OFT not reading MAF volts

[Hyperblue302]

Originally Posted by Dru670

Just want let you know that Shiv sent me a stg 2 91 uel f00c rom to test if the OFT reads the MAFv and IAM. After flashing this I am happy to say that the OFT does report MAFv and IAM and FLKC (btw flkc used to report mostly -5. but now it is at "0" most of the time) And as he requested, I did somde some 2k-7.5k WOT 3rd gears pulls and sent him the logs.
here are my logs from the pulls after this flash

http://www.datazap.me/u/dru670/stg-2...data=1-2-12-13

this is what I was getting with the OTS Stg 2 91 UEL prior

http://www.datazap.me/u/dru670/ots-s...d?log=0&data=1

Awesome, I look forward to the fixes for the other tunes then!

[neilvosko]

Same issue here on a 2016 BRZ F00C cal id

please help

Originally Posted by Dru670

Here is the OTS Stg2 91 UEL F00C that I use from the latest OTS v2.076 off the website. I checked the older OTS v2.072 and OTS v2.074 and the dates on this one .bin are all dated 9/21/2015 and in the release notes

"9/22/15
v2.069
-Added Flat-foot-Shift (FFS) and Launch Control (LC) functionality to all 6MT F00C ROMs.
-Added revised XML file (with FFS and LC defined) for F00C Calibration ID."

I double checked my old logs and it appears i've been running -5 FLKC the whole time since I bought and flashed with the OTS map and that is almost 2 months now. I'm really hoping im not destroying my motor. My car is only 6 months old from the dealership damn lol

[neilvosko]

does anybody know if this issue is solved (MY16 not reading MAF voltage, IAM, etc) with OTS 4.0 roms recently released ?

[steve99]

Originally Posted by neilvosko

does anybody know if this issue is solved (MY16 not reading MAF voltage, IAM, etc) with OTS 4.0 roms recently released ?

Yes will work on v4 as they are based on A01G or I rom which logging works fine