DT etune or local shop Dyno tune.

Bill (founder/owner) has taken over all tuning duties at DT.