Catted front pipe and mid pipe recomenations - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

blsfrs · 03-02-2022, 02:10 PM

I'm looking for recommendations for a catted front pipe and resonated mid pipe. Now that my header is catless, I thought that I might as well upgrade the rest of the system before retuning. I already have an aftermarket overpipe and a Borla axleback.

The quieter the better.

NoHaveMSG · 03-02-2022, 02:56 PM

I really like my nameless front pipe. I run the 3" catted and resonated, they make a 2.5" as well. They are built to order though so the lead times can get a bit long and but they are built to what you want. So if you want to be able to mate it to a stock mid pipe they can put the correct flange on it to use the OE donut gasket. It replaces both the FP and OP so install may require that you unbolt the engine mounts and raise it up to snake it through.

Westen86 · 03-02-2022, 02:56 PM

Youre looking for a catted+resonated front pipe. JDL is the best option there is. But price will be your limiting factor. Get ready to spend $500+. I have a header, OP and catback. Front pipe is stock.

JOSEC · 03-02-2022, 08:48 PM

+1 on JDL Over-Frontpipe combo. I've had many JDL products stemming back to 2015 and all have been awesome, super high quality. Plus lifetime warranty. Can't beat that. Now I personally have Dual resonated 3 inch Over-frontpipe combo. and a 3 Inch JDL Single exit catback.

You can't go wrong with anything JDL. I also recommend Perrin's resonated catback.

blsfrs · 03-02-2022, 09:46 PM

Anybody have experience with PLM or Motiv products. Are they less expensive because they are that much lower quality?

NoHaveMSG · 03-02-2022, 09:53 PM

Quote:

Originally Posted by blsfrs

Anybody have experience with PLM or Motiv products. Are they less expensive because they are that much lower quality?

That and PLM made knock offs of nameless and JDL parts.

blsfrs · 03-02-2022, 10:06 PM

Quote:

Originally Posted by NoHaveMSG

I really like my nameless front pipe. I run the 3" catted and resonated, they make a 2.5" as well. They are built to order though so the lead times can get a bit long and but they are built to what you want. So if you want to be able to mate it to a stock mid pipe they can put the correct flange on it to use the OE donut gasket. It replaces both the FP and OP so install may require that you unbolt the engine mounts and raise it up to snake it through.

Do you have the Helmholtz resonator?

NoHaveMSG · 03-02-2022, 10:24 PM

Quote:

Originally Posted by blsfrs

Do you have the Helmholtz resonator?

Yes.

jflogerzi · 03-03-2022, 03:44 PM

JDL and Nameless Combo is Front Pipe+OP. It does not replace the mid pipe which is the s-pipe that connects to the muffler. 99% of catback systems replace this pipe FYI. Axlebacks do not replace this pipe.

norcalpb · 03-03-2022, 07:13 PM

Works make a mid pipe that bolts to most axle backs but it seems like they want $10,000 for it.

https://store.worksmotorsports.com/W..._p/146.211.htm

blsfrs · 03-04-2022, 10:32 AM

Quote:

Originally Posted by norcalpb

Works make a mid pipe that bolts to most axle backs but it seems like they want $10,000 for it.

https://store.worksmotorsports.com/W..._p/146.211.htm

Maybe I'll get 2 of them so I have a spare.

jflogerzi · 03-04-2022, 05:54 PM

If your staying NA, stay with the stock mid-pipe and just get an axleback. If your going Catless Headers, you want as many resonators as you can get

NoHaveMSG · 03-04-2022, 05:59 PM

Quote:

Originally Posted by jflogerzi

If your staying NA, stay with the stock mid-pipe and just get an axleback. If your going Catless Headers, you want as many resonators as you can get

I have one, it's not bad with it.

whataboutbob · 03-05-2022, 02:00 AM

Quote:

Originally Posted by NoHaveMSG

That and PLM made knock offs of nameless and JDL parts.

^ this

03-02-2022, 02:10 PM	#1
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,441 Thanks: 2,692 Thanked 1,451 Times in 686 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Catted front pipe and mid pipe recomenations I'm looking for recommendations for a catted front pipe and resonated mid pipe. Now that my header is catless, I thought that I might as well upgrade the rest of the system before retuning. I already have an aftermarket overpipe and a Borla axleback. The quieter the better.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTT Invidia catless front pipe for a resonated/catted front pipe	nickmerronesucks	Want-To-Buy Requests	3	05-10-2016 03:25 PM
Gains from aftermarket catted front pipe vs stock front pipe?	Vmax911	Engine, Exhaust, Transmission	4	01-20-2014 02:42 PM
Group Buy: TSUDO Performance Hi-Flow catted Test Pipe/Front Pipe/ Downpipe	JonMotoring	Groupbuys	65	08-27-2013 01:33 PM
WTB: Perrin Over Pipe + Catted Front Pipe + Cat Back (Resonated)	coolaron	Engine, Exhaust, Bolt-Ons	0	07-13-2013 04:37 PM

03-02-2022, 08:48 PM	#4
JOSEC Member Join Date: Dec 2013 Drives: 2014 Subaru BRZ WRB Location: Houston TX. Daytona Beach FL. Posts: 75 Thanks: 15 Thanked 38 Times in 28 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	+1 on JDL Over-Frontpipe combo. I've had many JDL products stemming back to 2015 and all have been awesome, super high quality. Plus lifetime warranty. Can't beat that. Now I personally have Dual resonated 3 inch Over-frontpipe combo. and a 3 Inch JDL Single exit catback. You can't go wrong with anything JDL. I also recommend Perrin's resonated catback.

03-02-2022, 09:46 PM	#5
blsfrs Senior Member Join Date: Dec 2018 Drives: 2013 frs base Location: central Virginia Posts: 1,441 Thanks: 2,692 Thanked 1,451 Times in 686 Posts Mentioned: 13 Post(s) Tagged: 0 Thread(s)	Anybody have experience with PLM or Motiv products. Are they less expensive because they are that much lower quality?

03-03-2022, 07:13 PM	#10
norcalpb Senior Member Join Date: Oct 2013 Drives: 2013 BRZ, 2023 Model 3 Location: SF Bay Area Posts: 2,345 Thanks: 1,256 Thanked 902 Times in 590 Posts Mentioned: 15 Post(s) Tagged: 0 Thread(s)	Works make a mid pipe that bolts to most axle backs but it seems like they want $10,000 for it. https://store.worksmotorsports.com/W..._p/146.211.htm

User Name		Remember Me?
Password