08-15-2017, 04:10 PM | #1 |
Junior Member
Join Date: Apr 2013
Drives: WRB Subaru BRZ
Location: San Francisco, CA
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
2013 STI Front Brembos (Bleeders swapped)
SOLD
I have a set of 2013 front STI Brembos in good condition. The guy I bought them from said they had about 30k miles on them. The clear coat is all still intact and looks good. I've also already swapped the bleeders which if you haven't had the pleasure of doing yet, you can read about the headaches it can cause on the forums. Haha. I bought them because I was doing the swap on my car with a different set of STI Brembos when a powdercoater insisted on separating the halves to paint them and he stripped some of the bolts. I bought these because I though my first set were trashed. Long story short, with the help of a local machine shop, some helicoils, and a new powdercoater, I was able to salvage my original set. I have since installed them and they are working perfectly. I'm very happy with this swap. So now I'm selling these spare calipers because I ended up not needing them. I can include everything in the picture if you want including: New Giro Disc dust boots New ARP caliper bolts Brembo seal conditioning fluid (about 2/3 of a bottle left. Plenty if you decide to rebuild these) New brake pad hardware and pins Used oem brake pads. Still have some life left if you want to use them SOLD Let me know if you have any questions. Last edited by JW-BRZ; 09-06-2017 at 07:18 PM. Reason: Sold |
08-16-2017, 01:46 PM | #2 |
Senior Member
Join Date: Jan 2014
Drives: 2013 frs
Location: Miami fl
Posts: 206
Thanks: 38
Thanked 49 Times in 38 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Do they need to have the dust boots changed or are the just spares incase?
|
08-16-2017, 03:24 PM | #3 |
Junior Member
Join Date: Apr 2013
Drives: WRB Subaru BRZ
Location: San Francisco, CA
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
The dust boots are just in case you want to replace them. The guy I bought them off of gave them to me because he had them laying around.
Over all the brakes are very clean and in good condition. There is no reason to rebuild these unless you are planing to get them powdercoated in which case you might as well because you have to take them apart anyways. If you are wanting to keep them black though, then these are ready to bolt on as is. |
08-17-2017, 04:43 PM | #4 |
Senior Member
Join Date: May 2015
Drives: FRS
Location: Chiraq
Posts: 299
Thanks: 74
Thanked 54 Times in 50 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
So these would just bolt right up? Would anything else be needed? Except maybe fresh pads?
|
08-17-2017, 07:18 PM | #5 |
Junior Member
Join Date: Apr 2013
Drives: WRB Subaru BRZ
Location: San Francisco, CA
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Yes. These'll bolt right up. The only thing you would NEED is a new set of front rotors. Any rotors from an 03-07 wrx STI with a 5x100 bolt pattern should work. There's lots of info out there on which rotors to get.
Here is one of the main threads I used on my install. http://www.ft86club.com/forums/showthread.php?t=61978 I would also probably RECOMMEND a new set of pads of your choice and some stainless brake lines all though the OEM lines will work just fine. But if you're going to upgrade you might as well do it all. |
08-18-2017, 05:02 PM | #6 |
Senior Member
Join Date: May 2015
Drives: FRS
Location: Chiraq
Posts: 299
Thanks: 74
Thanked 54 Times in 50 Posts
Mentioned: 1 Post(s)
Tagged: 0 Thread(s)
|
Hey man, going to send message on hear. I am interested now
|
|
|
Tags |
brake, brembo, sti |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Front brake rotors swapped to rear | jag054 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 5 | 11-17-2016 09:58 AM |
GTA Speed Bleeders? | FLYFISHR | CANADA | 0 | 06-23-2014 11:51 PM |
WTB STI Front Brembos | bee_are_zee | Want-To-Buy Requests | 0 | 04-15-2014 10:56 PM |
04 STI Brembos, Hawk pads, 5x100 front rotors | Philly758 | Brakes, Suspension, Chassis | 7 | 12-06-2013 07:55 AM |
has anyone actually swapped the brz front bumper for an frs? | fiveoneoh | Cosmetic Modification (Interior/Exterior/Lighting) | 1 | 02-27-2013 05:09 PM |