Visconti Tuning - Latest BRZ Flash Info - Page 231 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

CharlieChaos · 10-24-2012, 02:13 PM

Quote:

Originally Posted by cnk

1.07 is the current version.

Sorry shouldnt have been vague the correct tune file is

RR-10826

Just want to make sure before I get home and do everything.

Also no need for a special tune with a cranky pulley correct?

cnk · 10-24-2012, 02:35 PM

Actually the latest tune that I have is RR-10895. There is no custom tune for a crank pulley that I'm aware of. John has some for different intakes, but he mentioned above that he's still tweaking them.

CharlieChaos · 10-24-2012, 02:44 PM

Quote:

Originally Posted by cnk

Actually the latest tune that I have is RR-10895. There is no custom tune for a crank pulley that I'm aware of. John has some for different intakes, but he mentioned above that he's still tweaking them.

Ok I just wanted to make sure the last tune I got was correct which seems like it isnt. Just wanted to check here and not bother john

xjohnx · 10-24-2012, 02:54 PM

Quote:

Originally Posted by cnk

Actually the latest tune that I have is RR-10895. There is no custom tune for a crank pulley that I'm aware of. John has some for different intakes, but he mentioned above that he's still tweaking them.

http://www.ft86club.com/forums/showp...postcount=3023

Visconti · 10-24-2012, 03:14 PM

Quote:

Originally Posted by Visconti

Yes this is the latest pumpgas 6spd tune

Send me a datalog and I'll tweak it for that intake .

Let me decode this for you.

------------------------------------------------------

RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M-6AC54

Means RACE ROM.

------------------------------------------------------------

RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M-6AC54

RACE ROM Version

------------------------------------------------------------

RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M-6AC54

ROM ID.

'J700' is the ROM Revision.

C Stands for 6SPD US
D Stands for AUTO US
G Stands for 6SPD EURO

------------------------------------------------------------

RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M-6AC54

Which tune you have.. including the revision number.

v1.07 = Final Release

v1.07b1 = Beta version 1.

------------------------------------------------------------

RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M-6AC54

Fuel Economy Display - Metric Mode
Fuel Economy Display - America Mode
Fuel Economy Display - British Mode

------------------------------------------------------------

RR-10895-ZA1J700C-STG1 STOCK INTAKE v1.07 FED-M-6AC54

Your EcuTek Dongle ID.

Yup...

Sorry guys been on GTR stuff all day.

BRZ will get love tonight.

John

xjohnx · 10-24-2012, 03:15 PM

Quote:

Originally Posted by Visconti

BRZ will get love tonight.

John

Giggidy-giggidy-goo!

tripjammer · 10-24-2012, 04:22 PM

John u da man!!!!

Laika · 10-24-2012, 05:01 PM

I would have called or emailed if I were actually concerned but....

John- Any word on my "license=0" issue from ecutek?

uspspro · 10-24-2012, 05:20 PM

Quote:

Originally Posted by brichard0625

So with the tune the chirping was not there and now that you went back to stock the chirping came back?

I'm guessing the raised idle from the tune is reducing the chirp.

SkAsphalt · 10-24-2012, 05:57 PM

I feel bad, I finally got the tune from john but I typed in the number on my fob wrong. So i re-filled out the form and hopefully got it right this time (I was working off of a photo I took of the USB key, so it was blury) but really, it is hard to tell the 0 or O apart, and when blurry, it looked like a D. So yeah, I am a failure.

Also I don't seem to have a license.

For everyone who has flashed, is the license stored on the USB key or do you get it in an email from john initially? I mentioned not having one in the form also. So he will see it when he has time.

Yruyur · 10-24-2012, 06:04 PM

Just ordered the e85 and filled out the form. Will be running on fumes until I get the tune.

Sent from my SCH-I535 using Tapatalk 2

Calum · 10-24-2012, 06:26 PM

Quote:

Originally Posted by SkAsphalt

I feel bad, I finally got the tune from john but I typed in the number on my fob wrong. So i re-filled out the form and hopefully got it right this time (I was working off of a photo I took of the USB key, so it was blury) but really, it is hard to tell the 0 or O apart, and when blurry, it looked like a D. So yeah, I am a failure.

Also I don't seem to have a license.

For everyone who has flashed, is the license stored on the USB key or do you get it in an email from john initially? I mentioned not having one in the form also. So he will see it when he has time.

It's in the USB key.

As for special tunes for a crank pulley, they don't effect air fuel ratios, scavenging or anything else like that. So a special tune is not required.

Mr.Jay · 10-24-2012, 06:35 PM

I'm going to need to fill out the forum but no rush I'll let John deal with the guys with nothing before sending one in. Maybe after winter hopefully by then all the crazyness is over with

JPxM0Dz · 10-24-2012, 07:18 PM

Quote:

Originally Posted by Mr.Jay

I'm going to need to fill out the forum but no rush I'll let John deal with the guys with nothing before sending one in. Maybe after winter hopefully by then all the crazyness is over with

Canadian cluster issue ?

10-24-2012, 05:01 PM	#3228
Laika When In Doubt... Join Date: May 2011 Drives: Slowww Location: PA215 Posts: 1,844 Thanks: 1,023 Thanked 752 Times in 412 Posts Mentioned: 20 Post(s)	I would have called or emailed if I were actually concerned but.... John- Any word on my "license=0" issue from ecutek? __________________ Join the Galaxy Blue Silica BRZ registry below: https://docs.google.com/spreadsheet/...2c&usp=sharing

10-24-2012, 05:57 PM	#3230
SkAsphalt Ridge Racerrrrrrrrr Join Date: Jul 2012 Drives: 2013 Scion FR-S, 2004 Toyota Coroll Location: Regina, Sk Posts: 3,516 Thanks: 5,786 Thanked 1,363 Times in 954 Posts Mentioned: 37 Post(s)	I feel bad, I finally got the tune from john but I typed in the number on my fob wrong. So i re-filled out the form and hopefully got it right this time (I was working off of a photo I took of the USB key, so it was blury) but really, it is hard to tell the 0 or O apart, and when blurry, it looked like a D. So yeah, I am a failure. Also I don't seem to have a license. For everyone who has flashed, is the license stored on the USB key or do you get it in an email from john initially? I mentioned not having one in the form also. So he will see it when he has time. __________________ Saskatchewan Owner's Forum

10-24-2012, 06:04 PM	#3231
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s)	Just ordered the e85 and filled out the form. Will be running on fumes until I get the tune. Sent from my SCH-I535 using Tapatalk 2 __________________

10-24-2012, 06:35 PM	#3233
Mr.Jay Senior Member Join Date: Mar 2011 Drives: FRS :D Location: Vancouver BC Posts: 2,985 Thanks: 545 Thanked 699 Times in 438 Posts Mentioned: 18 Post(s)	I'm going to need to fill out the forum but no rush I'll let John deal with the guys with nothing before sending one in. Maybe after winter hopefully by then all the crazyness is over with __________________ Out of the FRS game

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LED Front Signals with Resistor Flash Correctors	DarrenDriven	Cosmetic Modification (Interior/Exterior/Lighting)	38	09-20-2012 02:05 PM
Brz Info/Specs (helpful info for questions asked often)	Gaen	BRZ First-Gen (2012+) — General Topics	0	05-24-2012 10:09 PM
How to embed a flash gallery?	DarrenDriven	Site Announcements / Questions / Issues	2	04-24-2012 07:43 PM
Production Spec Subaru BRZ Previewed at National Conference & Latest Info/Rumors	blur	BRZ First-Gen (2012+) — General Topics	130	09-01-2011 01:42 PM

10-24-2012, 02:35 PM	#3222
cnk Senior Member Join Date: Aug 2012 Drives: '13 DGM BRZ Limited Location: NJ Posts: 1,202 Thanks: 59 Thanked 547 Times in 339 Posts Mentioned: 8 Post(s)	Actually the latest tune that I have is RR-10895. There is no custom tune for a crank pulley that I'm aware of. John has some for different intakes, but he mentioned above that he's still tweaking them.

10-24-2012, 04:22 PM	#3227
tripjammer Senior Member Join Date: Aug 2010 Drives: WRB BRZ limited 6MT Location: San Antonio, TX Posts: 2,765 Thanks: 3,109 Thanked 178 Times in 142 Posts Mentioned: 6 Post(s)	John u da man!!!!

User Name		Remember Me?
Password