|
Suspension | Chassis | Brakes -- Sponsored by 949 Racing Relating to suspension, chassis, and brakes. Sponsored by 949 Racing. |
|
Thread Tools | Search this Thread |
03-08-2015, 03:41 PM | #1 |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
114.3 stock rear rotors?
Do they make 114.3 rotors that'll fit on our rear rotors?
Basically I'm looking to do the hub conversion and cannot find a solution... They make rotors that are 114.3 obviously but apparently they require new brakes and that's not in the cards right now ... Basically I'm looking for SAME SPEC Rotors as our rear but are 5x114.3 instead of the stock 5x100. Any advice? |
03-08-2015, 03:53 PM | #2 |
Senior Member
Join Date: Sep 2014
Drives: BRZ
Location: Los Angeles
Posts: 3,053
Thanks: 1,773
Thanked 2,451 Times in 1,271 Posts
Mentioned: 79 Post(s)
Tagged: 0 Thread(s)
|
It is not simply just swapping rotors, you need to swap HUBS in addition. You can buy conversion hubs and drill new holes in the rotors. The other solution is getting sti parts or z32 parts. If you can't afford new brakes, you can't afford the hub conversion. At that point just get conversion spacers.
|
The Following User Says Thank You to swarb For This Useful Post: | Celigts (03-08-2015) |
03-08-2015, 04:49 PM | #3 | |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
I bought the hub conversion rears ... Any way i can avoid re-drilling? They don't make a 5x100 rotor for our cars that also have holes for 5x114.3?? Hard to believe We can't get BOTH! Bought 15mm project kics conversion for the front ... |
|
03-08-2015, 05:18 PM | #4 |
Senior Member
Join Date: Sep 2014
Drives: BRZ
Location: Los Angeles
Posts: 3,053
Thanks: 1,773
Thanked 2,451 Times in 1,271 Posts
Mentioned: 79 Post(s)
Tagged: 0 Thread(s)
|
I remember reading about a rotor that was the same size in 114, you just have to search for it(was it dba rotors?), many companies will find or drill you a set for your application. Or measure/find the specs of the stock size and call someone or open up a application list with specs from a rotor company.
|
The Following User Says Thank You to swarb For This Useful Post: | Celigts (03-08-2015) |
03-08-2015, 06:04 PM | #5 | |
Undisputed El Presidente
Join Date: Jun 2012
Drives: Zenki 37J ZN6
Location: Stockton, CA
Posts: 11,571
Thanks: 9,382
Thanked 9,397 Times in 5,261 Posts
Mentioned: 374 Post(s)
Tagged: 33 Thread(s)
|
Quote:
|
|
The Following User Says Thank You to finch1750 For This Useful Post: | Celigts (03-08-2015) |
03-08-2015, 06:41 PM | #6 |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
03-08-2015, 07:23 PM | #7 |
Undisputed El Presidente
Join Date: Jun 2012
Drives: Zenki 37J ZN6
Location: Stockton, CA
Posts: 11,571
Thanks: 9,382
Thanked 9,397 Times in 5,261 Posts
Mentioned: 374 Post(s)
Tagged: 33 Thread(s)
|
Its been discussed in the z32 caliper swap thread. Search something like "my $600 bbk"
|
The Following User Says Thank You to finch1750 For This Useful Post: | Celigts (03-08-2015) |
03-08-2015, 07:35 PM | #8 | |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
Which is the same thing as the stock FRS rear rotors ... Does this mean it works? I'll see if i can locate the z32 caliper swap thread. |
|
03-08-2015, 07:41 PM | #9 | |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Quote:
http://www.nicoclub.com/archives/nis...r-frs-brz.html But this is a write up for the FRONT. Our Front rotors are different than our rears, so this won't work right? Thanks, |
|
03-08-2015, 07:44 PM | #10 | |
Undisputed El Presidente
Join Date: Jun 2012
Drives: Zenki 37J ZN6
Location: Stockton, CA
Posts: 11,571
Thanks: 9,382
Thanked 9,397 Times in 5,261 Posts
Mentioned: 374 Post(s)
Tagged: 33 Thread(s)
|
Quote:
|
|
The Following User Says Thank You to finch1750 For This Useful Post: | Celigts (03-08-2015) |
03-08-2015, 07:51 PM | #11 |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Rotors:
Rotor Specs: Legacy GT front rotors are 316mm in diameter by 30mm in width. Stock BRZ/FRS rotors are 294mm in diameter and 24mm in width. OEM Legacy GT rotors are 22 lbs while BRZ rotors are 17 lbs. he used legacy rotors in this and they are fronts only. what do i look for when comparing stock rotors to ensure the brakes will fit? stock oem rear frs rotors: I've found that 87-89 z31 (300zx) rotors are: 5x114.3 290x18mm What else do I need to make sure works for the rotors? Remember I'm going to be using the Subaru rear hubs. |
03-08-2015, 08:00 PM | #12 |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
|
03-08-2015, 09:26 PM | #13 |
Senior Member
Join Date: Dec 2013
Drives: 2014 Toyota FRS
Location: California
Posts: 203
Thanks: 67
Thanked 22 Times in 21 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
|
Just checked with a local auto parts store...the z31 rotor and z32 rotors will not fit the hub. They are too big
Back to Square one. Last edited by Celigts; 03-08-2015 at 10:10 PM. |
03-08-2015, 10:35 PM | #14 |
Undisputed El Presidente
Join Date: Jun 2012
Drives: Zenki 37J ZN6
Location: Stockton, CA
Posts: 11,571
Thanks: 9,382
Thanked 9,397 Times in 5,261 Posts
Mentioned: 374 Post(s)
Tagged: 33 Thread(s)
|
What size is the hub on the z32?
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Removing rear brake rotors? | Kuzuri | Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack | 4 | 07-18-2015 09:08 PM |
WTB: Stock pads and rotors | tawheed | Want-To-Buy Requests | 0 | 08-09-2014 03:26 PM |
Important: DBA Rear Rotors (BRZ/FR-S) | FRS2000 | Suspension | Chassis | Brakes -- Sponsored by 949 Racing | 35 | 07-17-2013 08:08 PM |
Selling stock FRS Springs/Struts + Stock Pads + Rotors 6k on all! | NickFRS | Brakes, Suspension, Chassis | 6 | 03-14-2013 01:38 AM |
[WA] FS: GTS Front AND Rear Rotors | stevo_12v | Australia Classifieds | 0 | 01-04-2013 08:43 AM |