Looking for TRD CAI part - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

WolF_RS · 02-08-2016, 03:09 AM

Hey guys! I just recently bought a used TRD CAI from someone and while installing I noticed the kit had everything EXCEPT the grommet that holds the intake to the body frame itself. It's included in the hardware kit for the intake, but I don't want to spend $50 on a whole kit to only use the grommet piece. If anyone has the specific piece laying around please let me know. It's specifically item #7 on page 1 and 2, and a close image of the grommet on page 9, figure 3-7. Thank you!

I'll attach links to the images due to the fact it won't let me upload any images from my phone.
http://www.trdsparks.com/install/PTR03-18130inst.pdf

MaxxCann · 02-08-2016, 12:56 PM

Good luck man, I lost mine at first; I looked for that thing forever and luckily found it. I couldn't find an equivalent online because of the weird measurements of it. You may get stuck buying the accessory kit to get it.

WolF_RS · 02-08-2016, 01:12 PM

Thanks man! Hopefully someone pops up with an extra grommet. I've been told to go to Home Depot and AutoZone, but I know the grommets they have in stock aren't going to hold the intake properly due to the way the inside is cut to fit the extended piece on the intake.

Summerwolf · 02-08-2016, 01:23 PM

I bought a grommet from advance and it worked fine. Still rolling it nearly 10K later. Think the package cost 5 bucks or so and had multiple grommets.

MaxxCann · 02-08-2016, 11:46 PM

Yeah the grommet is nothing special, all you need is something to hold that little peg in place, the two bolts do most of the work. If you can find any grommet that will fit in that little hole and has an inner hole small enough to hold that little peg, you're good. There is nothing special about it other than its smaller on one side than the other.

WolF_RS · 02-09-2016, 02:30 AM

Thanks guys!^^

NahumCC · 09-12-2016, 12:06 AM

So I found myself in the same situation doing mine tonight so I sailored it by using the left over rubber bushing from the third screw not utilized from the OEM airbox.

Sent from my SAMSUNG-SM-G891A using Tapatalk

F R YESS · 09-12-2016, 02:46 AM

Same here lol package of grommets from harbor freight had a size that worked for me 👍🏼

Sent from my iPhone using Tapatalk

02-08-2016, 03:09 AM	#1
WolF_RS Senior Member Join Date: Apr 2015 Drives: 2015 Ultramarine Scion FR-S (MT) Location: Los Angeles, CA Posts: 103 Thanks: 11 Thanked 8 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	Looking for TRD CAI part Hey guys! I just recently bought a used TRD CAI from someone and while installing I noticed the kit had everything EXCEPT the grommet that holds the intake to the body frame itself. It's included in the hardware kit for the intake, but I don't want to spend $50 on a whole kit to only use the grommet piece. If anyone has the specific piece laying around please let me know. It's specifically item #7 on page 1 and 2, and a close image of the grommet on page 9, figure 3-7. Thank you! I'll attach links to the images due to the fact it won't let me upload any images from my phone. http://www.trdsparks.com/install/PTR03-18130inst.pdf

02-08-2016, 12:56 PM	#2
MaxxCann Member Join Date: Mar 2015 Drives: 2013 Scion FR-S Location: Stockton, ca Posts: 38 Thanks: 6 Thanked 7 Times in 5 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Good luck man, I lost mine at first; I looked for that thing forever and luckily found it. I couldn't find an equivalent online because of the weird measurements of it. You may get stuck buying the accessory kit to get it. __________________ 2013 Asphalt FR-86 (badge conversion) \| TRD wheels \| TRD CAI \| TRD exhaust \| TRD lowering springs \| TRD front strut tower brace \| TRD door stabilizers \| TRD member brace kit \| TRD spoiler \| TRD quick shifter \| TRD door speaker panels \| TRD seat gap fillers \| GT86 Armrest \| Red Perrin Lightweight Pulleys, Drift Button, and Reverse Lockout \| Winjet Foglights \| Full LED swap \| Custom dash and HVAC LEDs

02-08-2016, 11:46 PM	#5
MaxxCann Member Join Date: Mar 2015 Drives: 2013 Scion FR-S Location: Stockton, ca Posts: 38 Thanks: 6 Thanked 7 Times in 5 Posts Mentioned: 1 Post(s) Tagged: 1 Thread(s)	Yeah the grommet is nothing special, all you need is something to hold that little peg in place, the two bolts do most of the work. If you can find any grommet that will fit in that little hole and has an inner hole small enough to hold that little peg, you're good. There is nothing special about it other than its smaller on one side than the other. __________________ 2013 Asphalt FR-86 (badge conversion) \| TRD wheels \| TRD CAI \| TRD exhaust \| TRD lowering springs \| TRD front strut tower brace \| TRD door stabilizers \| TRD member brace kit \| TRD spoiler \| TRD quick shifter \| TRD door speaker panels \| TRD seat gap fillers \| GT86 Armrest \| Red Perrin Lightweight Pulleys, Drift Button, and Reverse Lockout \| Winjet Foglights \| Full LED swap \| Custom dash and HVAC LEDs

09-12-2016, 02:46 AM	#8
F R YESS Member Join Date: May 2016 Drives: 2015 Firestorm FR-S Location: Modesto, California Posts: 52 Thanks: 26 Thanked 18 Times in 14 Posts Mentioned: 1 Post(s) Tagged: 0 Thread(s)	Same here lol package of grommets from harbor freight had a size that worked for me 👍🏼 Sent from my iPhone using Tapatalk __________________ Not trying to make it perfect; I'm just trying to make it. 2015 Scion FR-S 6MT 2016 Subaru Crosstrek CVT 1972 Chevy C10 Shortbed 2018 Honda Civic Si Sedan

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

02-08-2016, 01:12 PM	#3
WolF_RS Senior Member Join Date: Apr 2015 Drives: 2015 Ultramarine Scion FR-S (MT) Location: Los Angeles, CA Posts: 103 Thanks: 11 Thanked 8 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	Thanks man! Hopefully someone pops up with an extra grommet. I've been told to go to Home Depot and AutoZone, but I know the grommets they have in stock aren't going to hold the intake properly due to the way the inside is cut to fit the extended piece on the intake.

02-08-2016, 01:23 PM	#4
Summerwolf Panda Trueno Join Date: Jan 2015 Drives: No twin now. Location: North Indiana Posts: 3,349 Thanks: 2,113 Thanked 2,409 Times in 1,332 Posts Mentioned: 17 Post(s) Tagged: 2 Thread(s)	I bought a grommet from advance and it worked fine. Still rolling it nearly 10K later. Think the package cost 5 bucks or so and had multiple grommets.

02-09-2016, 02:30 AM	#6
WolF_RS Senior Member Join Date: Apr 2015 Drives: 2015 Ultramarine Scion FR-S (MT) Location: Los Angeles, CA Posts: 103 Thanks: 11 Thanked 8 Times in 8 Posts Mentioned: 0 Post(s) Tagged: 2 Thread(s)	Thanks guys!^^

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Part out	drewdrifter	Engine, Exhaust, Bolt-Ons	16	05-16-2015 09:12 PM
Found some rust on a part... what part is this, and is it a problem?	flashburn	Suspension \| Chassis \| Brakes -- Sponsored by 949 Racing	3	05-02-2015 10:56 PM
Can ANY vendor get me this aero part!? I have part#	VakaGT	Want-To-Buy Requests	0	03-19-2015 12:56 PM
Got hit (bumped)! Need part number for the black part of bumper.	scottsampaio.com	Cosmetic Maintenance (Wash, Wax, Detailing, Body Repairs)	27	04-25-2014 01:05 AM

User Name		Remember Me?
Password