|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
11-07-2016, 07:59 PM | #1 |
Senior Member
Join Date: May 2016
Drives: 2013 frs
Location: British columbia
Posts: 313
Thanks: 107
Thanked 19 Times in 16 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Whiteline KCA416 ?? 16 or 14mm
I thought we needed 14mm for thw whiteline camber bolts. Frmotorsports.com part number is for 16mm
Which is it we need!? Sent from my iPhone using Tapatalk
__________________
2013 silver frs, injen intake, agency power header, hks exhaust, no kitties, ecutek tune
|
11-07-2016, 08:06 PM | #2 |
Senior Member
Join Date: Jul 2012
Drives: 2013 Asphalt FR-S Manual
Location: Whitby, ON, Canada
Posts: 6,716
Thanks: 7,875
Thanked 3,353 Times in 2,134 Posts
Mentioned: 99 Post(s)
Tagged: 1 Thread(s)
|
30 seconds on the whiteline site found your answer:
http://www.whiteline.com.au/product_...CA416&sq=22291 Look at the section for applicable vehicles.
__________________
Light travels faster than sound, so people may appear to be bright until you hear them speak... flickr |
11-07-2016, 10:40 PM | #3 | |
-
Join Date: Nov 2012
Drives: '13 FRS - STX
Location: SF Bay Area
Posts: 10,376
Thanks: 13,768
Thanked 9,495 Times in 5,008 Posts
Mentioned: 94 Post(s)
Tagged: 3 Thread(s)
|
Quote:
|
|
The Following User Says Thank You to strat61caster For This Useful Post: | wparsons (11-08-2016) |
11-07-2016, 10:47 PM | #4 | |
Panda Trueno
Join Date: Jan 2015
Drives: No twin now.
Location: North Indiana
Posts: 3,347
Thanks: 2,113
Thanked 2,409 Times in 1,332 Posts
Mentioned: 17 Post(s)
Tagged: 2 Thread(s)
|
Quote:
|
|
11-08-2016, 10:13 AM | #5 |
Senior Member
Join Date: May 2016
Drives: 2013 frs
Location: British columbia
Posts: 313
Thanks: 107
Thanked 19 Times in 16 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Well im sorry amazon and a bunch of ppl here say 14mm Sent from my iPhone using Tapatalk
__________________
2013 silver frs, injen intake, agency power header, hks exhaust, no kitties, ecutek tune
|
11-08-2016, 01:22 PM | #6 | |
Senior Member
Join Date: Jul 2012
Drives: 2013 Asphalt FR-S Manual
Location: Whitby, ON, Canada
Posts: 6,716
Thanks: 7,875
Thanked 3,353 Times in 2,134 Posts
Mentioned: 99 Post(s)
Tagged: 1 Thread(s)
|
Quote:
You need to read the context of what you're looking at better. Are the people that are suggesting a 14mm bolt talking about a lobed bolt (like the whiteline), or a solid one (like the factory crash bolts)? Next time you have a question, re-read the information that's already in front of you. I'd be willing to bet that you already have everything you need to know in front of you, you just need to understand what you're reading.
__________________
Light travels faster than sound, so people may appear to be bright until you hear them speak... flickr |
|
The Following 3 Users Say Thank You to wparsons For This Useful Post: |
11-08-2016, 01:40 PM | #7 | |
Panda Trueno
Join Date: Jan 2015
Drives: No twin now.
Location: North Indiana
Posts: 3,347
Thanks: 2,113
Thanked 2,409 Times in 1,332 Posts
Mentioned: 17 Post(s)
Tagged: 2 Thread(s)
|
Quote:
Here is what I would do in your situation. http://www.ft86speedfactory.com/whit...l#.WCIbwk3rthE They don't even say a MM size, they're just selling you the right product. No thought needed. Then again, information being given to you left and right. |
|
11-08-2016, 08:31 PM | #8 | |
Senior Member
Join Date: May 2016
Drives: 2013 frs
Location: British columbia
Posts: 313
Thanks: 107
Thanked 19 Times in 16 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Why do you need to coach me. What does it matter what type of bolt they were talking about. You can ramble for 30 sentances but you cant just say "14 or 16" I read conflicting opinions and part numbers. Just wanted a straight simple answer. Thanks though Sent from my iPhone using Tapatalk
__________________
2013 silver frs, injen intake, agency power header, hks exhaust, no kitties, ecutek tune
|
|
11-08-2016, 08:33 PM | #9 | |
Senior Member
Join Date: May 2016
Drives: 2013 frs
Location: British columbia
Posts: 313
Thanks: 107
Thanked 19 Times in 16 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Yah i boughtem this morning. Just on a couple sites 14mm whitelines. Kca414. Said tey fit on frs. And when i googles 14 or 16mm camber bolt frs. There was a few discusions about it. With people sayine one or the other. I wanted to order it asap this morning and just needed a straight answer Sent from my iPhone using Tapatalk
__________________
2013 silver frs, injen intake, agency power header, hks exhaust, no kitties, ecutek tune
|
|
11-08-2016, 09:32 PM | #10 | |
Senior Member
Join Date: Jul 2012
Drives: 2013 Asphalt FR-S Manual
Location: Whitby, ON, Canada
Posts: 6,716
Thanks: 7,875
Thanked 3,353 Times in 2,134 Posts
Mentioned: 99 Post(s)
Tagged: 1 Thread(s)
|
Quote:
A 16mm lobed bolt is one option, the other is a 14mm solid bolt. THAT's why what kind of bolt they're talking about matters. Context matters, A LOT. If you spent half as much time actually reading and comprehending the information already available as you do making a post for every single question you wouldn't need to be asking so many questions (or end up arguing with people trying to help you). Literally every question you've asked has already been answered on here already, or is information easily available with a quick google search.
__________________
Light travels faster than sound, so people may appear to be bright until you hear them speak... flickr |
|
The Following User Says Thank You to wparsons For This Useful Post: | D_Thissen (11-09-2016) |
11-08-2016, 10:18 PM | #11 | |
Guilt free parts vulture!
Join Date: Jul 2016
Drives: 2024 GR86 Trueno Halo 6MT
Location: San Diego
Posts: 1,683
Thanks: 497
Thanked 1,772 Times in 940 Posts
Mentioned: 6 Post(s)
Tagged: 0 Thread(s)
|
Quote:
If you want to adjust camber, the most common way is to use either a 14mm crash bolt in the upper hole or a 16mm lobed bolt in the top hole as you suggest. It is also possible to use a 14mm lobed bolt in the lower hole and retain the 16mm stock bolt in the upper hole. Unless you have unusual circumstances, you do not want to use the 14mm lobed bolt in the upper hole. For the maximum adjustment you can use the 14mm lobed bolt in the lower hole and either the 16mm lobed bolt OR the 14mm crash bolt in the upper hole. I do not recommend using the 14mm lobed bolt in the upper hole if you are also using one in the lower hole. The reason being that the 14mm lobed bolt is not as strong/durable as the 14mm solid bolt. Generally it is not recommended to use both the upper and lower holes for adjusting camber unless it is a track car with regular inspections. The reason you have conflicting input on 14mm vs 16mm lobed bolts is that some people prefer using the lower hole to adjust camber for technical reasons beyond this discussion. Either hole will work. |
|
11-08-2016, 10:35 PM | #12 |
Senior Member
Join Date: Jul 2012
Drives: 2013 Asphalt FR-S Manual
Location: Whitby, ON, Canada
Posts: 6,716
Thanks: 7,875
Thanked 3,353 Times in 2,134 Posts
Mentioned: 99 Post(s)
Tagged: 1 Thread(s)
|
And that's exactly why I asked if the other thread he was talking about was talking about solid or lobed. Without knowing the context you can't get a good answer.
__________________
Light travels faster than sound, so people may appear to be bright until you hear them speak... flickr |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Conflicting torque spec (83 vs 106 ft-lbs) for Whiteline KCA416 | jonnyozero3 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 2 | 05-29-2014 12:48 PM |
FS: New Whiteline camber bolt KCA416 | damaster32 | Brakes, Suspension, Chassis | 2 | 03-25-2014 11:55 AM |
Whiteline Camber Bolts (KCA416) | Steve | Canada Classifieds | 11 | 01-07-2014 10:01 PM |