Factory pioneer headunit. - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Tcoat · 01-13-2015, 12:47 PM

I understand that the Canadian HU is or at least was different then the US. Does anybody know if the 14 Canadian one is indeed different and if we might have an RCA output?
I can find zero info anywhere.

EightSix93 · 01-13-2015, 12:48 PM

I would also like to know.

Sent from my iPhone using Tapatalk

Liquidsnake · 01-13-2015, 11:27 PM

I got a bass knob installed under my steering wheel to control the bass t my 8 inch bazooka

Chimera · 01-13-2015, 11:37 PM

Quote:

Originally Posted by Tcoat

I understand that the Canadian HU is or at least was different then the US. Does anybody know if the 14 Canadian one is indeed different and if we might have an RCA output?
I can find zero info anywhere.

Tbh the hu pulls super easily. Remove trim plate, remove 4 10mm bolts, pull hu. I would just go and look. It's about a 5 to 10 min job including reassembly.

EightSix93 · 01-13-2015, 11:38 PM

Quote:

Originally Posted by Chimera

Tbh the hu pulls super easily. Remove trim plate, remove 4 10mm bolts, pull hu. I would just go and look. It's about a 5 to 10 min job including reassembly.

What about stripping the panels along the inside of the car for the wiring for the subs and amp from the trunk?

Sent from my iPhone using Tapatalk

Chimera · 01-13-2015, 11:42 PM

Quote:

Originally Posted by EightSix93

How's it sound for you and what do you have?

Sent from my iPhone using Tapatalk

I used a jl PWM110-JXWXv2 with a PAC audio in line gain knob. It's simple and does a very effective job with the stock setup. It's also very affordable by comparison to other.. Probably Better.. Options.

Chimera · 01-13-2015, 11:45 PM

Quote:

Originally Posted by EightSix93

What about stripping the panels along the inside of the car for the wiring for the subs and amp from the trunk?

Sent from my iPhone using Tapatalk

Also not difficult, but requires a little bit more experience.. Or time. Rear panels are a tight twisting experience. Harder to reinstall than remove.. Requires pulling some weather striping. It reinstalls easily. There are videos online.

EightSix93 · 01-13-2015, 11:45 PM

Quote:

Originally Posted by Chimera

I used a jl PWM110-JXWXv2 with a PAC audio in line gain knob. It's simple and does a very effective job with the stock setup. It's also very affordable by comparison to other.. Probably Better.. Options.

Nice. I'm sticking with my 2 12in Rockford fosgate R2s. If I can hook it up without my cleansweep it would be great

Sent from my iPhone using Tapatalk

EightSix93 · 01-13-2015, 11:46 PM

Quote:

Originally Posted by Chimera

Also not difficult, but requires a little bit more experience.. Or time. Rear panels are a tight twisting experience. Harder to reinstall than remove.. Requires pulling some weather striping. It reinstalls easily. There are videos online.

I looked around on YouTube and Google but couldn't find any video guides. If you know of any I would appreciate it if I could get a link

Sent from my iPhone using Tapatalk

Chimera · 01-13-2015, 11:48 PM

Quote:

Originally Posted by EightSix93

I looked around on YouTube and Google but couldn't find any video guides. If you know of any I would appreciate it if I could get a link

Sent from my iPhone using Tapatalk

I know for certain oem + had some tutorial videos centered around installation of their system. There are others too.

EightSix93 · 01-13-2015, 11:50 PM

Quote:

Originally Posted by Chimera

I know for certain oem + had some tutorial videos centered around installation of their system. There are others too.

Yea I saw the OEM+ video but it didn't really show anything but taking the headunit out really and that guy talking a lot. I'll figure it out doeeee

Sent from my iPhone using Tapatalk

01-13-2015, 12:47 PM	#15
Tcoat Senior Member Join Date: Jul 2014 Drives: 2020 Hakone Location: London, Ont Posts: 69,841 Thanks: 61,656 Thanked 108,294 Times in 46,456 Posts Mentioned: 2499 Post(s) Tagged: 50 Thread(s)	I understand that the Canadian HU is or at least was different then the US. Does anybody know if the 14 Canadian one is indeed different and if we might have an RCA output? I can find zero info anywhere. __________________ Racecar spelled backwards is Racecar, because Racecar.

01-13-2015, 11:27 PM	#17
Liquidsnake Senior Member Join Date: Apr 2012 Drives: "I drives like a Porsche" Location: LA Posts: 638 Thanks: 89 Thanked 245 Times in 136 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I got a bass knob installed under my steering wheel to control the bass t my 8 inch bazooka __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: OEM Pioneer Headunit & OEM Amplifier	MicheleAbbate	Audio/Visual, Electronics, Infotainment, NAV	26	05-14-2020 04:38 PM
OEM Pioneer Headunit	gatorbushmen	Audio/Visual, Electronics, Infotainment, NAV	0	11-18-2013 12:36 AM
2013 Stock Pioneer Headunit - $60	JohnAyySays	Interior Parts (Incl. Lighting)	0	08-28-2013 05:50 PM
FS: FR-S OEM Pioneer Headunit	aim1126	Audio/Visual, Electronics, Infotainment, NAV	0	05-11-2013 10:13 PM
Pioneer Bespoke HeadUnit for sale	briang0901	Audio/Visual, Electronics, Infotainment, NAV	4	11-05-2012 12:26 PM

01-13-2015, 12:48 PM	#16
EightSix93 Member Join Date: Jan 2015 Drives: 2013 FR-S. Location: Maryland Posts: 70 Thanks: 6 Thanked 13 Times in 11 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I would also like to know. Sent from my iPhone using Tapatalk

User Name		Remember Me?
Password