Just bought my N1 exhaust. How easy is the install? - Page 2 - Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community

Rapiddan45 · 06-03-2015, 06:35 PM

Channel locks work great for that, and you can use them for way more than just exhaust hangers.

wil5bart · 06-22-2015, 12:12 PM

If you have no experience installing an exhaust, it's better to ask your knowledgeable friend for assistance.

Bergen23 · 06-22-2015, 12:40 PM

Quote:

Originally Posted by wil5bart

If you have no experience installing an exhaust, it's better to ask your knowledgeable friend for assistance.

Not necessary. I used a DIY I found online and went right at 'er. Although, I'm fairly handy and have a basic understanding of how things go together.

Marco_86 · 06-22-2015, 02:17 PM

Quote:

Originally Posted by wil5bart

If you have no experience installing an exhaust, it's better to ask your knowledgeable friend for assistance.

Highly doubt he needs the advice anymore

RobertPaulson · 06-22-2015, 02:18 PM

Quote:

Originally Posted by Bergen23

Not necessary. I used a DIY I found online and went right at 'er. Although, I'm fairly handy and have a basic understanding of how things go together.

this, find a DIY or the install instruction online, its super easy, just take your time, hand tighten everything first to make sure it lines up and then finish by tightening with a ratchet.

donoman · 06-23-2015, 12:30 AM

Don't use WD40 to lubricate hangers. Use soapy water.

Sammakko · 06-23-2015, 12:41 AM

Quote:

Originally Posted by donoman

Don't use WD40 to lubricate hangers. Use soapy water.

astroglide...

or so i've heard

06-03-2015, 06:35 PM	#15
Rapiddan45 Senior Member Join Date: Aug 2013 Drives: 2013 FR-S M/T Ultramarine Location: Hill AFB, Utah Posts: 127 Thanks: 41 Thanked 103 Times in 50 Posts Mentioned: 8 Post(s) Tagged: 0 Thread(s)	Channel locks work great for that, and you can use them for way more than just exhaust hangers. __________________ 2013 Ultramarine 6MT- Feal 441 coils, Whiteline 20mm front/18mm rear swaybars. RPF1 17x9 +35. 245/40/17 RS-3 V2. OFH, Invidia OP, Spencer Fab HFC FP, Invidia N1 C38 JRSC, JROC, Delicious Tune, Radium PCV Catch Can

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another Nexus 7 install: Clean and Easy	Sojhinn	Electronics \| Audio \| NAV \| Infotainment	264	10-30-2015 09:26 AM
EZCarLift Easy car lift portable super easy car lift	bren5279	Mechanical Maintenance and Tools	16	09-11-2015 02:57 PM
Any Really Good Exhaust Shops in Easy Bay??	F1fletch	Northern California	5	02-17-2015 09:51 PM
FI Guys: Were you more excited when you bought your car, or when you bought boost?	husker741	Forced Induction	28	02-25-2014 04:57 PM
Forester XT/Legacy GT exhaust tips on the twins stock muffler (easy/cheap option)	Kostamojen	Engine, Exhaust, Transmission	8	09-08-2013 02:36 PM

06-22-2015, 12:12 PM	#16
wil5bart Senior Member Join Date: Mar 2015 Drives: '16 BRZ Location: SC Posts: 106 Thanks: 2 Thanked 21 Times in 17 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	If you have no experience installing an exhaust, it's better to ask your knowledgeable friend for assistance.

06-23-2015, 12:30 AM	#20
donoman Senior Member Join Date: Jan 2015 Drives: '13 FR-S Location: San Jose, CA Posts: 277 Thanks: 6 Thanked 87 Times in 48 Posts Mentioned: 3 Post(s) Tagged: 0 Thread(s)	Don't use WD40 to lubricate hangers. Use soapy water.

User Name		Remember Me?
Password