BRZ tS and STI parts List

[adamg]

Originally Posted by Jfheisenberg

What camera are you using to take the picture? looks nice.

Originally Posted by Porcupint

All the EXIF data shows on the bottom of the flickr page if you click the image.

Yup flickr is pretty good at that

but anyways Canon 5Dmk2 with the 40mm f2.8 pancake lens, great lens for lifestyle shots when you want something compact to walk around with

[Createddeleted]

Originally Posted by adamg

agreed, i was hoping they would release all the new pieces

currently im just using red tape

ST20502AS020 - Flexible V-Bar
ST57731AS030 - Foglight Cover Right
ST57731AS040 - Foglight Cover Left
ST57727AS010 - Red Front Grill Stripe
No Number Reported - Red Rear Apron Stripe
ST20310AS070 - Front Right Strut
ST20310AS080 - Front Left Strut
ST20330AS030 - Front Coil Springs
ST20365AS030 - Rear shock absorber
ST20380AS000 - Rear Coil springs (same as the ones that have been out)
20370FG002 - Rear Strut mount (part number is the same as the older 10 models?)
ST20176AS010 - Rear lower stopper. The 2015 TS now uses a lower stopper instead of an upper stopper. The position has changed.

Rumored to use the standard link parts instead of the upgraded STI ones in the rear suspension.


Rear stopper. 2013 on the left (20176E), 2015 on the right (20176A). I've already asked Japan parts on this one.

Source: http://minkara.carview.co.jp/en/user...blog/36217628/

[chaoskaze]

Originally Posted by Createddeleted

ST20502AS020 - Flexible V-Bar
ST57731AS030 - Foglight Cover Right
ST57731AS040 - Foglight Cover Left
ST57727AS010 - Red Front Grill Stripe
No Number Reported - Red Rear Apron Stripe
ST20310AS070 - Front Right Strut
ST20310AS080 - Front Left Strut
ST20330AS030 - Front Coil Springs
ST20365AS030 - Rear shock absorber
ST20380AS000 - Rear Coil springs (same as the ones that have been out)
20370FG002 - Rear Strut mount (part number is the same as the older 10 models?)
ST20176AS010 - Rear lower stopper. The 2015 TS now uses a lower stopper instead of an upper stopper. The position has changed.

Rumored to use the standard link parts instead of the upgraded STI ones in the rear suspension.


Rear stopper. 2013 on the left (20176E), 2015 on the right (20176A). I've already asked Japan parts on this one.

Source: http://minkara.carview.co.jp/en/user...blog/36217628/

OMG! Nice find!!! (I wish I can click that thanks botton 10 times. )

[Jfheisenberg]

Originally Posted by Createddeleted

ST20502AS020 - Flexible V-Bar
ST57731AS030 - Foglight Cover Right
ST57731AS040 - Foglight Cover Left
ST57727AS010 - Red Front Grill Stripe
No Number Reported - Red Rear Apron Stripe
ST20310AS070 - Front Right Strut
ST20310AS080 - Front Left Strut
ST20330AS030 - Front Coil Springs
ST20365AS030 - Rear shock absorber
ST20380AS000 - Rear Coil springs (same as the ones that have been out)
20370FG002 - Rear Strut mount (part number is the same as the older 10 models?)
ST20176AS010 - Rear lower stopper. The 2015 TS now uses a lower stopper instead of an upper stopper. The position has changed.

Rumored to use the standard link parts instead of the upgraded STI ones in the rear suspension.


Rear stopper. 2013 on the left (20176E), 2015 on the right (20176A). I've already asked Japan parts on this one.

Source: http://minkara.carview.co.jp/en/user...blog/36217628/

Nice find, the part for the red front grill stripe is not in japanparts.com yet

[adamg]

Nice find, hopefully the vendors can get a hold of these parts

[RIP.S2000]

I may have missed it, but I didn't see this on the list.

https://www.japanparts.com/parts/detail/44518

It's the front grill emblem.

[ricerocket93]

Brembo Brake Parts Added to the list!

[mixedjuice]

Anybody have any input on how to install the fron STI emblem and rear emblem.
I plan to put the rear emblem where the tS badge is since that badge is not ever coming out soon to the US public and don't want to remove my SUBARU badge from the back.

[spicyricecake]

front emblem is pretty simple. it tucks to the right, but cross your fingers that your arm/hand is small enough to fit through the front mesh grille to screw the screws in

[SPCorBUST]

I just took the bumper off. The fear emblem is curved for the top left so if you're trying for bottom right it might snap when making it go flat

Sent from my SM-G925T using Tapatalk

[DSOmegaX]

Originally Posted by mixedjuice

Anybody have any input on how to install the fron STI emblem and rear emblem.
I plan to put the rear emblem where the tS badge is since that badge is not ever coming out soon to the US public and don't want to remove my SUBARU badge from the back.

If you were planning to do that with the rear you should have gotten the badge off a wrx STi. The brz one is curved to match the curvature of the trunk where it's suppose to be installed so it wouldn't sit right on a flat surface

[Kayshart]

Originally Posted by ricerocket93

Brembo Brake Parts Added to the list!

Are those parts the same as the brakes shown in this link?

http://www.sti.jp/product/brzts2015/...equipment.html

[mixedjuice]

So I managed to place the emblem below the SUBARU Badge.
Looks a little clunked together but overall a great fit.
I am getting mixed reviews on the FB Page for BRZ owners. Usually the guys are more than nice and assisting with what is next for the mirrored BRZ build. geez the power of social media makes everybody a critic.
As long as that supercharger arrives, i'll keep my silence

What do you guys think?

[adamg]

Originally Posted by mixedjuice

So I managed to place the emblem below the SUBARU Badge.
Looks a little clunked together but overall a great fit.
I am getting mixed reviews on the FB Page for BRZ owners. Usually the guys are more than nice and assisting with what is next for the mirrored BRZ build. geez the power of social media makes everybody a critic.
As long as that supercharger arrives, i'll keep my silence

What do you guys think?

imo that badge on 99% of builds is for false attention and is as cool as rally mud flaps, plasti dipped parts, crazy tow hooks, and 20 stickers all over the car