DIY: LED "Demon Eye"

[Trashed675]

That does look pretty bad ass.

Just be careful though, i'm sure johny law man won't like it very much.

[Jesse]

very cool on a blacked out car

[F1point4]

Originally Posted by Hardrock4445

Seperate projector housing 3 phillips screws:


For painted version, paint cutoff shield (middle of picture) desired color and re-assemble from this point.


LED will sit under this "Shield"

Appreciate these photos in particular. For everyone who uses plug and play HID kits, these are the "Squirrel Finders" you must bend down or you'll blind oncoming traffic. They are designed to reflect a little bit of light up in halogen projectors to light up signs.

As everyone can see can see its very hard to get your fingers in there to bend down unless you take everything apart.

[sho220]

Originally Posted by Trashed675

That does look pretty bad ass.

Just be careful though, i'm sure johny law man won't like it very much.

That was my first thought...

[Hardrock4445]

Originally Posted by Gixxersixxerman

Might work in both day and night if you painted and led

I went led so it can be turned off, both would be awesome. But I did this mainly as an accent while the car is parked.

[JWMotoring]

I like this mod

[kmbkk]

I definitely like this mod! Props to you for doing it!

[wrohdejr]

Thinking about doing this but also seeing if i can add another blue led in there and hook it up to a 3 way switch. That way i can get a red or blue or purple effect.

[EBMCS03]

Originally Posted by wrohdejr

Thinking about doing this but also seeing if i can add another blue led in there and hook it up to a 3 way switch. That way i can get a red or blue or purple effect.

You mean you really only care for the red and blue and alternating effect right? LoL

[Lee358]

Soo you want a police brz?


Sent from my iPhone using Tapatalk

[xcelir8brz]

[ORIGINAL]

[GT/86]

That is a one Scary FR-S

[Dezoris]

As mentioned on a black car this is deadly looking. It's silly and cool at the same time.
Good work

[Hardrock4445]

Originally Posted by F1point4

Appreciate these photos in particular. For everyone who uses plug and play HID kits, these are the "Squirrel Finders" you must bend down or you'll blind oncoming traffic. They are designed to reflect a little bit of light up in halogen projectors to light up signs.

As everyone can see can see its very hard to get your fingers in there to bend down unless you take everything apart.

The "squirrel finders" in this headlight are fairly strong due to design, compared to other projectors. Would find it hard to bend without taking it apart.