PAUTER ROD WITH ACL RACE BEARINGS - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Sbeezy · 08-23-2013, 01:09 AM

I like that you are taking time to learn the ins and outs of this engine! you are a pioneer Mech, are you going for mad powah this time or are you just gonna pick up from where you left off and go one step at a time?

Sbeezy · 08-23-2013, 01:15 AM

@cf6mech Or @don what happened to the gearset that was being worked on? and how big of a modification would it take to use a beastly TREMEC tranny in this car?

GC GTS Aero Kit · 08-23-2013, 03:44 AM

Don - for 400rwhp you need a built motor with these i take it

GC GTS Aero Kit · 08-23-2013, 07:36 AM

have you busted a gearbox already?

foursix86 · 08-24-2013, 05:12 AM

Quote:

Originally Posted by cf6mech

The Tremec as Don told me is a easy swap with good tunnel fitment ,...

Which Tremec are we talking about? T45, TR3650, T56?

cf6mech · 08-24-2013, 05:30 AM

Quote:

Originally Posted by GC GTS Aero Kit

have you busted a gearbox already?

No my tranny is fine at the moment,...but obviously its just a matter of time when I'm making 325ftlbs of torque and the stock transmission is rated at 210ftlbs. BTW the cost of the OEM unit is right around 6k.

cf6mech · 08-24-2013, 05:32 AM

Quote:

Originally Posted by foursix86

Which Tremec are we talking about? T45, TR3650, T56?

Don't remember which one Don said it was,...definitely not the T56 though.

lexusb3 · 08-24-2013, 09:49 AM

Quote:

Originally Posted by cf6mech

No my tranny is fine at the moment,...but obviously its just a matter of time when I'm making 325ftlbs of torque and the stock transmission is rated at 210ftlbs. BTW the cost of the OEM unit is right around 6k.

mine is still holding lol

, i work at toyota corp and you are right with that price! when you get big power i hope everyone realizes when things break its not cheap!

GC GTS Aero Kit · 08-25-2013, 05:52 AM

We should send an email to PPG in Australia to see if they are going to make a dog gearset for the car

Ross · 08-26-2013, 11:34 AM

Definitely interested in this, but I got hung up on when I called to ask about pricing and how the process of getting them was done. I am not interested in what they are doing or how they achieve the fitment (they did the leg work for that and I am ok paying to get this done). Mainly want to know If I have to order rods in a specific way, turn around time, and price. As well what measurements are required from me. Have a customer who would like to lower compression and forge there bottom end. Serious buyer here.

Don@Accelerated · 08-30-2013, 01:45 PM

Quote:

Originally Posted by kiichiro

What tremec conversion is he refering to above?

Tremec TKO Conversions I've been doing. 5 speeds make for 600+HP

Don@Accelerated · 08-30-2013, 01:46 PM

Quote:

Originally Posted by GC GTS Aero Kit

We should send an email to PPG in Australia to see if they are going to make a dog gearset for the car

Albins is already making me gearsets. PPG wanted nothing to do with anything less than a 20 pc order.

Don@Accelerated · 08-30-2013, 01:47 PM

Quote:

Originally Posted by Ross

Definitely interested in this, but I got hung up on when I called to ask about pricing and how the process of getting them was done. I am not interested in what they are doing or how they achieve the fitment (they did the leg work for that and I am ok paying to get this done). Mainly want to know If I have to order rods in a specific way, turn around time, and price. As well what measurements are required from me. Have a customer who would like to lower compression and forge there bottom end. Serious buyer here.

I have 2 sets of rods on Shelf right now. Ready for immediate shipment. If you could give me rough journal #s I can get them close enough to just measure and test on site.

Don@Accelerated · 08-30-2013, 01:48 PM

Quote:

Originally Posted by GC GTS Aero Kit

have you busted a gearbox already?

I've broken 2

08-23-2013, 03:44 AM	#17
GC GTS Aero Kit Australian and Proud !!!! Join Date: Jun 2012 Drives: 2012 Toyota 86 GTS Aero Kit Location: Gold Coast / Brisbane Posts: 565 Thanks: 92 Thanked 145 Times in 110 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	Don - for 400rwhp you need a built motor with these i take it __________________ BONKRS for life

08-23-2013, 07:36 AM	#18
GC GTS Aero Kit Australian and Proud !!!! Join Date: Jun 2012 Drives: 2012 Toyota 86 GTS Aero Kit Location: Gold Coast / Brisbane Posts: 565 Thanks: 92 Thanked 145 Times in 110 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	have you busted a gearbox already? __________________ BONKRS for life

08-25-2013, 05:52 AM	#23
GC GTS Aero Kit Australian and Proud !!!! Join Date: Jun 2012 Drives: 2012 Toyota 86 GTS Aero Kit Location: Gold Coast / Brisbane Posts: 565 Thanks: 92 Thanked 145 Times in 110 Posts Mentioned: 5 Post(s) Tagged: 0 Thread(s)	We should send an email to PPG in Australia to see if they are going to make a dog gearset for the car __________________ BONKRS for life

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
86 to Race inaugural Moder Sports Car Race	000 Racing	AUSTRALIA	4	05-23-2013 07:22 PM
Fortune Auto V4 500s W/ Roller bearings	FR-S86	Brakes, Suspension, Chassis	21	02-12-2013 04:30 PM
►► FORTUNE AUTO Coilovers 4Less ◄◄ $120 Rebate, Free Roller Bearings &Free Shipping!	CygnusPerformance.com	Brakes, Suspension, Chassis	7	02-02-2013 12:14 AM
No Race Track Seats in Race Car Drivers Every Day Cars..!!	JohnnyNight	Cosmetic Modification (Interior/Exterior/Lighting)	24	10-16-2012 05:42 PM
Toyota FT-86 to Race in VLN Race @ Nurburgring this Weekend! First Photos!	Hachiroku	Scion FR-S / Toyota 86 GT86 General Forum	329	10-16-2011 09:51 PM

08-23-2013, 01:09 AM	#15
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	I like that you are taking time to learn the ins and outs of this engine! you are a pioneer Mech, are you going for mad powah this time or are you just gonna pick up from where you left off and go one step at a time?

08-23-2013, 01:15 AM	#16
Sbeezy Senior Member Join Date: Apr 2013 Drives: 2001 ZX2, WRBP BRZ (soon hopefully) Location: Port Arthur Tx Posts: 182 Thanks: 111 Thanked 23 Times in 23 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	@cf6mech Or @don what happened to the gearset that was being worked on? and how big of a modification would it take to use a beastly TREMEC tranny in this car?

08-26-2013, 11:34 AM	#24
Ross Senior Member Join Date: Jun 2013 Drives: 85 corolla gts Location: Chesapeake , Va Posts: 361 Thanks: 17 Thanked 177 Times in 110 Posts Mentioned: 26 Post(s) Tagged: 0 Thread(s)	Definitely interested in this, but I got hung up on when I called to ask about pricing and how the process of getting them was done. I am not interested in what they are doing or how they achieve the fitment (they did the leg work for that and I am ok paying to get this done). Mainly want to know If I have to order rods in a specific way, turn around time, and price. As well what measurements are required from me. Have a customer who would like to lower compression and forge there bottom end. Serious buyer here.

User Name		Remember Me?
Password