ALL ARIZONA FR-S/BRZ OWNERS HOME PAGE - Page 1154 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Kst092 · 09-14-2013, 05:05 AM

Quote:

Originally Posted by redsuns03

I believe meet around 9 right?

Thanks guy your awesome

see you then

FR-Shadow · 09-14-2013, 05:30 AM

Quote:

Originally Posted by redsuns03

I believe meet around 9 right?

Yea lets make it 9. There is parking on monroe and central angles. We should all park there as its straight to the center then

Yruyur · 09-14-2013, 05:49 AM

Thanks @Ninjin for the help tonight. Hopefully you can get your paint done tonight and get some sleep before work.
@jeffsides you can mark me and adam for just hanging out at tech day since we got the swap done tonight. For once I can just chill at an event instead of working on something....unless I get the energy to paint calipers.

@$##$ its hot outside.

Sent from a Motorola DynaTAC 8000X

redsuns03 · 09-14-2013, 05:51 AM

ATTN; HIN Registered cars. JDM Fresh will be meeting at 2nd Street and McKinlet St parking lot at 10 AM leaving at 10:45AM to HIN roll in.

@goast @FR-Shadow @Ninjin @Kst092 @RPg1031 @Sketch575 @Supermassive @SMOKETREES

FR-Shadow · 09-14-2013, 06:06 AM

Quote:

Originally Posted by redsuns03

ATTN; HIN Registered cars. JDM Fresh will be meeting at 2nd Street and McKinlet St parking lot at 10 AM leaving at 10:45AM to HIN roll in.

@goast @FR-Shadow @Ninjin @Kst092 @RPg1031 @Sketch575 @Supermassive @SMOKETREES

I already talked to him and said we will all b one block away and to call us when they r there

Jstunna · 09-14-2013, 10:19 AM

Quote:

Originally Posted by redsuns03

ATTN; HIN Registered cars. JDM Fresh will be meeting at 2nd Street and McKinlet St parking lot at 10 AM leaving at 10:45AM to HIN roll in.

@goast @FR-Shadow @Ninjin @Kst092 @RPg1031 @Sketch575 @Supermassive @SMOKETREES

You guys all have a good time! Unfortunately I won't be able to make it
,but I will be attending tech day on Sunday. I'll be there around 8am.

captain_jack · 09-14-2013, 11:52 AM

Quote:

Originally Posted by Yruyur

Thanks @Ninjin for the help tonight. Hopefully you can get your paint done tonight and get some sleep before work.
@jeffsides you can mark me and adam for just hanging out at tech day since we got the swap done tonight. For once I can just chill at an event instead of working on something....unless I get the energy to paint calipers.

@$##$ its hot outside.

Sent from a Motorola DynaTAC 8000X

When are you getting the upgraded stereo system 500?

sent from your mom

Yruyur · 09-14-2013, 11:59 AM

Not sure at this point.

Sent from a Motorola DynaTAC 8000X

jeffsides · 09-14-2013, 12:58 PM

Quote:

Originally Posted by Jstunna

You guys all have a good time! Unfortunately I won't be able to make it
,but I will be attending tech day on Sunday. I'll be there around 8am.

Just need to make sure @Supermassive is able to pick up the spring compressors from @BugeyedWagon today. Thank you both!!!

Sent from ARIZONA86 HQ

EZWood · 09-14-2013, 01:06 PM

So I might need assistance or instruction on the procedure for tightening the bolts for my header.

SMOKETREES · 09-14-2013, 01:19 PM

Quote:

Originally Posted by EZWood

So I might need assistance or instruction on the procedure for tightening the bolts for my header.

@Ninjin can probably chime in on this since I recall he said something about it before.....

Sent from my HTC One

Ninjin · 09-14-2013, 01:21 PM

Torque down the two outer bolts on each side, then the single inner bolt. It's 22ft-lbs, I think.

Then get the header hot and re-torque while it is hot.

Sent from my GS4.

FR-Shadow · 09-14-2013, 01:27 PM

Thanks for the help lastnight @Ninjin i cant believe it took us that long lol.

Ninjin · 09-14-2013, 01:31 PM

Blame the heat.

Sent from my GS4.

09-14-2013, 05:49 AM	#16145
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	Thanks @Ninjin for the help tonight. Hopefully you can get your paint done tonight and get some sleep before work. @jeffsides you can mark me and adam for just hanging out at tech day since we got the swap done tonight. For once I can just chill at an event instead of working on something....unless I get the energy to paint calipers. @$##$ its hot outside. Sent from a Motorola DynaTAC 8000X __________________

09-14-2013, 11:59 AM	#16150
Yruyur Senior Member Join Date: Jun 2012 Drives: Scion fr-s asphalt M/T Location: Phoenix, AZ Posts: 4,192 Thanks: 1,416 Thanked 1,631 Times in 941 Posts Mentioned: 96 Post(s) Tagged: 0 Thread(s)	Not sure at this point. Sent from a Motorola DynaTAC 8000X __________________

09-14-2013, 01:27 PM	#16155
FR-Shadow Senior Member Join Date: Oct 2012 Drives: 2013 Scion FRS Location: Arizona Posts: 1,418 Thanks: 260 Thanked 502 Times in 297 Posts Mentioned: 31 Post(s) Tagged: 0 Thread(s)	Thanks for the help lastnight @Ninjin i cant believe it took us that long lol. __________________ Car Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Arizona Bill 'could' criminalize Internet Trolls	Giccin	Off-Topic Lounge [WARNING: NO POLITICS]	18	12-30-2013 03:54 PM
Accessories page for Canadian BRZ owners	percyng	CANADA	1	06-15-2012 08:27 PM
FR-S\BRZ owners give thumbs up to AE86 owners	Oriental Life	Scion FR-S / Toyota 86 GT86 General Forum	19	06-13-2012 04:12 AM
Home Sweet Home, it made it today. Delivery party 5/11 though..	MarkRacerX	Scion FR-S / Toyota 86 GT86 General Forum	15	05-14-2012 04:24 PM

09-14-2013, 01:06 PM	#16152
EZWood BAMF Join Date: Jun 2012 Drives: 13 fr-s, whiteout, MT. 94 ZJ Location: Apache Junction, Az Posts: 1,007 Thanks: 209 Thanked 345 Times in 215 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	So I might need assistance or instruction on the procedure for tightening the bolts for my header.

09-14-2013, 01:21 PM	#16154
Ninjin Senior Member Join Date: Jun 2012 Drives: SWP BRZ 6MT Location: Phoenix, AZ Posts: 876 Thanks: 415 Thanked 576 Times in 332 Posts Mentioned: 144 Post(s) Tagged: 0 Thread(s)	Torque down the two outer bolts on each side, then the single inner bolt. It's 22ft-lbs, I think. Then get the header hot and re-torque while it is hot. Sent from my GS4.

09-14-2013, 01:31 PM	#16156
Ninjin Senior Member Join Date: Jun 2012 Drives: SWP BRZ 6MT Location: Phoenix, AZ Posts: 876 Thanks: 415 Thanked 576 Times in 332 Posts Mentioned: 144 Post(s) Tagged: 0 Thread(s)	Blame the heat. Sent from my GS4.

User Name		Remember Me?
Password