Perrin or Invidia Catted Front Pipe?

[Sportsguy83]

Originally Posted by husker741

Man, now you guys have me really considering the Nameless. I love how it is the same price as one Perrin piece, but I have learned in the past that you get what you pay for. I also like how the V1 exhaust sounds with the invidia and Perrin pipes. Hmmm, decisions decisions. If I save that much with the Nameless, then I can get headers. Maybe Jeremy from @FT-86 SpeedFactory can chime in with his thoughts.

Nameless quality is unrivaled. You actually get more bang for your buck going with the Nameless system.

[itsfun]

Originally Posted by husker741

Just what I wanted, more options haha.

Does anyone know if I will have any CEL problems with headers and the catted downpipe?

Well the Berk is $250 while the others are $400 plus. Same 200 cell cat. Is there something I'm missing here?

[Mister_Sir]

Honestly, when I went to Nameless catted dp.. I didnt notice a difference at all as far as sound of performance, however when I went with the invidia catless, I noticed the exhaust note was more aggressive and it seemed like it helped performance a bit. I wouldnt get catted unless you run an aftermarket header.

[husker741]

Originally Posted by itsfun

Well the Berk is $250 while the others are $400 plus. Same 200 cell cat. Is there something I'm missing here?

I'm just messing. I just have so many options and I'm not sure which to go with.

[husker741]

What about this one? http://ft86speedfactory.com/agency-p...-pipe-211.html

[whataboutbob]

FWIW, I have the Nvidia N1 and catted front pipe with and aFe dry and Perrin crank pulley. Got 176WHP on the dyno @Evasivemotorports on a AT. No tune.

[husker741]

Originally Posted by whataboutbob

FWIW, I have the Nvidia N1 and catted front pipe with and aFe dry and Perrin crank pulley. Got 176WHP on the dyno @Evasivemotorports on a AT. No tune.

Any videos of the sound?

[whataboutbob]

Originally Posted by husker741

Any videos of the sound?

[ame="http://www.youtube.com/watch?v=6ESY2KC_J80"]176WHP_140FTLBSTQ_Evasive_Motorsports - YouTube[/ame]

Enjoy, I did.

[86_ZN6]

check out the works frontpipe. it's catless but sound good

[ame="http://www.youtube.com/watch?v=Fhy2X0RIq1E"]WORKS Overback Exhaust System Dyno Test - YouTube[/ame]

[Slade]

Sorry for the bump, I've been searching but I cant find any *catted* front pipes. Only catless or ones that come with a resonator. Can anybody link me? I want a front pipe but I don't want the noise that comes with a catless one, and I know I can just get one with a resonator, but I want to be as environmentally friendly as possible. Thanks.

[Teseo]

Berk
Motiv
JDL
Fujitsbo?

[churchx]

stock.

[Thedishdoc]

Originally Posted by Jared0934

Don't go catless you won't like dealing with the smell. I have a full Perrin headerback and couldn't be happier. Perrin does a lot of R&D and this isn't their first platform car in the game. Their products are solid and they stand behind them.

Can't say anything about Invidia because once I found Perrin I'm sticking to them. Quality like no other.

Wish Perrin still made their catted front pipe. It was the pipe I decided on until I found it's been discontinued. My Perrin resonated catback arrived today and I need a front pipe so when I do the install, I can knock them both out. Suggestions on good deals on catted FPs since this thread is kinnda old?

[Vital]

Originally Posted by Thedishdoc

Wish Perrin still made their catted front pipe. It was the pipe I decided on until I found it's been discontinued. My Perrin resonated catback arrived today and I need a front pipe so when I do the install, I can knock them both out. Suggestions on good deals on catted FPs since this thread is kinnda old?

Just get a Berk High Flow Cat front pipe. I have one and its not too expensive no reason to pay more for the other expensive ones they all do the same job. It will give the exhaust a nice deep tone and get a little more resonance i highly recommend it. Since you're resonated it wont give you any drone or rasp so dont worry about that.