Minnesota Check In

[KevinK121]

Originally Posted by Vic91

we should organize one!lets meet up!shoutout to all Minnesota 86 owners here!

We can try to get something organized for next season

[KevinK121]

And then there were three. Wanna give a ride along during the open lapping Faber? So I can copy your lines? Lol

[ka-t_240]

Originally Posted by TMF

MNSubiez on Facebook is a complete shi*t show if you ask me. It seems like every other post is, "I have this check engine light. What's wrong with my car? Is it ok to drive it?" Gets tiring.

I think the MNSubaru crowd is a hair more mature(?) and intelligent...just don't ask about stancing your car lol.

My car idles funny, and i put gas out of a green hose yesterday.... why doesn't it work??

[ka-t_240]

Originally Posted by KevinK121

Not really, no. I was debating starting a MN 86 group.

Actually, I think most of these folks are from the Dakotas too lol

Gopherboy
JDMNguyen
K-at

... All Dakota guys heh heh

pfffff.... I got them MN plates

[ka-t_240]

Originally Posted by KevinK121

Noted in green

My street pads are HP+ I have 2 full sets. Not corrosive.


The currently have 11k on them, around 18 days of autox, and 7 HPDEs. Fronts are around 1/3 left and rears are over half.


Yes, they are dusty, but never had any issues with "rust" and the brake dust comes off pretty easy. I normally will clean the wheels off pretty good every couple weeks or after an event.




Now.... The Hawk DTC line... those are really dusty, and corrosive and if the dust gets wet... FML

[KevinK121]

Originally Posted by ka-t_240

pfffff.... I got them MN plates

Lol my bad. You're always racing all over the midwest. Hard to get an idea of where you park that thing haha

[KevinK121]

Originally Posted by ka-t_240

My street pads are HP+ I have 2 full sets. Not corrosive.


The currently have 11k on them, around 18 days of autox, and 7 HPDEs. Fronts are around 1/3 left and rears are over half.


Yes, they are dusty, but never had any issues with "rust" and the brake dust comes off pretty easy. I normally will clean the wheels off pretty good every couple weeks or after an event.




Now.... The Hawk DTC line... those are really dusty, and corrosive and if the dust gets wet... FML

Hmm good info.

[jdnguyen]

I'm going to be faster than Faber at DCTC because I cheat


Sent from my iPhone using Tapatalk

[KevinK121]

Then maybe I should be learning your lines lol

[ka-t_240]

Originally Posted by KevinK121

Hmm good info.

I like the HP+ better then the DS2500, thats what I ran in my STI. They were dusty and noisy, but slightly less than the HP+.


I have the DTC60s in my car for the time being.

[ka-t_240]

Originally Posted by jdnguyen

I'm going to be faster than Faber at DCTC because I cheat


Sent from my iPhone using Tapatalk

Originally Posted by KevinK121

Then maybe I should be learning your lines lol

He probably means by taking lines similar to that one lap you had near turn 2-3

[jdnguyen]

I'm just going to copy my gf's line


Sent from my iPhone using Tapatalk

[redlined600]

Originally Posted by ka-t_240

I like the HP+ better then the DS2500, thats what I ran in my STI. They were dusty and noisy, but slightly less than the HP+.


I have the DTC60s in my car for the time being.

I'll take the DTC-60s if you don't want them. I really can't believe you guys aren't fading HP+ pads.

[Vic91]

Originally Posted by KevinK121

And then there were three. Wanna give a ride along during the open lapping Faber? So I can copy your lines? Lol

actually we're four i have a friend with red scion lol