|
Issues | Warranty | Recalls / TSB Problems, issues, recalls, TSBs |
|
Thread Tools | Search this Thread |
06-11-2014, 08:43 PM | #1 |
Join Date: Jan 2012
Drives: 2013 "AVO Orange" FR-S
Location: Seattle, WA
Posts: 1,067
Thanks: 69
Thanked 2,277 Times in 636 Posts
Mentioned: 108 Post(s)
Tagged: 2 Thread(s)
|
P0016/P0017 cause
If you have a mechanical issue that is causing your car to stall out when coming to a stop [error codes P0016, P0017], it is likely because of your cam sprocket. This photo illustrates the issue - the little piece on the inside left that looks like it has a spring behind it is the cause. It is actually supposed to sit flush with the back, but it will pop out and cause a oil pressure loss, which causes the cam to not respond fully. If this has happened, the cam sprocket will need to be replaced unless you can get that piece to sit flush again.
Here is two more shots: This is how the back of the cam sprocket should look - the piece is fit flush with the inner surface. The entire sprocket/cam assembly. |
The Following 5 Users Say Thank You to AVOturboworld For This Useful Post: | blackfireball5 (06-15-2014), JB86'd (06-11-2014), JOSEC (06-12-2014), Lonewolf (06-15-2014), tyrantcf (06-11-2014) |
06-15-2014, 12:05 PM | #2 |
Senior Member
Join Date: Jun 2012
Drives: Scion FRS Firestorm
Location: Cleveland, Ohio
Posts: 538
Thanks: 459
Thanked 102 Times in 74 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
@AVOturboworld I am currently having a P0016 code that won't go away. Came back after I reflashed my ECU with my tune.
How hard of a job is this to inspect? Any links to diagrams to DIYs? Also, I have an oil pressure gauge. Would you notice a dangerous or drastic drop in oil pressure when this happens? Toyota has had my car twice. It is highly modified but they told me if this is something not caused by my mods they will cover it. Last edited by blackfireball5; 06-15-2014 at 01:00 PM. |
06-16-2014, 01:07 AM | #3 |
Join Date: Jan 2012
Drives: 2013 "AVO Orange" FR-S
Location: Seattle, WA
Posts: 1,067
Thanks: 69
Thanked 2,277 Times in 636 Posts
Mentioned: 108 Post(s)
Tagged: 2 Thread(s)
|
you can see it when logging with ecutek - the cams don't respond as fast as the other side. The graphs when revving up won't be similar to each other.
|
06-16-2014, 01:14 AM | #4 |
Senior Member
Join Date: Jun 2012
Drives: Scion FRS Firestorm
Location: Cleveland, Ohio
Posts: 538
Thanks: 459
Thanked 102 Times in 74 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Awesome! This is great! I'll give this a shot tomorrow! Would you say it's dangerous to track the car with this issue?
Sent from my Nexus 5 using Tapatalk
__________________
|
06-16-2014, 01:19 AM | #5 |
Senior Member
Join Date: Jun 2012
Drives: Scion FRS Firestorm
Location: Cleveland, Ohio
Posts: 538
Thanks: 459
Thanked 102 Times in 74 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
What specific parameter do you log?
Sent from my Nexus 5 using Tapatalk
__________________
|
06-18-2014, 07:05 AM | #6 |
Motorsports
Join Date: Nov 2011
Drives: 19BRZ PP, 16 M4
Location: ATLANTA, GA
Posts: 67
Thanks: 36
Thanked 62 Times in 27 Posts
Mentioned: 16 Post(s)
Tagged: 0 Thread(s)
|
what keeps the metal piece sitting flush? is there a tab of some sorts?
__________________
Douglas W.
|
The Following User Says Thank You to DBW For This Useful Post: | ATL BRZ (09-29-2018) |
05-02-2016, 05:49 PM | #7 |
Director of Awesome!! :)
Join Date: Nov 2012
Drives: Scion FR-S
Location: JAX, FL
Posts: 270
Thanks: 308
Thanked 87 Times in 66 Posts
Mentioned: 3 Post(s)
Tagged: 3 Thread(s)
|
So the giveaway for this issue is the car turning off when stopped?
__________________
Life is all about the ride, so go full throttle baby!!
[SIGPIC][/SIGPIC] |
05-02-2016, 06:17 PM | #8 |
Senior Member
Join Date: Jun 2013
Drives: 2023 GR SUPRA,15 FR-S (SOLD)
Location: Philadelphia, PA
Posts: 4,235
Thanks: 3,086
Thanked 2,101 Times in 1,397 Posts
Mentioned: 31 Post(s)
Tagged: 2 Thread(s)
|
Most like coincidental with codes P0016 and P0017
__________________
*SOLD*OFT Stage 2 UEL E85/Nameless Performance 3 inch axleback with 5 inch mufflers/ TRD CAI / CNT UEL/ Cusco Strut BAR & LHD Brake Stop / "JDM" Toyota Badges / WinJet JDM headlights - DRL MOD from fteightysix.com - 5000K Diode Dynamics HID kit / Diode Dynamics LED interior Lights and sidemarker bulbs / JDM Clear Sidemarkers / Diode Dynamics LED switchbacks/ OLM LED rear turn signals / Tap Turn Relay*SOLD*
|
The Following User Says Thank You to FRSBRZGT86FAN For This Useful Post: | PrDarkKnight (05-23-2016) |
05-10-2016, 10:16 PM | #9 |
Senior Member
Join Date: Apr 2015
Drives: FR-S
Location: Chicago, IL
Posts: 282
Thanks: 56
Thanked 68 Times in 43 Posts
Mentioned: 2 Post(s)
Tagged: 1 Thread(s)
|
P0017... No idling issues. Can be cleared while the car is on and doesn't come back up till you turn the car off and back on.
Any ideas? Is this cam sprocket the only cause of the p0017 issue? I don't really want to spend $200 on a part and a day of labor to find out it's something else. Haha
__________________
|
05-10-2016, 11:16 PM | #10 | |
Banned
Join Date: Dec 2013
Drives: FT86
Location: Australia
Posts: 7,998
Thanks: 1,035
Thanked 4,988 Times in 2,982 Posts
Mentioned: 598 Post(s)
Tagged: 2 Thread(s)
|
Quote:
check the TSB here http://www.ft86club.com/forums/showthread.php?t=21868 might be a number of causes ecu/cam sprocket/sensor,ecu or sensor clearance |
|
07-05-2016, 11:29 AM | #11 |
Senior Member
Join Date: Aug 2012
Drives: 2013 FR-S
Location: San Diego
Posts: 300
Thanks: 180
Thanked 58 Times in 46 Posts
Mentioned: 4 Post(s)
Tagged: 0 Thread(s)
|
I just got the p0017 code this morning, could this be just the sensor? This came after having the p000b(exhaust cam position response slow) for a while. I cleared the code before I drove to work but it still was there according to my reader. I then just checked it at lunch right now and it didn't show at all. The part numbers for both are SU00300413 AND 414. Which one is for bank 1?
__________________
STREET MOD. My wallet now hates me....
|
07-15-2016, 07:53 PM | #12 |
Member
Join Date: Apr 2016
Drives: BRZ
Location: US
Posts: 24
Thanks: 0
Thanked 1 Time in 1 Post
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Sorry to break the news, but typically this is the cam sprocket problem. Can you describe your issue a bit more? How does it idle?
|
08-23-2016, 05:50 PM | #13 |
Senior Member
Join Date: Jun 2012
Drives: Scion FRS Firestorm
Location: Cleveland, Ohio
Posts: 538
Thanks: 459
Thanked 102 Times in 74 Posts
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
|
Is there a guide on how to do this repair? Could someone detail at least how to access this to inspect?
|
08-23-2016, 07:09 PM | #14 | |
extra what?
Join Date: Sep 2014
Drives: a 13 e8h frs
Location: vantucky, wa
Posts: 32,087
Thanks: 52,530
Thanked 36,814 Times in 19,087 Posts
Mentioned: 1111 Post(s)
Tagged: 9 Thread(s)
|
Quote:
The rule here is "If I have to ask how, then I'm not qualified."
__________________
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
P0016 fixable without new ECU? | Mr.Jay | Issues | Warranty | Recalls / TSB | 8 | 02-06-2022 05:15 AM |
p0016 need help asap | lol | Issues | Warranty | Recalls / TSB | 25 | 10-30-2018 03:49 PM |
Major accident/Engine failure after repeated P0351/P0017/P0019 | DB86 | Issues | Warranty | Recalls / TSB | 48 | 09-16-2014 03:05 PM |