Reverse lock out changed out - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

iLoveMySubi93 · 04-08-2016, 04:10 PM

Quote:

Originally Posted by Ashikabi

Does perrin use grub screws instead?

it specifically says to reuse the oem pin. idk maybe its a manufacturer defect or something. because its seriously weird the pin slides into the oem one and locks but it wont even go in on the perrin one

Ashikabi · 04-08-2016, 04:16 PM

Quote:

Originally Posted by iLoveMySubi93

it specifically says to reuse the oem pin. idk maybe its a manufacturer defect or something. because its seriously weird the pin slides into the oem one and locks but it wont even go in on the perrin one

Try squeezing it with pliers to get it started. DIY I just read said you have to tap it in with a hammer. My lockout was the same way but it's not Perrin

BRZtoni · 04-09-2016, 12:15 PM

sorry - i thought i had two but only one

tracerit · 04-09-2016, 07:32 PM

Quote:

Originally Posted by BRZtoni

sorry - i thought i had two but only one

where did you get your spare pins from?

BRZtoni · 04-09-2016, 09:44 PM

i work for a dealer

iLoveMySubi93 · 04-10-2016, 11:47 AM

i just ordered a few of them. so if it works out im more than happy to give you one or two.

tracerit · 04-10-2016, 12:37 PM

Quote:

Originally Posted by iLoveMySubi93

i just ordered a few of them. so if it works out im more than happy to give you one or two.

Which ones did you order? If they work let me know, I'm up for picking one or two from you :p

tracerit · 04-10-2016, 12:38 PM

Quote:

Originally Posted by BRZtoni

i work for a dealer

So there is a part number for thr pins? Or is it more a generic part that fits? I wasn't able to find the part on subaruparts

Norville Rogers · 04-10-2016, 01:00 PM

I'm lost on this one.

Is the reverse lock out the small piece of plastic that stops the less able selecting reverse when they didn't mean to?

Does changing out mean replacing?

Help.

tracerit · 04-10-2016, 02:04 PM

Quote:

Originally Posted by Norville Rogers

I'm lost on this one.

Is the reverse lock out the small piece of plastic that stops the less able selecting reverse when they didn't mean to?

Does changing out mean replacing?

Help.

yup, it's that plastic part. You don't need to replace the metal pin all the time. I know the Raceseng reverse lockout provides a quality threaded pin to use. Not sure about the Perrin lockout. My aliexpress lockout requires reuse of the stock pin.

Ashikabi · 04-10-2016, 02:15 PM

Quote:

Originally Posted by tracerit

yup, it's that plastic part. You don't need to replace the metal pin all the time. I know the Raceseng reverse lockout provides a quality threaded pin to use. Not sure about the Perrin lockout. My aliexpress lockout requires reuse of the stock pin.

Perrin reuses the stock pin apparently. I got my reverse lockout on eBay for $15 from Taiwan. Works fine, looks great. No reason to spend $80 on Perrin/Grimmspeed/Raceseng/etc unless you want a specific color or the name/logo on it. This part doesn't really break, people just do it for looks or feel

tracerit · 04-10-2016, 02:25 PM

Quote:

Originally Posted by Ashikabi

Perrin reuses the stock pin apparently. I got my reverse lockout on eBay for $15 from Taiwan. Works fine, looks great. No reason to spend $80 on Perrin/Grimmspeed/Raceseng/etc unless you want a specific color or the name/logo on it. This part doesn't really break, people just do it for looks or feel

I thought this to and to a certain degree, those ones are a lot more expensive. The Raceseng one has an O-ring inside that really keeps the lockout solid, there's no play in it. Just wish it didn't have such a standout logo on it (had the silver to minimize it) and that the diameter wasn't larger up top (limited some shift knobs I tried using as it wouldn't fit in).

Ashikabi · 04-10-2016, 02:29 PM

Quote:

Originally Posted by tracerit

I thought this to and to a certain degree, those ones are a lot more expensive. The Raceseng one has an O-ring inside that really keeps the lockout solid, there's no play in it. Just wish it didn't have such a standout logo on it (had the silver to minimize it) and that the diameter wasn't larger up top (limited some shift knobs I tried using as it wouldn't fit in).

Mine is polished aluminum with no logos at all

Norville Rogers · 04-11-2016, 01:59 PM

Quote:

Originally Posted by Ashikabi

Mine is polished aluminum with no logos at all

I was tempted by the eBay one to go with my team voodoo shifter. 10 minute job to fit I guess

04-09-2016, 12:15 PM	#17
BRZtoni Turbo E85 Join Date: Sep 2013 Drives: 13 wrb brz Location: torrance, ca Posts: 1,093 Thanks: 172 Thanked 555 Times in 349 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	sorry - i thought i had two but only one __________________ Flex Fuel Turbo BRZ

04-09-2016, 09:44 PM	#19
BRZtoni Turbo E85 Join Date: Sep 2013 Drives: 13 wrb brz Location: torrance, ca Posts: 1,093 Thanks: 172 Thanked 555 Times in 349 Posts Mentioned: 32 Post(s) Tagged: 0 Thread(s)	i work for a dealer __________________ Flex Fuel Turbo BRZ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Perrin WRX STI reverse lock out..NEW no box	BRZeer	Miscellaneous	2	12-18-2014 03:43 PM
Question for those who have changed the reverse lockout	AllStar0419	Cosmetic Modification (Interior/Exterior/Lighting)	5	11-04-2014 11:25 PM
Reverse lock out adjustment	nfaj	Engine, Exhaust, Transmission	10	10-03-2014 10:46 AM
Perrin Reverse Lock	BRZ615	Interior Parts (Incl. Lighting)	3	08-07-2014 02:02 AM
Reverse lock out diameter?	Moddiction	BRZ First-Gen (2012+) — General Topics	6	09-01-2012 12:04 PM

04-10-2016, 11:47 AM	#20
iLoveMySubi93 Member Join Date: May 2015 Drives: BRZ SOLD, 2017 sti, 2003 tacoma TRD Location: SoCal Posts: 81 Thanks: 2 Thanked 6 Times in 6 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	i just ordered a few of them. so if it works out im more than happy to give you one or two.

04-10-2016, 01:00 PM	#23
Norville Rogers Banned Join Date: Feb 2016 Drives: Subaru BRZ Location: U.K. Posts: 139 Thanks: 142 Thanked 238 Times in 167 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	I'm lost on this one. Is the reverse lock out the small piece of plastic that stops the less able selecting reverse when they didn't mean to? Does changing out mean replacing? Help.

User Name		Remember Me?
Password