Jackson Racing Supercharger Owners Thread - Page 225 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Binary_fission · 12-23-2015, 05:51 PM

Quote:

Originally Posted by JDMChris

You absolutely need a tune. The car will run lean if not, and will cause damage in time if not tuned.

Talked to churches, they won't be available till next year. So gotta wait but decently will get it tuned thanks. And for pulleys and driveshaft no need tune?

Sent from my SM-N910T using Tapatalk

JDMChris · 12-23-2015, 07:20 PM

Quote:

Originally Posted by Binary_fission

Talked to churches, they won't be available till next year. So gotta wait but decently will get it tuned thanks. And for pulleys and driveshaft no need tune?

Sent from my SM-N910T using Tapatalk

As long as the pulleys are OE size, you don't need to tune for them.

enivid · 12-26-2015, 07:19 PM

Has anyone figured out how to remove the A/C when using this kit? Both the OEM and Raceseng ac delete kits do not work.

ScionOfHorus · 12-26-2015, 07:50 PM

Quote:

Originally Posted by enivid

Has anyone figured out how to remove the A/C when using this kit? Both the OEM and Raceseng ac delete kits do not work.

You will have to make a custom kit.

Sent from my MotoE2(4G-LTE) using Tapatalk

menikmati · 12-26-2015, 08:36 PM

Quote:

Originally Posted by enivid

Has anyone figured out how to remove the A/C when using this kit? Both the OEM and Raceseng ac delete kits do not work.

The guys at Speed Academy notched out their Raceseng AC delete to make it work with the JRSC.

enivid · 12-26-2015, 09:30 PM

Quote:

Originally Posted by menikmati

The guys at Speed Academy notched out their Raceseng AC delete to make it work with the JRSC.

Looks easy enough. Thanks

Binary_fission · 12-26-2015, 09:48 PM

Delete

CSG Mike · 12-28-2015, 04:49 PM

Quote:

Originally Posted by Binary_fission

Anyone know if i have to tune ecu with custom tune. I have headers, front pipe and exhaust, no cats. I'm running carb tune that came with the kit. One of friends mentioned that I have to get custom tune with those mods otherwise it's bad for the car.
Honestly I don't want more hp or boost, im still gettin used to the car with its current set up, i just want to make sure car runs good and it won't have problems with those mods. Also future mods are lightweight pulleys, lightweight driveshaft, flywheel and clutch. Are those mods will require tune as well or nah?
Thanks

Sent from my SM-N910T using Tapatalk

You need to baby that car until you have a proper tune.

briang0901 · 01-01-2016, 09:38 PM

I have the Nameless 2.5" overpipe/downpipe and their axleback. can i still use the carb tune or no?

cookiesowns · 01-02-2016, 06:56 AM

Quote:

Originally Posted by CSG Mike

Make sure your seal is good from the sandwich plate and adapter. If it's slightly off, you should replace the seal.

Hey mike,

Been awhile. I've been noticing some smell of oil when running hard, I noticed there's small drips of oil on the oil filter mount. Is it possible my seal is going out? Where should I source the seal?

CSG Mike · 01-02-2016, 10:14 PM

Quote:

Originally Posted by cookiesowns

Hey mike,

Been awhile. I've been noticing some smell of oil when running hard, I noticed there's small drips of oil on the oil filter mount. Is it possible my seal is going out? Where should I source the seal?

MoCal or Jackson Racing.

Make sure your adapter nut is properly torqued.

CSG Mike · 01-02-2016, 10:14 PM

Quote:

Originally Posted by briang0901

I have the Nameless 2.5" overpipe/downpipe and their axleback. can i still use the carb tune or no?

Stock header + stock front pipe? Yes, you can use the CARB tune!

CSG is ready for your order

BigFatFlip · 01-03-2016, 12:09 AM

Quote:

Originally Posted by briang0901

I have the Nameless 2.5" overpipe/downpipe and their axleback. can i still use the carb tune or no?

Quote:

Originally Posted by CSG Mike

Stock header + stock front pipe? Yes, you can use the CARB tune!

CSG is ready for your order

I believe the nameless overpipe/downpipe replaces the secondary cat with a high flow cat, so it technically wouldn't be "CARB" legal but probably doesn't affect the flow significantly enough and should be OK to use the CARB tune, correct?

CSG Mike · 01-03-2016, 12:29 AM

Quote:

Originally Posted by BigFatFlip

I believe the nameless overpipe/downpipe replaces the secondary cat with a high flow cat, so it technically wouldn't be "CARB" legal but probably doesn't affect the flow significantly enough and should be OK to use the CARB tune, correct?

I wouldn't recommend it if a OEM cat is changed.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Jackson Racing Rotrex Supercharger System Info and Discussion	Jackson Racing	Forced Induction	827	04-06-2020 05:56 PM
Jackson Racing Supercharger Press Release and Info	CounterSpace Garage	Forced Induction	110	01-03-2017 10:04 PM
jackson Racing engine oil cooler - modular to fit the Jackson Racing Supercharger!	CSG Mike	Forced Induction	24	04-27-2016 01:59 PM
Jackson Racing supercharger	NoppyNop	Forced Induction	241	06-26-2014 04:05 PM
Jackson Racing Supercharger Pre-Order Sale, $200 off!	Xero-Limit	Forced Induction	2	03-05-2014 05:14 PM

12-26-2015, 07:19 PM	#3139
enivid Senior Member Join Date: Aug 2012 Drives: WRB JR BRZED Location: Farmington Utah Posts: 445 Thanks: 6 Thanked 218 Times in 133 Posts Mentioned: 17 Post(s) Tagged: 0 Thread(s)	Has anyone figured out how to remove the A/C when using this kit? Both the OEM and Raceseng ac delete kits do not work.

User Name		Remember Me?
Password