Random Thoughts - Part Deux [NO POLITICS] - Page 265 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Tcoat · 03-21-2016, 11:12 AM

Quote:

Originally Posted by Ashikabi

Wheels, oil change, UEL, push start system

Was reading and thinking " two days? Really? Wheels 20 minutes, oil change 1/2 hour, uel about an hour, push start system OH SHIT ya could take a while".

Dadhawk · 03-21-2016, 11:15 AM

Quote:

Originally Posted by Tcoat

To reference what we were saying on anther thread I see that it has the original stock wheels. That is always a very good sign that it wasn't messed with too much. Even if they did have different wheels on it at some point they held onto those all these years so they cared about the stock status of the car.

Yep, that was the first thing I noticed.

Tcoat · 03-21-2016, 11:19 AM

Quote:

Originally Posted by Tectoniic

Another blown motor in the FI section. I really gotta stop reading those threads

Accidental 20PSI spike will do that! Dude took it well I will say that.
Don't suppose anybody has noticed but we have been months without a single stock engine blowing. Even the FI reports have died to a trickle.

ZOMFGAARON · 03-21-2016, 11:23 AM

Come to Cali ichi and I'll help you do your studs.

Sent from my iPhone using Tapatalk

Tectoniic · 03-21-2016, 11:27 AM

Quote:

Originally Posted by Tcoat

Accidental 20PSI spike will do that! Dude took it well I will say that.
Don't suppose anybody has noticed but we have been months without a single stock engine blowing. Even the FI reports have died to a trickle.

Regardless of FI or not I'm always on the lookout for the blown engine threads and have definitely noticed the drop off as well. I have a boost control solenoid to hopefully never have a bad spike but at least the thread was very positive/helpful and not placing blame.

ichitaka05 · 03-21-2016, 11:27 AM

Quote:

Originally Posted by ZOMFGAARON

I got all 5 replaced on one of my wheels for $40. Plus like $1.50 a stud but they were oem. The place told me they'd replace all wheels for that cost on labor as long as I supplied the parts. After watching it be done I'm fairly sure I could do it myself if I owned an impact wrench.

Sent from my iPhone using Tapatalk

Now that's the price, I'll glad pay.

Quote:

Originally Posted by Tcoat

You just need to hit them harder!

I can take the bolts out. Installing is the different story.

Quote:

Originally Posted by go_a_way1

:face-palm: good point haha!! There is barley enough room to fit a regular stud in, you are going to have to remove the real axles

sorry ichi

As always, you no help lol jk

Yeah, so I heard...

I can install the front ones without taking it out. Rear... Different story.

Quote:

Originally Posted by ZOMFGAARON

Here's a vid on replacing them.

Sent from my iPhone using Tapatalk

Yup, I saw that vid last wkend... I tried. That's how I killed 9 lug nuts

finch1750 · 03-21-2016, 11:34 AM

I have had ARP extended studs laying around for like a year after I stripped 3 oem ones. Been to lazy to install. I swapped the OEM with washers but prob gonna take them to a buddy to do the ARP. If I just take him the hubs and studs off the car already shouldn't take more then an hour of labor.

Ashikabi · 03-21-2016, 11:35 AM

For you guys who were following it, I got that cupholder insert modelled up over in that thread. I can modify it and send a 3d probable file to anyone who wants one

MisterSheep · 03-21-2016, 11:49 AM

Quote:

Originally Posted by finch1750

I have had ARP extended studs laying around for like a year after I stripped 3 oem ones. Been to lazy to install. I swapped the OEM with washers but prob gonna take them to a buddy to do the ARP. If I just take him the hubs and studs off the car already shouldn't take more then an hour of labor.

You STILL haven't installed them

You've had them laying around just as long as I've had my car!

Tcoat · 03-21-2016, 11:53 AM

Quote:

Originally Posted by go_a_way1

:There is barley enough room

jawn · 03-21-2016, 11:55 AM

Quote:

Originally Posted by Tcoat

Accidental 20PSI spike will do that! Dude took it well I will say that.
Don't suppose anybody has noticed but we have been months without a single stock engine blowing. Even the FI reports have died to a trickle.

I don't know why more people don't run AEM Failsafes.

MisterSheep · 03-21-2016, 12:04 PM

I believe @go_a_way1 has the most spelling mistakes out of every member on this forum

Tcoat · 03-21-2016, 12:05 PM

Quote:

Originally Posted by MisterSheep

I believe @go_a_way1 has the most spelling mistakes out of every member on this forum

Most defiantly!

j0307 · 03-21-2016, 12:10 PM

Quote:

Originally Posted by MisterSheep

I believe @go_a_way1 has the most spelling mistakes out of every member on this forum

Oh without a duobt

Sent from my SM-N910V using Tapatalk

03-21-2016, 11:34 AM	#3703
finch1750 Undisputed El Presidente Join Date: Jun 2012 Drives: Zenki 37J ZN6 Location: Stockton, CA Posts: 11,571 Thanks: 9,382 Thanked 9,397 Times in 5,261 Posts Mentioned: 374 Post(s) Tagged: 33 Thread(s)	I have had ARP extended studs laying around for like a year after I stripped 3 oem ones. Been to lazy to install. I swapped the OEM with washers but prob gonna take them to a buddy to do the ARP. If I just take him the hubs and studs off the car already shouldn't take more then an hour of labor. __________________ "Just like how a strut bar somehow enables you to corner 20MPH faster around a cloverleaf on-ramp, when the reality is, you can do it already but you just don't have to balls to do it." - CSG David

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Language Rant Part Deux	MuseChaser	Off-Topic Lounge [WARNING: NO POLITICS]	43	04-23-2017 07:55 PM
Random thoughts thread	MrVito	Off-Topic Lounge [WARNING: NO POLITICS]	37188	02-25-2016 10:00 AM
Random Rubber Part	OoLong	BRZ First-Gen (2012+) -- General Topics	8	01-28-2014 10:31 AM
Crew Carshow : Part Deux 9/7/13	saiyajinimports	Great Lakes	0	08-17-2013 05:18 AM

03-21-2016, 11:23 AM	#3700
ZOMFGAARON A Demon Join Date: Dec 2013 Drives: Raven GT86 Location: Denver Posts: 1,992 Thanks: 190 Thanked 1,321 Times in 701 Posts Mentioned: 20 Post(s) Tagged: 0 Thread(s)	Come to Cali ichi and I'll help you do your studs. Sent from my iPhone using Tapatalk

03-21-2016, 11:35 AM	#3704
Ashikabi Senior Member Join Date: Aug 2014 Drives: 2013 FR-S Location: Northwest Iowa Posts: 7,355 Thanks: 454 Thanked 4,543 Times in 2,948 Posts Mentioned: 59 Post(s) Tagged: 5 Thread(s)	For you guys who were following it, I got that cupholder insert modelled up over in that thread. I can modify it and send a 3d probable file to anyone who wants one

User Name		Remember Me?
Password