Minnesota Check In

[FRS_ing]

Originally Posted by Hovan_BRZ

Thanks, I'll look into it. Another question, do you guys get a small rattling sound?? I believe it's from the heat shield underneath. It only happens occasionally when I'm slowing down or low rpm.

I have the same rattle(It happens when you're in neutral slowing to a stop and the rpm is around 1000). It stops if I step on the clutch or move the shifter.

[ayau]

FYI, my CE28N 17x7.5 +50 wheels are for sale. Will include the tires free of charge since they're pretty much done. They're 215/45/17 Dunlop Direzza II.

$1,200 without lug nuts.
$1,300 with Evasive extended open ended lug nuts.

[ciro]

Originally Posted by Hovan_BRZ

Sup LeeMaster.. I've seen your red BRZ once awhile back. I don't really see too many either.. There's a black FR-S rollin' around here too.. Just wondering, did any of ya'll do an opticoat or clear bra?? I be catching mad bugs on my front end... just want to protect the paint.

I'm the black one if you see me in saint paul, mpls, eden prarie areas.

[Chupacabra]

Originally Posted by ciro

I'm the black one if you see me in saint paul, mpls, eden prarie areas.

I've seen you around EP, I work there.

There's also a Firestorm FR-S nearby I've seen.

[M3GH4N]

Originally Posted by Homegrown

hahahahahaha.. It was nice meeting you. Your car looks great, the stance is awesome..

Thank you! I happened to peek as I was driving past and saw your car the other day. How long ago did you purchase yours? I should have wheels on in a month or so, so you'll have to take a look again!

[ciro]

Originally Posted by Chupacabra

I've seen you around EP, I work there.

There's also a Firestorm FR-S nearby I've seen.

I work there also where are you working? I work for Nexxt Technologies we sell 3D printers.

[Homegrown]

Originally Posted by M3GH4N

Thank you! I happened to peek as I was driving past and saw your car the other day. How long ago did you purchase yours? I should have wheels on in a month or so, so you'll have to take a look again!

I got it in March from Carlson Toyota. I will check your car out for sure, what wheels are you getting? I'll check it out for sure!!!

[Chupacabra]

Originally Posted by ciro

I work there also where are you working? I work for Nexxt Technologies we sell 3D printers.

I work at Arrow Electronics, the division I'm in distributes EMC equipment. I'm over near the Wells Fargo and Home Depot.

[ayau]

@neutron256, do you know how to check ECU calibration file with your Tech Stream device?

It looks like calibration ZA1JA01C fixes the DI seals issue. Pretty sure our cars will have the older file, but I'm just curious what our numbers are.

See this page for more info.

http://www.ft86club.com/forums/showt...=40951&page=18

[neutron256]

Originally Posted by ayau

@neutron256, do you know how to check ECU calibration file with your Tech Stream device?

It looks like calibration ZA1JA01C fixes the DI seals issue. Pretty sure our cars will have the older file, but I'm just curious what our numbers are.

See this page for more info.

http://www.ft86club.com/forums/showt...=40951&page=18

i don't know how but I'm pretty sure I can figure it out. Techstream is pretty user friendly once you get the hang of it. I'll try an check mine this weekend and see which version I have. Then I can start worrying knowing I have the old version.

[ayau]

Originally Posted by neutron256

i don't know how but I'm pretty sure I can figure it out. Techstream is pretty user friendly once you get the hang of it. I'll try an check mine this weekend and see which version I have. Then I can start worrying knowing I have the old version.

I just realized that you had a tune done, didn't you? Not sure if that changes the file name or not.

[neutron256]

Originally Posted by ayau

I just realized that you had a tune done, didn't you? Not sure if that changes the file name or not.

Mine is reflashed back to stock because I got sick of dealing with Visconti. Which version of stock I'm not sure though.

I guess I'll find out. I wonder if I can get the latest version by getting an updated tune from Visconti.

[M3GH4N]

Originally Posted by Homegrown

I got it in March from Carlson Toyota. I will check your car out for sure, what wheels are you getting? I'll check it out for sure!!!

That's where I originally went to possibly purchase a car but they low balled me on my trade in and insisted I buy their ultramarine 6speed when I told them I wanted whiteout.. Otherwise it would've taken two weeks to get a whiteout 6speed... So I contacted the guy I bought my tC from at the St. Cloud dealership and went up there two days later... He gave me a better deal on the trade in and I left with the car that day!

Anyway that was a little off topic haha... I'm not 100% sure what I'm getting but I'm looking at some Rotiforms this guy is selling for pretty cheap or some 3sdm wheels. I'm sort of still indecisive still but we'll see in the next month!

[neutron256]

Well I was planning on going to RK tonight since I haven't been in a couple weeks, but I think this heat is going to be way too much for me.

Anyone planning on going?