project (M230 Chain Gun)

[killercl0wnfish]

little update :
greddy evo 3 exhaust, greddy intake, greddy hood gas shocks, perrion shift bushing, perrion light weight crank pully , all orderd should be here bye the end of the month
installed the FAT MAT 100sq foot this weekend (was a total bitch thanks to a small car and a fat kid not mixing)

blox limited evo shift knob ... ( i really like it but the white plastic piece is driving me crazy i cant wate for a after market short shifter)

fat mat install pics (still need the special tool to remove the seats and pull carpet)

[killercl0wnfish]

kinda for got to update this for awhile so this might be a big update

got a few of my performance mods in
motiv catless front pipe

red perrin light weight pully

perrin shifter boot


installed a kenwood excelon dnx6990hd ( gotta say its the best head unit ive ever owned or seen)http://www.crutchfield.com/p_113DNX6....html?tp=20222

got a alpine x 12 and alpine 1000watt amp off Craigslist for a good price but the box dident fit so i got a hold of a company that makes alpine x box's



sub really hits hard and shakes the trunk at least 1/4 of a inch and the windshield/roof was shakeing so bad i was worried it was goin to brake the seal on the top middle... anyways long story short i pulled the headliner off and coverd the roof more with fat mat

before

after : sadly took the pic before i rolled it with the tool


last weekend i got bored and went ahead and plasic diped my rims front lip and 2 toned the car ( still not 100% on the two tone but its growning on me )

[Mishimoto]

Nice update! How do you like the performance upgrades?

[killercl0wnfish]

Originally Posted by Mishimoto

Nice update! How do you like the performance upgrades?

exhaust made it have a nice tone wish i had a go pro... as far as performance i could tell a difference at take off and higher rpm so if youre wanting to keep stock exhaust and want a little more tone this is totaly the way to go .....

pully i could tell a big difference in 1st a little less in 2ed a little little less in 3erd and so on .... what i like most is when im on the high way and im crusin at 80 in 6 gear it picks up speed alot faster insted of fallin on its ass ...

trans bushin .... love it ... idk how r y it works but it does ... took out the notchy fell out of the shifts

[Mishimoto]

Nice sounds like they were wise investments.

[Turbowned]

Do you know approx. how much that Fat Mat adds for weight? I've been thinking about that stuff but I'm afraid of the weight penalty...

[killercl0wnfish]

35 pounds for 100 feet.

[Mishimoto]

Originally Posted by killercl0wnfish

35 pounds for 100 feet.

Not really too bad actually.

[JoeBoxer]

Cascade VMax is a very nice sound deadener that doesn't add a lot of weight, i have some AlphaDamp on the way right now i will let you guys know how it works out.

[killercl0wnfish]

Originally Posted by Mishimoto

Not really too bad actually.

Might be a little less .... i just weigh the complete box so minus box,tools,tons of plastic backing might be more like 32 i only added about 90 pounds to my car and from what every one is saying the pully is like takeing 100 pounds off ur car so im guessing i subtrated 10?????

[koteman]

Originally Posted by JoeBoxer

Cascade VMax is a very nice sound deadener that doesn't add a lot of weight, i have some AlphaDamp on the way right now i will let you guys know how it works out.

AlphaDamp is awesome only need like 25-50% coverage and its deadend. it took me 20sq feet to do my whole tC because there is no roof. but it was as dead as my friends with 2-3 layers of peel n seal and 3 layers of fat mat which was 200 sq and mine was way less time and money

[killercl0wnfish]

Originally Posted by koteman

AlphaDamp is awesome only need like 25-50% coverage and its deadend. it took me 20sq feet to do my whole tC because there is no roof. but it was as dead as my friends with 2-3 layers of peel n seal and 3 layers of fat mat which was 200 sq and mine was way less time and money

20 sq. feet
Price: Sales price: $169.99

http://www.caraudioclassifieds.org/f...on-review.html

after watchin almost every youtube video seems like EVERY one is covering 100% of there cars/trucks ... id hate to see the cost of that

[JoeBoxer]

Go to www.diyma.com and get the alphadamp there, enter coupon code fire to save 50% off everything on your order. I got 20ft of alphadamp and the trim panel tools for about $104 shipped.

[koteman]

Originally Posted by killercl0wnfish

20 sq. feet
Price: Sales price: $169.99

http://www.caraudioclassifieds.org/f...on-review.html

after watchin almost every youtube video seems like EVERY one is covering 100% of there cars/trucks ... id hate to see the cost of that

Yes most the people using alpha damp are spl comp guys so it can help them gain like .2 db for 100% coverage but if u read the directions on it it only needs 25% coverage. I did about 50% and its was as good as my friends with 2-3 layers if cheap stuff like fat mat. It's worth the money. I was sceptical before but after I did it it was amazing