Monmouth County NJ Pulley Installation

[Raven86]

Does anybody know a place in Monmouth County that can install a lightweight pulley and about how much they would charge? I dont have the tools to do it myself and the dealership wanted $200 which seems kinda crazy. Thanks

[AZP Installs]

We aren't in Monmouth but pretty close. Should take about 1 hr of labor so you are looking at about $85. Shoot us an email.

-mike


11+ Years Maintaining, Modifying and Educating TriState Subaru Enthusiasts.
Call directly as We carry almost every manufacturer now, so before you buy parts call us.
AIM: AZP Installs | E-mail: sales@azpinstalls.com | 725 Fairfield Ave | Kenilworth, NJ 07033 | 908.248.2971 | T-1 Certified Amsoil Direct Jobber
"Race Tested, Enthusiast Approved!"

[Chewie4299]

Have you looked into tackling this yourself at all? It truly is extremely simple. Shouldn't take more than half an hour with the right tools. A pro with the better "right tools" within reach could probably knock this out in 10 minutes if they cared to.

I don't know what you have access to or what your abilities are but I'll recommend that you never ask the dealership to install aftermarket parts for you. They'll never quote you a sane price if they'll even do it at all.

Sent from my Galaxy Nexus using Tapatalk 2

[Raven86]

Originally Posted by Chewie4299

Have you looked into tackling this yourself at all? It truly is extremely simple. Shouldn't take more than half an hour with the right tools. A pro with the better "right tools" within reach could probably knock this out in 10 minutes if they cared to.

I don't know what you have access to or what your abilities are but I'll recommend that you never ask the dealership to install aftermarket parts for you. They'll never quote you a sane price if they'll even do it at all.

Sent from my Galaxy Nexus using Tapatalk 2

i dont have a garage or the tools to do it. plus my cars AT so i'd need that extra tool.

[Foobar]

Originally Posted by Raven86

i dont have a garage or the tools to do it. plus my cars AT so i'd need that extra tool.

Don't need a garage - could do it on the side of the road if you really wanted to. If you have absolutely no tools at all, you're looking for the pulley tool (45 bucks), a breakar bar (figure around 20), flathead/phillips screwdrivers (c'mon you have to have these at least), socket wrench, 10mm socket, 14mm socket, 22m socket (could probably get all of these in a set, which you should consider investing in anyway - anywhere from 40 on up depending on quality and quantity),torque wrench (figure around 45).

Aside from the pulley tool (and possibly the breaker bar), you should really consider getting a good socket wrench set and a torque wrench if you ever plan on doing anything yourself with your car.

[GregV]

Where in Monmouth county? There are a lot of places that can do this.

[Raven86]

Originally Posted by GregV

Where in Monmouth county? There are a lot of places that can do this.

Freehold

[GregV]

Originally Posted by Raven86

Freehold

Near there what comes to mind is Pride Performance in Keansburg, or Akuma Motorsports in Woodbridge

[Boxer-86]

Shore Motorsports does good work and they're in your neck of the woods. I had them install my clutch and flywheel in my turbo Miata when I lived in Freehold and they did good work, completed the job quickly and charged a fair price.

[njforcedlife77]

Originally Posted by Raven86

Does anybody know a place in Monmouth County that can install a lightweight pulley and about how much they would charge? I dont have the tools to do it myself and the dealership wanted $200 which seems kinda crazy. Thanks

one of our guys in club can do it or lux motorwerks in keyport one of the best shops around. Just open right next to lux is jdsmotoing was at there grand opening today great guys.

Sent from my SPH-L710 using Tapatalk 2